2. Home
  3. Domestic appliances
  4. Small kitchen appliances
  5. Coffee makers
  6. Coffee making accessories
  7. Coffee Queen
  8. touchscreen
touchscreen

Coffee Queen touchscreen User manual

  • Hello! I am an AI chatbot trained to assist you with the Coffee Queen touchscreen User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How to enable the energy-saving mode?
    How to exit the screen saver mode?
    How to enter the service menu?
    How to brew a cup of coffee?
    How to brew coffee in a jug?
    How to clean the brewing mechanism?
    How to clean the blender bowls?
    How to clean the valves?
    How to rotate the brewing mechanism without water and ingredients?
    How to rinse the brewing mechanism?
USER GUIDE
(Touchscreen)
U_EN
Rev. 111108
Your dealer
1. CONTENTS. CQube Touchscreen
1. Contents page 2
2. General/Description: 3
3. Operating mode 4
4. Energy-saving mode 5
5. Screen saver 6
6. Service menu 7
7. Component overview, front 8
7. Component overview, inside door 9
7. User card overview 10
8. Operation;
Drink selection 11
Brewing coffee in a cup 12
Brewing coffee in a jug 13
9. Cleaning program
Complete cleaning of the brewing mechanism 14-16
Cleaning the blender bowls 17
Cleaning the valves 18
Opening the brewing mechanism 19
Rinsing the brewing mechanism 20
10. Counters Number of cups and resetting counters 21
11. Use and care 22
2.
3.
2. GENERAL/DESCRIPTION. CQube Touchscreen
Quick guide showing the functions and messages you will come into contact with
on a daily basis.
The screen is touch sensitive and is intended to be used with the fi ngers.
NOTE!
Never use any type of tool to press on the screen.
4.
3. OPERATING MODE. CQube Touchscreen
OPERATING MODE:
The menu displayed on start up and when the coffee machine is ready to serve drinks.
5.
4. ENERGY-SAVING MODE. CQube Touchscreen
ENERGY-SAVING MODE:
In energy-saving mode the machine switches off the front display and decreases
the temperature in the water tank to approx. 65°C.
PRESS here
to enter Energy-saving mode
TOUCH THE SCREEN TO RETURN TO OPERATING MODE:
6.
5. SCREEN SAVER. CQube Touchscreen
SCREEN SAVER:
Screen saver:
TOUCH THE SCREEN TO RETURN TO OPERATING MODE:
7.
6. SERVICE MENU. CQube Touchscreen
SERVICE MENU:
This menu is displayed when you use the service card. (green card).
See the user manual and "PROGRAMMING".
Drip cover
Drip tray
Cup shelf
Tap for
water drinks
8.
7. COMPONENT OVERVIEW, FRONT. CQube Touchscreen
Touchscreen
Door lock
Accessories;
Base cabinet with carbonic acid tube and cooler
Tap for
hot drinks
Bean canister
Card reader
Component overview, front
9.
7. COMPONENT OVERVIEW, INSIDE DOOR. CQube Touchscreen
Component overview, inside door.
Cleaning buttons.
Cleaning buttons
Membrane switch
cleaning
buttons
Menu cleaning
buttons
10.
User card.
Insert the user card as shown in the image.
The display shows Service Menu,
Jug Beverage, Clean Machine, Counters and you can
now step through the menu.
To use the machine again, remove the card and
store it in a safe place.
User card item number: 1602692.
The user card is used for cleaning and setting jug beverages. The
user card is supplied by your dealer.
7. Overview: USER CARD. CQube Touchscreen
8. OPERATION. DRINK SELECTION. CQube Touchscreen
The touchscreen is very easy to use as it shows you how to move through the
menu. The description given in the manual is a concise supplement with
text and images. See also the manual for the touchscreen.
If the machine is in screen saver mode or energy-saving mode.
TOUCH THE SCREEN TO RETURN TO OPERATING MODE:
PRESS for desired drink.
NOTE! Place a cup beneath the tap for drinks before you take a drink.
The Strength and Volume of drinks are preset.
If you would like to increase or decrease these settings, Press
the + button to increase
or press the -button to decrease
PRESS START after drink selection.
11.
1. Place a cup under the coffee tap (A).
2. Select coffee drink. To step through the menu.
3. For a stronger drink, press the + button. For a weaker drink, press the - button
4. Press the START button.
5. The machine brews the coffee. The display shows "Please wait", and the cup light
illuminates. Wait until the cup light switches off and the text "Please wait" has disap-
peared from the display before removing the cup.
12.
8. OPERATION. BREWING A CUP OF COFFEE. CQube Touchscreen
SERVE DRINKS: CUP OF COFFEE.
If the coffee machine is in energy-saving or screen saver mode. Touch the screen to re-
turn to operating mode. To serve a cup of coffee.
Do the following:
A C
B
1. Put a jug under the tap (A) for Coffee by folding up the cup shelf.
2. Insert the card in the card reader (B).
3. The display reads: Service Menu, Jug Beverage. Figure A
4. Press the button for Jug Beverage.
5. Change the number of cups you want to brew in your jug. ( 6 cup brewing is the
default setting) with the + or - buttons.
Brewing can be set for between 1 and 12 cups.
6. Remove the user card.
The display shows the Coffee menu
7. Press the button for Coffee.
Wait until the cup light switches off and the message "Please wait" has
disappeared from the display before removing the jug.
8. Remove the user card.
NOTE! If no selection is made, remove the user card. To stop press the STOP button.
13.
8. OPERATION. BREWING COFFEE IN A JUG. CQube Touchscreen
SERVE DRINKS: JUG OF COFFEE.
To serve a jug of coffee. Do the following:
1. Insert the user card in the card reader (B)
2. The display shows Service Menu, Clean Machine.
3. Press the Clean Machine button.
4. Step through the menu until the display shows Select Cleaning, Clean Brewer.
5. The display shows Open Door, Fill Detergent.
Open door. The display shows; Fill Detergent, Close Door.
6.
Put 25gr (one portion sachet) of cleaning agent (fi gure A) in the brewing mechanism.
See fi gure B. (Cleaning agent is provided by your dealer)
7. Close the door. Figure B
The display shows Place Jug, Enter To Start.
8. NOTE! Put a 1 litre container under the Coffee tap.
9. Press the Enter button to start cleaning.
10. The display shows Preparing Brewer, Please Wait.
11. The display shows Cleaning Brewer, Time Left 300s.
The machine counts down from 300 seconds.
12. The display shows Rinsing Brewer, Cycles left 7.
The display shows Select Cleaning, Clean Brewer when the cleaning is complete.
13. Remove the user card
NOTE! When the cleaning agent has been added, the process
must not be interrupted
but must be allowed to fi nish.
14. IMPORTANT! After having performed the automatic cleaning of
the brewing mechanism, you should carry out cleaning of the brewing
chamber to remove any cleaning agent or coffee remains!
14.
A
B
9. CLEANING PROGRAM. CLEAN BREWING MECH. CQube Touchscreen
Automatic cleaning of the brewing mechanism:
Cleaning of the brewing mechanism should be done once a week.
Figure A
15.
9. CLEANING PROGRAM. CLEAN BREWING MECH. CQube Touchscreen
Automatic cleaning of the brewing mechanism:
Cleaning of the brewing mechanism should be done once a week.
IMPORTANT!
Cleaning of the brewing chamber to remove any cleaning agent or coffee remains!
Disassemble and clean the brewing chamber. Open Brewer
1. Insert the user card in the card reader (B)
2. Step through the menu until the display shows Service Menu,
Clean Machine.
3. Press the Enter button.
4. The display shows Select Cleaning, Open Brewer.
5. Press the Enter button.
6. The display shows Open Brewer.
See instructions on next page!
7. Open the door, disassemble, clean and reassemble the brewing chamber.
8. Close the door.
9. Press the Enter button to return to normal mode.
10. Remove the user card.
11. Pour a cup of coffee and discard it.
The Open Brewer function can be used to rotate the brewing mechanism to the correct
position.
NOTE! The "winder” should be in the 8 o'clock position. If it is not, remove again and re-
peat the procedure.
8 o'clock
Disassemble the brewing chamber.
1. 2.
Supplementary fl ushing/cleaning of the brewing chamber.
Reassemble the brewing chamber
NOTE! Rinse clean!
To remove any cleaning agent or coffee remains!
3.
NOTE! When the brewing chamber
is reassembled, ensure that the
rubber scraper (B) is located
between the rocker arms (A).
16.
9. CLEANING PROGRAM. CLEAN BREWING MECH. CQube Touchscreen
Automatic cleaning of the brewing mechanism:
Cleaning of the brewing mechanism should be done once a week.
1.
Lift up the cup shelf. Place a container of approx. 150 ml beneath the tap for Coffee (A).
2. Insert the user card in the card reader (B)
3. The display shows Service Menu, Clean Machine.
4. Press the Clean Machine button.
5. Step through the menu until the display shows Select Cleaning, Mixer.
6. Press the Enter button.
7. The machine will now clean the blender bowls for approx. 5 seconds.
NOTE! Repeat the cleaning procedure 2-3 times.
8. Remove the user card.
17.
A
B
9. CLEANING PROGRAM. CLEAN THE BLENDER BOWL. CQube Touchscreen
Automatic rinsing of the blender bowls, at least once a day.
1. Place a container holding approx. 150 ml beneath both the Coffee (A) and Water
(C) taps by folding up the cup shelf.
2. Insert the card in the card reader (B).
3. The display shows Service Menu, Clean Machine.
4. Press the Clean Machine button.
5. Step through the menu until the display shows Select Cleaning, Clean Valves.
6. Press the Enter button.
7. The outlet valves will start to open and close at 3 pulses per second for
maximum 6 seconds. Repeat the procedure 2 - 3 times.
8. Remove the user card.
18.
9. CLEANING PROGRAM. CLEANING OF VALVES. CQube Touchscreen
Automatic cleaning of dispenser valves:
Cleaning entails the valves "knocking" off any lime scale and other
particles that may get stuck in the cylinders, and fl ushing them with water.
B
A C
1. Insert the card in the card reader (B).
The display shows Service Menu, Clean Machine.
2. Press the Clean Machine button.
3. Step through the menu to Select Cleaning, Open Brewer.
4. Press the Enter button.
The display shows Opening Brewer, Brewer Open, Open Door.
The brewing mechanism is now in the open position and can be removed.
5. OPEN the door.
The display shows Close Door, Press Enter.
6. CLOSE the door.
The display shows Closing Brewer.
7. Remove the card
NOTE! The winder” should be in the 8 o'clock position.
If not, remove again and repeat the process.
19.
9. CLEANING PROGRAM. OPEN BREWING MECH. CQube Touchscreen
Rotate brewing mechanism without water and ingredients: Used with advantage when
the brewing mechanism has been removed for washing and will be reinstalled.
1. Insert the card in the card reader (B).
The display shows Service Menu, Clean Machine.
2. Press the Clean Machine button.
3. Step through the menu to Select Cleaning, Rinse Brewer.
NOTE! Place a container holding 150 ml under the Coffee tap
4. Press the Enter button.
The display shows Rinse Brewer. The machine now rinses the brewing mechanism.
5. Remove the card
20.
9. CLEANING PROGRAM. RINSE BREWING MECH. CQube Touchscreen
Rinsing the brewing mechanism with water. (Recommended every day).
Page is loading ...
Page is loading ...
Page is loading ...
/