Contact Belle Forêt at (800) 880-8164. Copyright ©2014, World Imports Decorative Plumbing. All rights reserved.
PAGE 2
UNDERMOUNT STAINLESS STEEL SINK
INSTALLATION INSTRUCTIONS
1: PREP COUNTERTOP
measurements.
d IMPORTANT: The cabinet must be installed, secured, plumb, and level
BEFORE installing the sink.
d IMPORTANT: Belle Forêt undermount sinks should only be fastened to a solid
surface countertop (i.e. granite, Corian® or Silestone®).
d IMPORTANT: The enclosed cutout template will create a countertop opening
with a minimal (1/8” or less) reveal. It is recommended that you discuss
this with your installer and agree that this nished appearance is the
desired eect. Belle Forêt is not responsible for improper sink or countertop
installaons.
d IMPORTANT: Belle Forêt is not responsible for sink or countertop if damaged
during installaon. Be sure to inspect the sink for damage prior to beginning
installaon.
2: INSTALL COUNTERTOP
3: FINAL STEPS
d IMPORTANT: For addional informaon or warranty issues contact Belle Forêt directly at:
Belle Forêt Warranty Dept, World Imports Decorave Plumbing
3074 Chastain Meadows Parkway
Mariea, GA 30066
(800) 880-8164
OUTLINE FOR UNDERMOUNT
SINK CUTOUT
MOUNTING BRACKET
INVERTED COUNTERTOP
FASTENER
APPLY SILICONE SEALANT AFTER CLEANING THE
SINK EDGE AND COUNTERTOP
VERIFY SINK IS CENTERED WITHIN THE COUNTER
TOP OPENING BEFORE TIGHTENING FASTENERS.