ML Accessories OH20MB User manual

Type
User manual

This manual is also suitable for

ML Accessories OH20MB is an indoor or outdoor covered areas heater, that provides warmth and comfort. It features:

  • a minimum installation height of 1.8m, ensuring safety and preventing accidental burns
  • IP20 rating, making it suitable for use in dry indoor spaces or covered outdoor areas
  • a horizontal wall-mounted installation, maximizing space utilization
  • a cable clip for easy and secure cable management
  • a requirement for a 13A socket per unit, ensuring sufficient power supply for efficient heating
  • a simple installation process guided by the included bracket template
  • a sleek design that complements various indoor and outdoor settings

ML Accessories OH20MB is an indoor or outdoor covered areas heater, that provides warmth and comfort. It features:

  • a minimum installation height of 1.8m, ensuring safety and preventing accidental burns
  • IP20 rating, making it suitable for use in dry indoor spaces or covered outdoor areas
  • a horizontal wall-mounted installation, maximizing space utilization
  • a cable clip for easy and secure cable management
  • a requirement for a 13A socket per unit, ensuring sufficient power supply for efficient heating
  • a simple installation process guided by the included bracket template
  • a sleek design that complements various indoor and outdoor settings
INSTALLATION & MAINTENANCE MANUAL
OH20MB
These instructions should be read carefully and retained after installation by the
end user for future reference and maintenance.
These instructions should be used to aid installation of the following product:
OH20MB
GENERAL INSTRUCTIONS
SAFETY
This product must be connected to a socket outlet which is suitable for the power
rating of this appliance. If in any doubt, please consult a qualified electrician
Never install the unit where it could be subject to:
- Storage of inflammable or explosive products
- Flammable atmosphere, such as flammable sprays or gas
- Rooms that could have excessive moisture, such as bathrooms
This unit should only be installed at minimum 1.8m in height and in a place that it
cannot be touched by hand as the unit becomes hot while in use
Do not insert any foreign objects or body parts through the protective grille while in use
or when the product is still hot
Do not stare at the light for long periods of time
Do not place any items of clothing, towels, or any fabric material over the product to dry
INSTALLATION
Note – Please note that this product is not designed to be used by persons (including
children) with reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
Note – This product is designed for wall installation only, horizontally at a minimum height
of 1.8m and it must have a minimum of 0.25m air gap from the ceiling and away from the
walls and other structures (see Fig. 1)
Provide power to the required point of installation (a 13A socket is required per unit)
Using the bracket as a template, mark the location for, and drill the fixing holes ensuring
not to infringe with any gas/water pipes or electrical cables. Fix the bracket to the wall
using the screws provided (see Fig.1)
Fix the body of the heater to the bracket and insert the cable into the cable clip (see Fig.1)
Any adjustment to the bracket must be done after the product has been turned off and
plenty of time has been allowed for it to cool
Please note the IP (Ingress Protection) rating of this product when deciding the location
for installation
This product is for indoor or outdoor covered areas only
This product is Class I and must be earthed
This product is IP20 rated
Fig. 1
INSTALLATION & MAINTENANCE MANUAL
These instructions should be read carefully and retained after installation by the end user for future reference
and maintenance.
These instructions should be used to aid installation of the following product:
OH20MB
SAFETY
This product must be connected to a socket outlet which is suitable for the power rating of this
appliance. If in any doubt, please consult a qualified electrician
Never install the unit where it could be subject to:
oStorage of inflammable or explosive products
oFlammable atmosphere, such as flammable sprays or gas
oRooms that could have excessive moisture, such as bathrooms
This unit should only be installed at minimum 1.8m in height and in a place that it cannot be touched by
hand as the unit becomes hot while in use
Do not insert any foreign objects or body parts through the protective grillewhile in use or when the
product is still hot
Do not stare at the light for long periods of time
Do not place any items of clothing, towels, or any fabric material over the product to dry
Any adjustment to the bracket must be done after the product has been turned off and plenty of time
has been allowed for it to cool
Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
This product is for indoor use only
This product is Class I and must be earthed
This product is IP20 rated
INSTALLATION
Note Please note that this product is not designed to be used by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction
Note This product is designed for wall installation only, horizontally at a minimum height of 1.8m and it must
have a minimum of 0.25m air gap from the ceiling and away from the walls and other structures (see Fig. 1)
Provide power to the required point of installation (a 13A socket is required per unit)
Using the bracket as a template, mark the location for, and drill the fixing holes ensuring not to infringe
with any gas/water pipes or electrical cables. Fix the bracket to the wall using the screws provided (see
Fig.1)
Fix the body of the heater to the bracket and insert the cable into the cable clip (see Fig.1)
Fig . 1
WARRANTY
This product has a warranty of 2 years from date of purchase. Failure to install this product
in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper
use, or removal of the batch code will invalidate the warranty. If this product should fail
within its warranty period, it should be returned to the place of purchase for a free of
charge replacement. ML Accessories does not accept responsibility for any installation
costs associated with the replacement product. Your statutory rights are not affected. ML
Accessories reserve the right to alter product specification without prior notice.
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or
insulation resistance testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which
may damage the product.
This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where facilities exist.
AVFEB22_V1
11
Supplied By:
(UK) Manufacturer
ML Accessories Ltd, Unit E Chiltern Park, Boscombe Road,
Dunstable LU5 4LT, www.mlaccessories.co.uk
(EU) Authorised Representative
nnuks Holding GmbH, Niederkasseler Lohweg 18, 40547
Düsseldorf, Germany, www.nnuks.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ML Accessories OH20MB User manual

Type
User manual
This manual is also suitable for

ML Accessories OH20MB is an indoor or outdoor covered areas heater, that provides warmth and comfort. It features:

  • a minimum installation height of 1.8m, ensuring safety and preventing accidental burns
  • IP20 rating, making it suitable for use in dry indoor spaces or covered outdoor areas
  • a horizontal wall-mounted installation, maximizing space utilization
  • a cable clip for easy and secure cable management
  • a requirement for a 13A socket per unit, ensuring sufficient power supply for efficient heating
  • a simple installation process guided by the included bracket template
  • a sleek design that complements various indoor and outdoor settings

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI