Page is loading ...
Assembly Instructions
CADZA
Pendant Lamp
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
Page 2 of 4
TIME
# OF PEOPLE
5
DIFFICULTY
TOOL FREE
30 min
CADZA Pendant Lamp
PARTS INVENTORY
ID DESCRIPTION QTY
CROSS BAR BRACKET
PREINSTALLED 1
SCREW 2
WIRE NUT 3
SHORT GREEN CREW
PREINSTALLED 1
CANDY PLATE 1
MEDIUM SCREW 2
LAMP BODY 1
BULB E26 4W LED G50 7
Consultation with a professional electrician is
reccomended for the installation of this pendant lamp.
CAUTION
Turn o power at main circuit panel
before starting installation.
Page 3 of 4
Remove crossbar bracket
(A) from canopy plate (E)
and thread wires through
before attaching to
junction box.
!
2
1
Match up wires by color and attach
with wire nuts (c).
BLACK: Live
WHITE: Neutral
GREEN: Ground (shown as striped)
!
If junction box does not have a green
ground wire, attach ground wire from
lamp to small green screw (D) on crossbar.
!
CADZA Pendant Lamp
Page 4 of 4
3
4
CADZA Pendant Lamp
/
