Sony LBT-XGV80 Operating instructions

4-245-989-11(2)

Component

Hi-Fi Stereo

System

Operating Instructions

LBT-XGV80

LBT-XGV50

2

GB

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

This appliance is

classified as a CLASS 1

LASER product.

This label is located on

the rear exterior.

The following caution label is located inside the

apparatus.

Don’t throw away the battery with

general house waste, dispose of it

correctly as chemical waste.

ENERGY STAR

®

ENERGY STAR

®

is a U.S.

registered mark. As an E

NERGY

S

TAR

®

partner, Sony Corporation

has determined that this product

meets the E

NERGY STAR

®

guidelines for energy efficiency.

WARNING

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

3

GB

How to use this manual...........................5

Playable discs..........................................5

Getting Started

Hooking up the system............................7

Setting the clock....................................10

VIDEO CD/CD/MP3 – Play

Loading a disc.......................................11

Playing a disc........................................11

— Normal Play/Shuffle Play

Playing VIDEO CDs with PBC functions

(Ver. 2.0).........................................14

— PBC Play

Playing repeatedly.................................15

— Repeat Play

Creating your own program..................15

— Program Play

Locating a specific part of

a VIDEO CD ..................................16

— Time Search/Disc Digest

Tuner

Presetting radio stations........................18

Listening to the radio............................19

— Preset Tuning

— Manual Tuning

Tape – Play

Loading a tape.......................................21

Playing a tape........................................21

Tape – Recording

Recording your favorite CD tracks on a

tape..................................................22

— CD Synchro Recording

Recording on a tape manually...............23

— Manual Recording

Sound Adjustment

Adjusting the sound.............................. 24

Making a personal audio emphasis

file................................................... 25

— Personal File

Selecting the audio emphasis effect...... 25

Selecting the surround effect................26

Enhancing video game sound...............26

— Game Sync

(LBT-XGV80 only)

Mixing video game sound with other

sound source................................... 26

— Game Mixing

(LBT-XGV80 only)

Singing along........................................ 27

(LBT-XGV80 only)

Timer

Falling asleep to music......................... 29

— Sleep Timer

Waking up to music.............................. 29

— Daily Timer

Timer recording radio programs........... 30

Display

Turning off the display......................... 31

— Power Saving Mode

Viewing information about the disc in the

display ............................................ 32

Changing the Power illuminator........... 33

(LBT-XGV80 only)

Changing the spectrum analyzer

display ............................................ 33

(LBT-XGV50 only)

Viewing information about the disc in the

on-screen display............................ 33

Table of Contents

continued

4

GB

Optional Components

Hooking up optional components.........35

Listening to audio from a connected

component ......................................36

Recording audio from a connected

component ......................................37

Recording on a connected

component ......................................37

Troubleshooting

Problems and remedies.........................38

Messages...............................................41

Additional Information

Precautions............................................42

Specifications........................................43

Glossary ................................................45

List of button locations and reference

pages...............................................47

5

GB

• This manual mainly explains operations using

the system, but the same operations can also

be performed using the buttons on the remote

having the same or similar names.

• The following symbols are used in this

manual.

You can play back the following discs on this

system. Other discs cannot be played back.

List of playable discs

Discs that this system cannot

play

•CD-ROMs

• CD-Rs/CD-RWs other than those recorded in

the following formats:

– music CD format

– MP3 format that conforms to ISO9660

Level 1/Level 2 or Joliet*

• A disc that has a non-standard shape (e.g.,

card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive, cellophane tape,

or a sticker still left on it.

* Up to 30 characters can be displayed.

How to use this manual

Symbol Meaning

Functions that can be used with

VIDEO CDs

Functions that can be used with

audio CDs

Functions that can be used with

MP3

Playable discs

Format of

discs

Disc logo Contents

VIDEO CDs Audio +

Video

Audio CDs Audio

CD-R/CD-RW

(audio data)

Audio

CD-R/CD-RW

(MP3 files)

Audio

continued

6

GB

Notes on CD-R and CD-RW

• This system can play CD-R/CD-RW discs

edited by the user. However, note that

playback of some discs may not be possible

depending on the recording device used for

recording or the disc condition.

• Discs recorded on CD-R/CD-RW drives may

not be played back because of scratches, dirt,

recording condition or the driver’s

characteristics.

• CD-R and CD-RW discs that have not been

finalized (processing to allow play by a

normal CD player) cannot be played.

• CD-R and CD-RW discs recorded in multi-

session mode are not supported.

• The system may be unable to play MP3

format files that do not have the extender

“.MP3”.

• Attempting to play non-MP3 format files that

have the extender “.MP3” may result in noise

or malfunction.

• With formats other than ISO9660 level 1 and

2, folder names or file names may not be

displayed correctly.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree

structure.

– a disc to which data can be added (non-

finalized disc).

Note on playback operations

of VIDEO CDs

Some playback operations of VIDEO CDs may

be intentionally set by software producers. Since

this system plays VIDEO CDs according to the

disc contents the software producers designed,

some playback features may not be available.

Also, refer to the instructions supplied with the

VIDEO CDs.

Music discs encoded with

copyright protection

technologies

This product is designed to playback discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection technologies are marketed

by some record companies. Please be aware that

among those discs, there are some that do not

conform to the CD standard and may not be

playable by this product.

Getting Started

7

GB

Perform the following procedures 1 to 7 to hook up your system using the supplied cords and

accessories (page 45).

1 Connect the speakers.

Connect the speaker cords to the FRONT

SPEAKER jacks for LBT-XGV50 or

TWEETER & WOOFER jacks for

LBT-XGV80 as shown below.

2 Connect the speakers for

biamplification system. (LBT-XGV80

only)

Connect the speaker cords to the SUPER

WOOFER jacks as shown below.

Getting Started

Hooking up the system

AM loop antenna

Speaker (right) Speaker (left)

FM lead antenna

Black (#)

Red (3)

Insert only the stripped portion

Black (#)

Gray (3)

Insert only the stripped portion

continued

8

GB

3 Connect the FM and AM antennas.

Set up the AM loop antenna, then connect

it.

Note

Keep the antennas away from the speaker cords.

4 Connect the video input jack of your TV

to the VIDEO OUT jack with the

supplied video cord.

When using a TV

Turn on the TV and select the video input so you can

view the pictures from this system.

5 For models with a voltage selector, set

VOLTAGE SELECTOR to the local

power line voltage.

Refer to the print on your system’s

VOLTAGE SELECTOR for available

settings.

6 Connect the power cord to a wall

outlet.

The demonstration appears in the display.

When you press ?/1, the system turns on

and the demonstration automatically ends.

If the plug does not fit the wall socket,

detach the supplied plug adaptor (only for

models equipped with an adaptor).

You can cancel the demonstration by

pressing DISPLAY repeatedly (page 31).

7 Set the color system to PAL or NTSC

depending on the color system of your

TV while the power is off.

The color system is factory set to NTSC for

Latin American models, and AUTO for

other models.

Notes

• You cannot set the color system in Power Saving

Mode (page 31).

• When you play back a VIDEO CD recorded in a

different color system from the one you set to the

unit, the picture image may be distorted.

AM

FM

75

C

O

A

X

IA

L

Extend the FM lead

antenna horizontally

AM loop antenna

VOLTAGE SELECTOR

120V

220V

230

~

240V

The color system

of your TV

Do this

NTSC Press ?/1 while holding

down MOVIE. The system

is set to NTSC.

PAL Press ?/1 while holding

down REGGAE. The

system is set to PAL.

AUTO Press ?/1 while holding

down TANGO. If your TV

automatically changes the

color system according to

the input signal, the system

is set to AUTO.

Getting Started

9

GB

Inserting two R6 (size AA)

batteries into the remote

Note

If you do not use the remote for a long period of time,

remove the batteries to avoid possible damage from

battery leakage and corrosion.

Tip

When the remote no longer operates the system,

replace both batteries with new ones.

Using the remote

You can use the buttons shown below to operate

a Sony TV.

Attaching the speaker pads

Attach the supplied speaker pads to the bottom

of the speakers to stabilize the speakers and

prevent them from slipping.

To Do this

Turn the TV on or

off

Press TV ?/1.

Switch the TV’s

video input

Press TV/VIDEO.

Change the TV

channels

Press TV CH + or –.

Adjust the volume

of the TV speaker(s)

Press TV VOL + or –.

When carrying this system

Perform the following procedure to protect

the CD mechanism.

1 Make sure that all discs are removed

from the system.

2 Press FUNCTION (or FUNCTION + or –

on the remote) repeatedly until “CD”

appears.

3 Hold down EDIT, then press ?/1 until

“LOCK” appears.

4 Unplug the power cord.

10

GB

1 Press ?/1 to turn on the system.

2 Press c/CLOCK SET (or CLOCK/

TIMER SET on the remote).

3 Press M/m repeatedly to set the hour.

4 Press ENTER.

5 Press M/m repeatedly to set the

minute.

6 Press ENTER.

The clock starts working.

To adjust the clock

1 Press c/CLOCK SET (or CLOCK/TIMER

SET on the remote).

2 Press M/m to select “CLOCK SET”, then

press ENTER.

3 Do the same procedures as step 3 to 6

above.

Notes

• The clock settings are canceled when you disconnect

the power cord or if a power failure occurs.

• You cannot set the clock in Power Saving Mode

(page 31).

Setting the clock

VIDEO CD/CD/MP3 – Play

11

GB

1 Press PUSH OPEN at left side of the

front cover.

The front cover opens.

2 Place a disc with the label side up on

the disc tray.

To insert additional discs, press DISC SKIP

to rotate the disc tray.

3 Close the front cover.

Note

Do not use a disc with tape, seals or paste on it as this

may cause malfunction.

This system lets you play VIDEO CDs*, audio

CDs and discs with MP3 audio tracks.

Before playing a VIDEO CD, turn on your TV

and select the video input. Refer to the operating

instructions supplied with your TV if you need

help.

* You can play both VIDEO CDs without PBC

functions (Ver. 1.1) and VIDEO CDs with PBC

functions (Ver. 2.0).

Example: When a disc is loaded

1 Press FUNCTION (or FUNCTION + or –

on the remote) repeatedly until “CD”

appears.

VIDEO CD/CD/MP3 – Play

Loading a disc

Playing a disc

— Normal Play/Shuffle Play

Total track number Total playing time

Disc number in the playing position

continued

12

GB

2 Press PLAY MODE in stop mode

repeatedly until the mode you want

appears.

* Depending on VIDEO CDs with PBC function

(Ver. 2.0), the disc does not change.

3 Press NX (or CD N on the remote).

Other operations

*1

For VIDEO CDs, there are may be some

disturbance in the video image.

*2

Only when setting the PBC function to off or when

playing VIDEO CDs without PBC functions

(Ver. 1.1).

*3

For discs with MP3 audio tracks, you cannot search

between multiple tracks.

Also, the time may not be displayed correctly for

some tracks.

Select To play

ALL DISCS*

(Normal Play)

All discs in the disc tray

continuously.

1DISC

(Normal Play)

The tracks on the disc you

have selected in original

order.

ALBUM

(Normal Play)

All MP3 audio tracks in the

album on the disc you have

selected in original order.

When playing a non-MP3

disc, Album Play performs

the same operation as 1DISC

Play.

ALL DISCS

SHUFFLE

(Shuffle Play)

The tracks on all discs in

random order.

1DISC

SHUFFLE

(Shuffle Play)

The tracks on the disc you

have selected in random

order.

ALBUM

SHUFFLE

(Shuffle Play)

The MP3 audio tracks in the

album on the disc you have

selected in random order.

When playing a non-MP3

disc, Album Shuffle Play

performs the same operation

as 1DISC SHUFFLE Play.

PROGRAM

(Program Play)

The tracks on all discs in the

order you want them to be

played (see “Creating your

own program” on page 15).

To Do this

Stop play Press x.

Pause Press NX (or X on the

remote)

*1

. Press again to resume

play.

Select a track or

scene

*2

Press . or > (or PREV or

NEXT on the remote for VIDEO

CD) repeatedly during play or

pause.

Select an album of

MP3

Press ALBUM + or – repeatedly

after step 2.

Find a point in a

track or scene

*3

(Lock Search

Function)

Press m or M during

playback. At the desired point,

press NX (or CD N on the

remote) to stop searching and

start playback.

For VIDEO CDs only, each time

you press the button, speed

changes cyclically as follows:

1 (slow)

t 2 (normal) t

3 (high)

Select a disc Press DISC 1 – 5 or DISC SKIP.

Switch to CD

function from

another source

Press DISC 1 – 5 or NX (or

CD N on the remote)

(Automatic Source Selection).

Remove a disc Press PUSH OPEN, then press

DISC SKIP until the disc comes

to the front.

Adjust the volume Turn VOLUME (or press

VOL + or – on the remote).

VIDEO CD/CD/MP3 – Play

13

GB

Notes

• You cannot change the play mode during playback.

• Some time may be needed to start playback of discs

recorded in complex configurations such as many

layers.

• When the disc is inserted, the player reads all the

tracks on that disc. If there are many albums or non-

MP3 audio tracks on the disc, it may take a long time

for play to begin or for the next MP3 audio track to

start play.

• Do not save unnecessary albums or tracks other than

MP3 ones in the disc to be used for MP3 listening.

We recommend that you do not save other types of

tracks or unnecessary albums on a disc that has MP3

audio tracks.

• An album that does not include an MP3 audio track

is skipped.

• Maximum album number: 256 (including root

albums)

• Up to 512 tracks and albums of MP3 on a single disc

can be recognized on this unit.

• MP3 audio tracks are played back in the order that

they are recorded on the disc.

• Depending on the encoding/writing software,

recording device, or the recording media used at the

time an MP3 audio track is recorded, you may

encounter such problems as disabled playback,

sound interruptions, and noise.

Tip

When switching to CD function from tuner, a longer

time may be required to access the disc. In this case, set

“CD POWER ON” by CD power manage function

(page 19).

To play a track by entering the

track number

You can also select the track you want using the

remote during Normal Play.

Press the number button(s) on the remote.

To enter a track number over 10

1 Press >10.

2 Enter the corresponding digits for the same

number of “–” flashing in the display.

To enter 0, press 10/0.

Example:

To enter track number 30, press >10, then press 3 and

10/0.

Resuming playback from the

point you stopped the disc

— Resume Play

This system memorizes the point where you

stopped the VIDEO CD so you can resume from

that point.

Resume Play is not available for an audio CD

and a disc with MP3 audio tracks.

1 While playing a VIDEO CD, press x to

stop playback.

“RESUME” appears on your TV screen. If

“RESUME” does not appear, Resume Play

is not available.

2 Press NX (or CD N on the remote).

The player starts playback from the point

you stopped the VIDEO CD in step 1.

Notes

• You cannot perform Resume Play during Disc

Digest, Shuffle Play or Program Play.

• Depending on where you stopped the VIDEO CD,

the system may resume playback from a different

point.

• Resume play is canceled when:

– you press the number buttons, PLAY MODE, x,

DISC SKIP or ./>.

– you disconnect the power cord.

– you turn off the system.

– you switch the function to tuner when “CD

POWER OFF” is selected (page 19).

Tip

To view from the beginning of the VIDEO CD, press

x in stop mode, then press NX (or CD N on the

remote).

14

GB

You can use PBC* menus on your TV screen to

enjoy the disc’s interactive software. The menu

format and structure may differ depending on

each disc.

* PBC: Playback Control

1 Press FUNCTION (or FUNCTION + or –

on the remote) repeatedly until “CD”

appears.

2 Press NX (or CD N on the remote) to

start playing a VIDEO CD with PBC

functions (Ver. 2.0).

The PBC menu appears on the TV screen.

3 Press . or > repeatedly to select

the item number you want, then press

SELECT on the remote (or press the

number button(s) on the remote).

4 Continue playback according to the

instructions on the menus to enjoy

interactive playback.

Refer to the operating instructions supplied

with the disc, as the operating procedure

may differ according to the VIDEO CD.

Other operations

To cancel playback with PBC

functions (Ver. 2.0)

1 In stop mode, press . or > to select a

track.

2 Press NX (or CD N on the remote).

The “PBC OFF” indicator lights up and

playback starts from the selected track. Still

images, such as the menu screens, will not

be shown.

To return to PBC playback, press x in stop

mode, then press NX (or CD N on the

remote).

Tips

• When “ ” appears on the TV screen, you have

pressed an invalid button.

• When you press NEXT on the remote during menu

playback or while playing moving pictures, the next

scene on the disc appears. Also refer to the

instructions supplied with the disc.

• You can cancel playback with PBC functions

(Ver. 2.0) by just pressing the number button(s) on

the remote in stop mode.

Playing VIDEO CDs with

PBC functions (Ver. 2.0)

— PBC Play

To Do this

Stop play Press x.

Go to the next menu

page or scene

Press NEXT on the remote.

Go back to the

previous menu page

or scene

Press PREV on the remote.

Go back to the

previous menu

Press RETURN O on the

remote.

Enter a track number

over 10

See “To play a track by

entering the track number”

(page 13).

VIDEO CD/CD/MP3 – Play

15

GB

You can play all the tracks or a single track on a

disc repeatedly.

Press REPEAT during playback until

“REPEAT” or “REPEAT1” appears.

REPEAT: For all the tracks on the disc, or all the

tracks in the album up to five times.

REPEAT1: For a single track only.

To cancel Repeat Play

Press REPEAT repeatedly until both

“REPEAT” and “REPEAT1” disappear.

Notes

• You cannot select “REPEAT” and “ALL DISCS

SHUFFLE” at the same time.

• You cannot select “REPEAT1” during playback of

VIDEO CDs with PBC functions (Ver. 2.0).

You can make a program of up to 25 steps from

all the discs in the order you want to play them.

You can synchro record the programmed tracks

onto a cassette tape (page 22).

1 Press FUNCTION (or FUNCTION + or –

on the remote) repeatedly until “CD”

appears, then load a disc.

2 Press PLAY MODE in stop mode

repeatedly until “PROGRAM” appears.

3 Press one of DISC 1 – 5 or DISC SKIP to

select a disc.

4 Press . or > repeatedly until the

desired track number appears.

When programming an MP3, press

ALBUM + or – to select album, then press

. or > repeatedly until the desired

track number appears.

5 Press PLAY MODE once.

The track is programmed.

First the programmed playing order and

“STEP” appear, then the total playing time

appears.

Playing repeatedly

— Repeat Play

Creating your own

program

—Program Play

PROGRAM

Selected track

number

Total playing time

(including

selected track)

Disc number in the playing position

continued

16

GB

6 Program additional discs or tracks.

7 Press NX (or CD N on the remote).

Program Play starts.

Other operations

Tips

• The program you made remains after Program Play

finishes. To play the same program again, press

NX (or CD N on the remote).

• “– –.– –” appears when the total VIDEO CD/CD

program time exceeds 100 minutes, when you select

a VIDEO CD/CD track whose number is 21 or over,

or when you select an MP3 audio track.

The TV screen must be ON to use these

functions.

Use the remote for the operation.

Locating by elapsed time from

the beginning of the disc

— Time Search

1 Press SPECIAL MENU in stop mode.

2 Press 1 to select “1) TIME SEARCH”.

3 Press the number buttons (1 – 10/0) to

enter the time (in minutes) for the

section you want.

To enter 10 minutes: Press 1 and 10/0.

The selected elapsed time appears on the

TV screen.

To reenter the time: Press CLEAR, then

press the number buttons again.

4 Press SELECT.

Playback starts from the selected time.

To program Repeat steps

Other tracks on the

same disc

4 and 5

Other tracks on

other discs

3 to 5

To Do this

Cancel Program

Play

Press PLAY MODE in stop

mode repeatedly until

“PROGRAM”, “ALL DISCS

SHUFFLE” or “1DISC

SHUFFLE” disappears.

Clear a track from

the end

Press CLEAR on the remote in

stop mode.

Add a track to the

end of the program

in stop mode

Perform steps 3 to 5.

Locating a specific part of

a VIDEO CD

— Time Search/Disc Digest

VIDEO CD/CD/MP3 – Play

17

GB

Locating the desired track

—Disc Digest

You can select the track you want by viewing

the first frame of each track. 9 different tracks

can be displayed on the TV screen at one time.

1 Press SPECIAL MENU in stop mode.

2 Press 2 to select “2) DISC DIGEST”.

The first frame of tracks 1 through 9 on the

current disc are displayed.

3 Press the number buttons (1 – 9) to

select the track you want.

To display the next 9 tracks

Press NEXT. The first frame of tracks 10

through 18 are displayed.

When there are more tracks in the disc, “>”

appears in the upper right corner of the TV

screen.

To display previous tracks, press PREV.

Note

If you press SPECIAL MENU to active Time Search or

Disc Digest in Program or Shuffle Play mode, it

changes to Normal Play mode.

18

GB

You can preset up to 20 FM stations and 10 AM

stations. You can then tune in any of those

stations simply by selecting the corresponding

preset number.

Automatic tuning preset

You can automatically tune in all of the stations

that can be received in your area and then store

the radio frequency of the desired stations.

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“AUTO” appears.

3 Press TUNING +/–.

The frequency changes as the system scans

for a station. Scanning stops automatically

when a station is tuned in. At that time,

“TUNED” and “STEREO” (for an FM

stereo program) appear.

If “TUNED” does not appear and the

scanning does not stop

Set the frequency of the desired radio

station as described in steps 2 and 3 of

“Manual tuning preset”.

4 Press MEMORY.

The preset number flashes. Perform steps 5

and 6 while the preset number flashes.

5 Press TUNING +/– repeatedly to select

the desired preset number.

6 Press TUNER ENTER.

“COMPLETE” appears.

7 Repeat steps 1 through 6 to store other

stations.

Manual tuning preset

You can manually tune in and store the radio

frequency of the desired stations.

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“MANUAL” appears.

3 Press TUNING +/– repeatedly to tune in

the desired station.

4 Press MEMORY.

The preset number flashes. Perform steps 5

and 6 while the preset number flashes.

5 Press TUNING +/– repeatedly to select

the desired preset number.

6 Press TUNER ENTER.

“COMPLETE” appears.

7 Repeat steps 1 through 6 to store other

stations.

Other operations

Tuner

Presetting radio stations

Preset number

To Do this

Tune in a station

with a weak signal

Follow the procedure described

in “Manual tuning preset”.

Stop scanning Press TUNING MODE.

Change the preset

number

Start over from step 1.

Change the preset

station

Start over from step 1.

Cancel presetting Press MEMORY.

Tuner

19

GB

To improve tuner reception

When tuner reception is poor, set CD player

power off by CD power manage function.

CD power is factory set to on.

1 Press FUNCTION (or FUNCTION + or – on

the remote) repeatedly until “CD” appears.

2 Press ?/1 to turn off the system.

3 Press ?/1 while holding x.

“CD POWER OFF” appears.

To set CD power on

Repeat the procedure above and “CD POWER

ON” appears.

Notes

• When “CD POWER OFF” is selected, disc access

time is increased.

• You cannot change the setting in Power Saving

Mode (page 31).

To change the AM tuning interval

The AM tuning interval is factory-preset to

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first,

then turn off the system. While holding TUNER

ENTER, press ?/1 to turn the system back on.

When you change the interval, all the AM preset

stations are erased. To reset the interval, repeat

the same procedure.

Note

You cannot change the AM tuning interval in Power

Saving Mode (page 31).

Tips

• The preset stations are retained for half a day even if

you disconnect the power cord or if a power failure

occurs.

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 18).

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“PRESET” appears.

3 Press TUNING +/– (or PRESET +/– on

the remote) repeatedly to select the

desired preset station.

To select the desired preset

number using the number buttons

on the remote

Press number buttons on the remote instead of

performing step 3. To enter preset number 10 or

higher, press >10 and the corresponding number

buttons. To enter 0, press 10/0.

Listening to the radio

continued

20

GB

Listening to non-preset radio

station

— Manual Tuning

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“MANUAL” appears.

3 Press TUNING +/– repeatedly to tune in

the desired station.

Note

When switching to CD function from tuner, a longer

time may be required to access the disc. In this case, set

“CD POWER ON” by CD power manage function

(page 19).

Tips

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

• When an FM stereo program has static noise, press

FM MODE repeatedly until “MONO” appears.

There will be no stereo effect, but the reception will

improve.

• Press TUNING MODE repeatedly until “AUTO”

appears in step 2 above, then press TUNING +/–.

The frequency indication changes and scanning stops

when the system tunes in a station (Automatic

Tuning).

• To record the radio programs, use manual recording

(page 23).

Page is loading ...

Sony LBT-XGV80 Operating instructions

This manual is also suitable for

Sony LBT-XGV80 Operating instructions

Related papers

Other documents