Page is loading ...
Assembly Instructions
ARDEO
Multi-bulb Sconce
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Page 2 of 5
PARTS INVENTORY
ID DESCRIPTION QTY
CROSSBAR BRACKET 1
MOUNTING SCREW 2
WIRE NUT 3
SHORT GREEN SCREW 1
WALL BASE 1
SCREW NUT 2
BULB E26 G45 4W LED 3
GLASS SHADE 3
2
DIFFICULTY
20 min
TIME # OF PEOPLE
REQUIRED TOOLS
ARDEO Multi-bulb Sconce
Page 3 of 5
2
1
Thread wires through crossbar bracket
(A) before attaching to junction box.
!
CAUTION
Turn o power at main circuit panel
before starting installation.
ARDEO Multi-bulb Sconce
Page 4 of 5
3
Match up wires by color and
attach with wire nuts (C).
BLACK: Live
WHITE: Neutral
GREEN OR BARE COPPER: Ground wire
!
If junction box does not have a green
ground wire, attach ground wire from
lamp to short green screw (D) on crossbar.
!
ARDEO Multi-bulb Sconce
Page 5 of 5
4
5
ARDEO Multi-Bulb Sconce
To assemble glass turn
in clockwise direction.
!
To disassemble glass turn
anti-clockwise direction.
!
/
