Danfoss Manifold Installation guide

Hello! I am an AI chatbot trained to assist you with the Danfoss Manifold Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Manifold

With 10 x EVUB 3 NC (Normally Closed)

Max. opening diﬀerential pressure MOPD: Coil dependent

Max. working pressure: 45,2 bar g / 655 psi g

Max. temperature of medium: −40°C to +105°C / −40°F to +220°F

Ambient temperature : −40°C to +60°C / −40°F to +140°F

©Danfoss A/S (AC-AKC / frz), 01-2010 DKRCC.PI.BDO.B1.02-520H4074

032R9550

Instructions

Be sure that the

O-ring is in place

Use 2 screws M4x25 TX 20

from plastic bag

Tightening torque: 4 Nm

Be sure there are 2 O-rings

placed in the valve before

mounting on manifold

Remove red sealing paper

before mounting the valve

Tightening torque:

Fittings G ⅛” : 20 Nm

Flare ¼” : 20 Nm