DVP 5160
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User Manual
Quick Start Guide
SCART IN
SCART IN
AUDIO OUT
DIGITAL
OUT
VIDEO OUT
COAXIAL
COMPONENT VIDEO OUT
1
Connect
A Use the SCART cable (not supplied) to connect the
SCART socket (TV OUT) on the rear panel of the
DVD player and the SCART input socket at the rear
of the TV.
B Plug in the power cable from the DVD player to an
AC power outlet.
Note See the accompanying user
manual for other possible connections
(e.g. Component Video).
Basic Connection
A
SCART connection to TV
To SCART In
socket on the
TV
Television (rear)
From TV Out
socket on the
DVD Player
DVD Player (rear)
1_dvd5160_qsg_12_eng2.indd 11_dvd5160_qsg_12_eng2.indd 1 2007-04-02 10:20:26 AM2007-04-02 10:20:26 AM
3
Enjoy
Need help?
User Manual
For more product information refer to the user manual of the DVD player
Online
Go to www.philips.com/welcome
2
Set up
A
Start playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1) Press S T W X to scroll through the options
available in the DVD menu.
2) Press PLAY/PAUSE u on the option you
want to start playback
B Press PLAY/PAUSE
u
to
start playback.
C To stop playback, press
STOP Ç.
D Press DISC MENU to go
back to the disc menu
anytime.
Troubleshooting
For more troubleshooting tips, see the user
manual.
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the front of the DVD
player to turn on the power.
No picture
• Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
• Adjust the volume
• Check audio connections are in the correct input
source.
Remote control does not work
• Check the batteries are loaded correctly or replace the
batteries with new ones.
• Reduce the distance between the remote control and
the DVD player.
• Point the remote control directly toward the IR
sensor.
2005 C Koninklijke Philips N.V.
All rights reserved.
www.philips.com
SL/0711/12_14_RC2
A
Finding the viewing channel
A Press 2 on the DVD player’s remote control.
B Switch on the TV.
• The DVD background appears on the TV screen.
C Press ‘0’ on the TV’s remote control, then repeatedly
press the Channel Down button until you see the
DVD background screen. This is the correct viewing
channel for the DVD player.
Note For some TVs, to nd the correct viewing
channel, you can keep pressing the AV or SELECT
buttons, If still unable to nd the correct viewing
channel, check the connections again or check your
TV’s user manual.
B
Language preference setup
Use the DVD player’s remote control
to select the
desired On-screen language, Audio language, Subtitle
language and Menu language
you preferred.
Selecting On-screen language
A
Press SETUP on the DVD player’s remote control.
B Press
T
to highlight {OSD Language}, then press X.
Disc Lock
OSD Language English
Sleep French
DivX(r) VOD Code
Spanish
German
Italian
General Setup Page
C Press S
T
to select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc
languages.
1_dvd5160_qsg_12_eng2.indd 21_dvd5160_qsg_12_eng2.indd 2 2007-04-02 10:20:28 AM2007-04-02 10:20:28 AM
-
1
-
2
Philips DVP5160/12 User manual
- Category
- DVD players
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Philips DVP3120/12 User manual
-
Philips DVP3142/12 User manual
-
Philips DVP5960/12 Quick start guide
-
-
-
Philips DVP5980/12 User manual
-
Philips DVP5140/12 Quick start guide
-
-
-
Philips DVDR3440H User manual