2. AGPtek
  3. H7 Car LED Bulbs
H7 Car LED Bulbs

AGPtek H7 Car LED Bulbs, H7 User manual

  • Hello! I am an AI chatbot trained to assist you with the AGPtek H7 Car LED Bulbs User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the wattage and voltage of the AGPtek H7 LED bulbs?
    Where can I use these LED bulbs?
    What type of bulb base do these LED bulbs have?
    Can I touch the LED chipset during installation?
    When should I replace the LED bulbs?
    Do these LED bulbs comply with any regulations?
H7 CAR LED BULBS
User Manual
Page is loading ...
1
Specifications
Important Tips
1. During installing, do not touch LED chipset.
2. When replacing, please replace a pair of LED bulbs at
the same time to ensure the best lighting effect and
driving safety.
3. If you find that the car lights’ brightness are dim, please
replace them with new high-quality lights in time. This
product has passed ECE certification and complies with
EU applicable laws on road traffic. If you have any
problem about this product, please feel free to contact
us at [email protected].
Installation
Model
H7
Watt/Voltage
30W/12V
Application
For car & motorbike
Bulb base
PX26d
1. Open the hood, and
then open the dust
cover.
2. Find and remove the
original halogen bulbs.
2
3. Move out the chuck
of the LED bulb.
IMPORTANT NOTE: When you plug the bulbs into the
socket but do not light up, just rotate the plug 180
degrees and then insert it.
4. Install the LED chuck
into the pedestal.
5. Install the LED bulb
and adjust its
position.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/