日 期
签 字
底 图 总 号
描 图
旧底图总号
描 校
借（通）用件登记
共 1 张
图 样 标 记
更改文件号
工 艺
审 核
校 对
设 计
标记 处数
日 期
批 准
日 期
标 准 化
签 名
比 例
第 1 张
重 量
1:1
英文版说明书
8XZ.867.851
8XZ.867.851
2020-11-06
楼雁雁
技术要求
1 文字、图案单印灰60%K印刷（具体按客户样稿印刷）
2 说明书为双面印刷，要求文字内容等印刷清楚、整齐，
不允许有歪斜重影等现象。
3 根据要求,在单个彩盒内放置说明书一张。
4 说明书折叠方式及要求需符合风琴三折页
说明书折叠步骤示意图：
说明书 风琴式三折 完成
铜版纸105g
55
55
杭州鸿世电器有限公司
杭州希智电子有限公司
W-BG001
无线智能网关
（中性版）
55x55
Product Manual
Wireless Smart Gateway
W-BG001
Product Manual
Product Introduction Preparation for Use Network Access Setting
Product SpecificationIndicator status
Intelligent gateway is the control center of Bluetooth
equipment,Users can add devices and reset ,third-party
control and Bluetooth group control to meet the requirements
of smart home and other applications etc.
Connect the device to the power supply and make sure
that the phone is connected to a 2.4GHz Wi-Fi network,
turn on bluetooth
Search for “Smart life” in the App store or scan the QR
code on the outer package or in the manual to download
and install the App.
After logging in, follow the instructions to create a family.
Confirm that the network configuration light (red light) blinks
(if the network configuration light is in another state, press
the reset button for 5 or 6 seconds and wait for the red light
blinks); Follow the App instructions to add device
Open “My family” page in “Smart life” App, click “+” button in
the top right corner;
Select “Wireless gateway (Bluetooth)” under “Add Manually”
When added, the device can be found on the “My family”
list.
Wi-Fi configuration indicator
Bluetooth
configuration indicator
on/off reset button
Power outlet
Wireless Smart Gateway
Product name
Product model
Power input
Operating temperature
Operating humidity
Power supply
Wireless technology
Wireless Smart Gateway
1A
-10 -55
10%-90%RH(Non-condensing)
Micro USB DC5A
Wi-Fi 802.11 b/g/n
Bluetooth
Packing List
Wireless Smart Gateway x1 Data Cable x1
Product Manual x1
3
Blue light
(Bluetooth)
Red light(WIFI) Gateway status Remark
Power-on start
of the equipment
two lights briefly on and
then off, and the device
reboots and enters the
distribution network state
(default EZ pattern)
Constant light
Constant light
Long out
Flash
Flash 250mm/times
Slow flash
1500mm/times
Constant light
Constant light Add sub device
Connected
successfully and
working properly
EZ pattern
AP pattern
W-BG001
Product Manual
Product SpecificationIndicator status
Wireless Smart Gateway
Product name
Product model
Power input
Operating temperature
Operating humidity
Power supply
Wireless technology
Wireless Smart Gateway
1A
-10 -55
10%-90%RH(Non-condensing)
Micro USB DC5A
Wi-Fi 802.11 b/g/n
Bluetooth
Packing List
Wireless Smart Gateway x1 Data Cable x1
Product Manual x1
Blue light
(Bluetooth)
Red light(WIFI) Gateway status Remark
Power-on start
of the equipment
two lights briefly on and
then off, and the device
reboots and enters the
distribution network state
(default EZ mode)
Constant light
Constant light
Long out
Flash
Flash 250mm/times
Slow flash
1500mm/times
Constant light
Constant light Add sub device
Connected
successfully and
working properly
EZ pattern
AP pattern
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
To comply with FCC RF exposure compliance requirements, this grant is
applicable to only mobile configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
1
2
China Electronics Shenzhen F400 User manual
Dascom DP-541 User guide
Printek Interceptor 820 Series Mobile Thermal PrinterInterceptor 80 Series Mobile Thermal Printer User manual
Printekmobile FieldPro FP530si Series Mobile Thermal Printer User manual
Dascom DP-530 User guide
Zebra ZT600 User guide
Zebra ZT411/ZT421 User guide
