4
Suddenlink is a registered trademark of Suddenlink Communications, a subsidiary of Altice USA, Inc. © 2020 Suddenlink Communications. COL0121SDL1672
Suddenlink TG1672 Gateway
Disconnect everything from
your existing equipment.
Connect the open end of your
coaxial cable to the back of the
new Gateway.
Plug the Gateway power cord
into the back of the device.
Plug the other end of the power
cord into an electrical outlet.
1 2 3
These instructions will guide you through installing or replacing a Suddenlink Gateway
Once you’ve connected
and powered on your new
Gateway, call 888.570.4702 to
begin the activation process.
Connect to the WiFi Network
shown on the label on the
side of your Gateway. Your
password will be listed as the
”Pre-Shared Key.”
To personalize your in-home
network name:
+ Enter 192.168.0.1 into the
address field of your browser.
+ Login as “admin” and enter
“password” in the password
field.
+ Find your network name on
the Basic Settings tab and save
your changes.
To connect to the Internet, go
to WiFi settings on your device.
Select your in-home WiFi
network name from the list
and when prompted, enter
your password.
Repeat this step for all of your
connected devices.
The Gateway is ready for the
next step when the top 3 lights
on the front panel are solid
blue. This may take a few
minutes.
6 75 8
Make sure to return your old equipment. Learn how at suddenlink.com/returns
Rather use your own WiFi router? Connect to
your network as shown in Step 7, then visit
suddenlink.com/usemyrouter for details.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Altice suddenlink One Quick start guide
-
Pace TiVo Mi3 Installation guide
-
TiVo Premiere Quick Manual
-
Altice suddenlink TiVo Stream Installation & Setup
-
Motorola MG7700 Quick start guide
-
-
-
TiVo Roamio I PRO Installation guide
-
Toshiba 55VX700U Owner's manual
-
