3 Brightness Modes • Soothing LED Light • Eye Safe Light
Touch Control Kids Table and Night LED Lamp
Snorky
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27 28 29
30 31 32 33 34
36 37 38
35
2
39 40
4142 43
44 45 46 47 48 49
50 51 52
Introduction
This LED table light can illuminate any dark space in your home and give a sense of security to your
child. The light emitted via the LED bulbs protect your childs eyes as the blue light emitted is reduced.
Safety tested and tamper-proof to protect little fingers. Easy to dim by pressing the button, so that your
child gets the perfect light for arts and crafts, reading or relaxing.
Packaging Contents:
• Melman
• Power Adapter
• User Guide
Specification:
• Input: 5V, 350mA
• LED Brightness: 350lumens
• Power: 6W
Features:
• Soothing light: The controllable light is perfect to create the best soothing and relaxing ambience.
• Touch Sensor: Touch or tap to increase or decrease the brightness level of the lamp.
• Ultra-Bright LED: Melman features a 350 Lumen LED light with over 50hours of usage time
(in low light mode)
• 2-in-1 Design: Combined desk lamp with night light together, two lights can work simultaneously and
separately
• Touch Brightness Control: Sensitive touch controls let you control the brightness and contrast of the
LED light
• Eco-Friendly: Eco-friendly low power consumption designed for longer LED lifespan
English
1
3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27 28 29
30 31 32 33 34
36 37 38
35
2
39 40
4142 43
44 45 46 47 48 49
50 51 52
Precautions:
Please read all safety instructions and warnings thoroughly before using this product. Improper
use of this product may result in damage to this or attached products.
1. Do not disassemble the device or attempt to fix it.
2. Do not attempt to replace any part of this product.
3. Do not crush, puncture or dispose of in fire.
4. Do not store or use the device in a high temperature environment, including intense sunlight
or heat.
5. Avoid excessive drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is internal damage to the device, discontinue using
immediately.
7. If you find that the device is too hot, is emitting an odor, or is deformed, punctured or exhibits
any suspicious or abnormal behavior, discontinue use immediately and contact our customer
service.
English
1 3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27 28 29
30 31 32 33 34
36 37 38
35
2
39 40
4142 43
44 45 46 47 48 49
50 51 52
Appearance & Interface Description
1. Power Switch
2. Brightness control
sage Instructions
1. Plug the LED Light into the Power Socket
2. Press the Power Button once to turn on the LED light
3. Press again to control the contrast
4. Press and hold the Power Button to turn off the LED light
5. Press the brightness control switch as required to control the brightness
6. Press and hold the Brightness control switch to turn on the night light function
7. Press and hold the Brightness control switch again to turn off the night light function
1
2
English
1
3 4 5
6 7 8 9 10 11
12 13 14 15 16 17
18 19 20 21 22 23
24 25 26 27 28 29
30 31 32 33 34
36 37 38
35
2
39 40
4142 43
44 45 46 47 48 49
50 51 52
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/