2. Premier Mounts
  3. PCC-2

Premier Mounts PCC-2 User guide

  • I have reviewed the PCC-2 Installation Guide, which details the steps for mounting and securing the PCC-2 clamp. This document describes how to attach the clamp to a truss tube and connect a 2" pipe, using a safety screw. I am ready to answer your questions about the product and the installation process.
  • What is the first step in installing the PCC-2?
    What size truss tubes does the upper clamp body fit?
    How do you secure the pipe to the coupler assembly?
Installation Guide
Instructions
1) Loosen the cheeseborough clamp nut to fully open position.
2) Place the upper clamp body over the 1 1/2” or 2” ceiling truss tube and place the
1/2” clamp nut to secure the clamp assembly to the truss.
3) Once you have the PCC-2 at the desired position on the truss tube firmly tighten
the 1/2” clamp nut to secure the clamp assembly to the truss.
4) Thread the mating 2” Pipe fully into the coupler assembly.
5) Secure the pipe to the coupler assembly by installing the safety screw.
6) Recheck all mating points for security of install.
Safety Screw
Coupler Assembly
2” Pipe
Upper Clamp
Truss Tube
PCC-2
9533-112-001- 0X_2
premiermounts.com | p. 800.368.9700 | e. [email protected]
500 W Central Ave, Suite A, Brea, CA 92821 USA
/