TiVo Roamio I PRO Installation guide

Brand: TiVo

Model: Roamio I PRO

Type: Installation guide

TiVo

Installation Guide

2014

Contents

Before You Start the Installation

Evaluate the Installation 4

Install Checklist 5

Guided Setup

Get Started 7

Networking 8

CableCARD 9

Switched Digital Video 10

Antenna 11

TiVo App 11

Whole Home Setup

TiVo Mini 12

Whole Home Conﬁgurations 13

Accessories

TiVo Mini 14

TiVo Stream 14

Slide Pro Remote 16

DVR Expander 16

IP and IR Codes

TiVo Roamio Remote Control 17

Slide Pro Remote 18

Home Automation and Control 19

Appendixes

TiVo Roamio Remote 20

TiVo Roamio Inputs/Outputs 22

Glossary 23

TiVo Installation Guide

TiVo offers the world’s most advanced entertainment platform featuring industry-

leading recording capacity, the most tuners, and unparalleled access to all the best

web entertainment.

This install guide will help you through the process of designing, installing, conﬁguring

and adding accessories as you build a whole-home entertainment solution for your

customers. Whether you are installing a single room or an entire whole-home solution,

this guide will help you navigate guided setup successfully and understand the choices

being made as you progress.

TiVo has always delivered an optimized TV-viewing experience. The TiVo Roamio

series of DVRs builds on that legacy of innovation. Our most powerful and versatile

DVR ever, Roamio is a multi-source, multi-room, whole-home solution that extends

the TiVo experience beyond the home—with live and recorded shows streaming to

any location in the world.

TiVo has multiple setup options, providing ﬂexibility in wiring conﬁgurations, retroﬁt

applications or new construction. The Install Checklist on pages 4-5 will provide you

with questions to help you design a personalized whole-home solution. Having the

questionnaire ﬁlled out before you begin an installation will save valuable time.

If at any time you have questions or need technical assistance, please contact

(888) 921-8486 or email a specialist at tivodemo@tivo.com.

Before You Start the Installation

Evaluate the Installation

To complete Guided Setup you’ll need a CableCARD™ to receive cable channels and

a network connection to connect to the TiVo service and premium content providers.

Networking Options

TiVo DVRs require one of the following networking connections.

Obtaining a CableCARD

CableCARDs are available in one of two ways:

Pick up:

Customers can pick up a CableCARD from a local cable ofﬁce. Not all ofﬁces

stock CableCARDs, so installers should call ahead to verify inventory. The pick

up option is available from any cable provider that supports self-installation.

Cable company installation:

Customers may opt to have a CableCARD delivered as a part of their cable

installation order in some regions. This often happens when someone has

a new line of service installed. Visit http://www.fcc.gov/guides/cablecard-

know-your-rights to learn more.

TiVoPro Tip Some cable companies also allow the account holders to

authorize custom installers to pick up CableCARDs on their behalf. Check with

your local cable company for details.

Wireless Ethernet

MoCA

CableCARD Activation Support phone numbers can be found on page 11.

TiVo Install Checklist

1. Describe your optimum TiVo experience:

Single Room Solution 2-5 Room Solution 6-10 Room Solution

1 RM (DVR only) 2 RM (+1 Mini) 6 RM (+5 Minis)

3 RM (+2 Minis) 7 RM (+6 Minis)

4 RM (+3 Minis) 8 RM (+7 Minis)

5 RM (+4 Minis) 9 RM (+8 Minis)

10 RM (+9 Minis)

* Additional DVR required if all

rooms require live streams

2. Are you using a digital antenna or cable?

Cable Antenna (if yes, then spec 4-tuner TiVo Roamio)

3. If using cable, how much would you like to be able to record and store?

75 HD hrs / 500 SD hrs 150 HD hrs / 1,000 SD hrs 450 HD hrs / 3,000 SD hrs

TiVo Roamio

™

TiVo Roamio

™

Plus TiVo Roamio

™

Pro

4. If using a 4-tuner TiVo Roamio

™

, do you want to stream your live TV and

recorded shows away from home?

Yes (requires TiVo Stream) No

5. Do you have an Ethernet connection in every room where you’ll be

installing a DVR or TiVo Mini?

Using wireless (single DVR only) Yes (see page 13) No (see pages 13-14)

6. Which service option will you be using?

TiVo service is activated after install by visiting tivo.com/activate or by calling

TiVo at 877-367-8486.

DVR Service

$14.99/month or $12.99/month if eligible for multi-service discount

$499.99 one-time payment / $399.99 multi-service discount

TiVo Mini Service

$5.99/month

$149.99 one-time payment

Recommended Solution

Mini(s) $99.99 qty.

DVRs

Roamio™ $199.99 qty.

Roamio™ Plus $399.99 qty.

Roamio™ Pro $599.99 qty.

Hard Drive Expander 500 GB 1 TB

Stream

(required for 4-tuner Roamio) $129.99

MoCA adapter $49.99

A PDF of this checklist can be found at custom.tivo.com.

Your Service Access Information

Netﬂix

Email: Password:

Amazon Instant Video

TiVo box PIN to purchase/rent movies:

Email: Password:

Hulu Plus

Email: Password:

Pandora

Email: Password:

Spotify

Email: Password:

Have questions or need technical assistance? Contact (888) 921-8486 or email a specialist at

tivodemo@tivo.com.

Guided Setup

Get Started

Guided Setup will automatically begin when you power up the TiVo DVR. Guided

Setup allows conﬁguration of network connectivity and automatically updates the

operating system software and program guide information. You can repeat Guided

setup by going to: TiVo Central (TiVo button) > Messages & Settings > Help > Restart

or Reset System > Repeat Guided Setup.

Set up the main DVR: Review service terms, activate service (if necessary), select

your country and video output, and enter your ZIP or postal code.

NOTE: Boxes purchased from the tivo.com store always come pre-activated. If the box was

purchased at a retail store or distributor, you can activate it online at www.tivo.com/activate.

TiVoPro Tip Depending on the installation application your customer

requires, you may want to update the DVR software before you arrive at your

customer location. Simply begin Guided Setup and select “get a CableCARD

later” to complete required software downloads.

Be sure you have your Install Checklist handy with any necessary usernames

and passwords for apps your customer frequently uses.

STARTGuided Setup Overview

Welcome

Setup video

Getting

started

Zip code

TV source

Hint: Select “I’ll do this later.”

See page 11 for details on antenna

setup for the 4-tuner Roamio or

the 2-tuner Premiere.

Follow the screen ﬂow to begin

setup of the main DVR.

Cable

CableCARD

setup

Antenna

Networking

Choose a network connection to connect to the TiVo service. The screen ﬂow will

proceed as follows:

Network Conﬁguration

Begin network

setup

Ethernet

Network

connection

Name your

TiVo device

Network

connection

Network name

and password

Wireless MoCA

Ethernet

If you have already connected an Ethernet cable, the DVR will automatically default

to an Ethernet connection type. Follow the screen prompts to connect.

Wireless

A wireless conﬁguration is a convenient way to connect a TiVo Roamio to a network.

However, if you plan on adding additional rooms you will need to reconﬁgure the

network connection.

For instructions on connecting previous models to a wireless network using a TiVo

wireless N or G adapter, please visit:

N link: tivo.com/nsetup G link: tivo.com/gsetup

MoCA

If you do not have the ability to connect to a wireless network or have Ethernet available

at your installation location, a MoCA connection is required. Please see ﬁgures B and

C on pages 13-14.

Select the wireless network Enter the passphrase

Installation and Activation

If you already have a CableCARD, insert the card into the back of the DVR. If you are

waiting to pick up a CableCARD from the cable company ofﬁce, or you are not going

to use a CableCARD (Antenna or Clear QAM installs), follow the prompts to continue

without a CableCARD. When the CableCARD options screen appears, select Cable-

CARD for installers. Conﬁrm the coax is connected before you begin this process. An

active connection over coax is required to activate the card. From the CableCARD

Options menu make the following selections:

CableCARD

™

Motorola

Scientifi Atlanta

Select CableCARD Menu

Select CableCARD Pairing

Select SA CableCARD/Host ID Screen

Write down the Card Serial #, Host ID and Data ID

CARD Serial # _______- _______-_______-_______-___

Host ID _______- _______-_______-_______-___

Data ID _______-_______-_______-_____

Write down the Card Serial #, Host ID and Data ID

CARD Serial # _______- _______-_______-_______-___

Host ID _______- _______-_______-_______-___

Data ID _______-_______-_______-_____

When completed, the Cable Company will verify

that the CableCARD is paired correctly.

CableCARD Activation Support

Call your local self-service CableCARD activation support number to activate

the CableCARD.

Charter Communications 1-888-438-2427 Charter Support

Comcast/XFINITY 1-877-405-2298 CableCARD Activation Line

Cox Communications 1-877-820-8202 CableCARD Activation Line

Insight Communications 1-866-440-1024 Insight Support

Mediacom 1-866-848-7064 CableCARD/ Self-Install Activation Line

Optimum 1-866-670-0855 Optimum Support

RCN 1-888-891-7770 CableCARD/ Self-Install Activation Line

Suddenlink 1-888-822-5151 Suddenlink Support

Time Warner Cable 1-866-606-5889 CableCARD Activation Line

Verizon FiOS 1-888-897-7499 Automated Activation Line

TiVoPro Tip

Switched Digital Video

Some cable providers have not yet completed their all-digital conversion.

If your customer can connect the coax cable directly to a non-HD television

and receive a signiﬁcant number of cable network channels, the install may

require the use of an SDV (Switched Digital Video) adapter.This piece connects

to the Roamio DVR via USB and allows Roamio to request channels on a SDV

system. This device will NOT pass a MoCA signal.If this device is required and

you wish to use MoCA, you will need to use a 1 in 2 out coax splitter before the

SDV and Roamio.

CABLE SPLITTER

POWER

Antenna

Connect the HDTV antenna to the CABLE/ANT port on the back of the DVR. From

the Antenna Options menu, make the following selections:

Initial screen

Channel Scan Complete

(return to Networking, page 9)

Antenna Veriﬁcation Scan

TiVo App

A free app is available for iOS* and Android devices that provides second-screen

interaction for TiVo DVRs.

< Remote < Browse

< Search

< Manage

Whole Home Setup

TiVo

Mini

TiVo Mini is an IP-based solution and requires an active network connection for

every standard installation. TiVo Mini allows you to watch live TV or recorded shows

streamed from a compatible TiVo DVR. It also lets you access content from Hulu

Plus, YouTube™, Pandora

, Spotify

and more. The TiVo Mini requires a TiVo DVR with

at least four tuners on the same network. Before installation, the device must have

been activated on the same account as the accompanying DVR.

Connections

The network conﬁguration you chose when setting up the main DVR will determine

your network connection to TiVo Mini. Mini cannot be connected to a DVR using

a wireless connection. If you chose wireless as the initial DVR connection type, go

back and repeat guided setup on the main DVR and select Ethernet or MoCA.

Coax/MoCA

Component

A/V

HDMI

Ethernet

USB

12VDC

TiVo Roamio supports up to 11 TiVo Mini accessories. Each DVR supports 4

additional outbound HD streams simultaneously.

TiVoPro Tip To hook up the TiVo Mini with composite/component cabling,

additional cables are required and sold separately.

Whole Home Conﬁgurations

Ethernet

Use this option if you have wired Ethernet connections available to all TiVo boxes on

your home network.

MoCA

If Ethernet connections are not available in every location you will need to select an

alternate connection method to add TiVo devices to other rooms. A Multimedia over

Coax (MoCA) connection will be required at all locations without direct access to an

Ethernet cable.

Connecting with MoCA

Use this option if the router is not in the same location as the DVR.

Figure A

Figure B

Whole home diagrams can also be found at custom.tivo.com.

Creating MoCA with a DVR

This conﬁguration method will not be available the ﬁrst time through Guided Setup

and is considered advanced. In this conﬁguration Ethernet access is required at the

DVR. All connecting devices can use a combination of Ethernet or coax connections.

See the illustration below for details.

Accessories

TiVo offers several accessories to extend and enhance the entertainment experience

both inside and outside the home. Each of these accessories are easy to install and

offer cutting-edge features and high value to the customer.

TiVo

Mini

See page 12.

TiVo

Stream

TiVo Stream (sold separately) is an accessory for use with the 4-tuner Roamio and

any Premiere DVR. TiVo Stream allows you to watch live TV or recorded shows on

your iPad

, iPhone

and iPod touch

devices running iOS 5.1 or later and download

shows and take them to go.

Figure C

Before installing, TiVo Stream must have been activated on the same account as the

accompanying DVRs. TiVo Stream has its own TiVo Service Number on the bottom

of the unit.

Networking options:

TiVo Stream can only be connected to a home network using an Ethernet cable. This

connection can be anywhere on the network, but TiVo recommends placing the unit

in close proximity to the wireless router (see diagram below).

Software installation:

After connecting TiVo Stream to a home network, the TiVo app setup must be

completed on compatible portable devices. To ﬁnish this portion of the installation,

the following information is required: network SSID and passphrase from the wireless

network, and the Media Access Key (MAK) from the TiVo DVR. You can also log in using

your TiVo account email and password. You can locate the MAK on the DVR by navi-

gating to TiVo Central > Settings & Messages > Account & System Info > Media Access

Key. The MAK is located on the account information screen (see screenshot below).

Write down the Media Access Key.

# ____________-____________- ____________-____________-________

TiVo

Premiere DVR

wired connection

(Ethernet or MoCA)

wireless

router

TiVo Stream mobile device

TiVoPro Tip When using a MoCA-enabled Whole Home network as an IP

solution, TiVo Stream can plug directly into the Ethernet port on a 4-tuner

Premiere or 6-tuner Roamio DVR.

Launch app:

Once the portable device is on the same network as the DVR, launch the TiVo app,

enter the MAK if this was not already done, select the Setting tab in the top left-hand

corner, then select Setup TiVo Stream (see screenshot below).

Slide Pro Remote

With its hidden QWERTY keyboard, ergonomic design

and RF signal, the fully backlit TiVo Slide Pro enhances

your TiVo experience by making it faster and easier to

ﬁnd and record shows, even in the dark. USB dongle

required for use with TiVo Mini or TiVo Premiere DVRs.

DVR Expander

The expander is designed to expand the storage capacity of a single DVR location.

TiVo DVRs are compatible with eSATA hard drives speciﬁcally designed to merge

with the DVR onboard drive to increase capacity. Veriﬁcation of compatibility can

be obtained from manufacturer.

Connect the device to the eSATA port on the back of the DVR.

Disconnecting the eSATA drive will result in a loss of all recording data once it has

been connected. Failure of one drive will result in the failure of both drives in all cases.

EXTERNAL

STORAGE

IP and IR Codes

TiVo Roamio Remote Control

When setting up 3rd party universal remotes, below is a list of IP and IR codes

compatible with current TiVo products.

SPEC-XXXXX 5 November, 2013

TiVo Proprietary and Condential - Do Not Distribute! 2-5

Common Design Speciﬁcation Q2 Series 5 Remote Control

TiVo Consumer Design Remote Control Keys

2.5 Key Codes

Table 2-2 Key Codes – Top Keypad

RCU Key

Description*

NEC IR

expanded

NEC type

code in Hex

RF Payloads

(code in Decimal)

Byte 0* Byte 1

TiVo Key

Vo 0x0d

TV P

wr 10

ZRC

0x40

ve TV 11

Vo 0x11

put 34

ZRC

0x34

Info 13 ZRC 0x35

ck 8D

ZRC

0x0d

Zoo

m 44

Vo 0x44

Gui

de 36

ZRC

0x53

ZRC

0x01

Left

ZRC

0x03

Sel

ect 19

ZRC

0x00

Right

ZRC

0x04

Down

ZRC

0x02

Vol

Up 1C

ZRC

0x41

Ch U

p 1E

ZRC

0x30

Vol

Down 1D

ZRC

0x42

Down 1F

ZRC

0x31

Mute 1B ZRC

0x65

Rec 2

ZRC

0x62

umbs down 18

Vo 0x18

Thumbs up 1A TiVo 0x1a

Play

21 ZRC 0x44

Rewind

22 ZRC 0x48

Pause

ZRC

0x46

Forward

24 ZRC 0x49

Slow

25 TiVo 0x25

RCU Key

Description*

NEC IR

expanded

NEC type

code in Hex

RF Payloads

(code in Decimal)

Byte 0* Byte 1

Instant

replay

ZRC

0x4c

Skip

forward

ZRC

0x4b

A Ye

llow 60

ZRC

0x74

B Bl

ue 61

ZRC

0x71

C Re

d 62

ZRC

0x72

D Gr

een 63

ZRC

0x73

1 28 ZRC

0x21

2 29 ZRC

0x22

3 2A ZRC 0x23

4 2B ZRC

0x24

5 2C ZRC

0x25

6 2D ZRC

0x26

7 2E ZRC

0x27

8 2F ZRC

0x28

9 30 ZRC

0x29

ear 32

ZRC

0x2c

0 31 ZRC

0x20

Enter (Last) 33 ZRC 0x2b

Demand 5D

ZRC

0x52

No R

emote Key

Low Battery

Indicator

Slide Open

Vo 0x95

ide Closed

Vo 0x96

* ZRC = Use Table 2-4 RF4CE ZRC Key Command

Definitions for Byte 0.

TiVo = Use Table 2-5 RF4CE TiVo Vendor-specific

Command Definitions for Byte 0.

Slide Pro Remote

SPEC-XXXXX 5 November, 2013

TiVo Proprietary and Condential - Do Not Distribute! 2-6

Common Design Speciﬁcation Q2 Series 5 Remote Control

TiVo Consumer Design Remote Control Keys

Table 2-3 RF4CE Data Payloads for Key Presses – Bottom Keypad

Key Alone or with Cap Key With Sym Key

Byte 0* Byte 1 Byte 2 Byte 5 Byte 2 Byte 5

A or ` TiVo 0x94 Modier 0x04 0x00 0x35

B or | TiVo 0x94 Modier 0x05 0x02 0x31

C TiVo 0x94 Modier 0x06 0x00 0x06

D or = TiVo 0x94 Modier 0x07 0x00 0x2e

E or + TiVo 0x94 Modier 0x08 0x02 0x2e

F or [ TiVo 0x94 Modier 0x09 0x00 0x2f

G or ] TiVo 0x94 Modier 0x0a 0x00 0x30

H or < TiVo 0x94 Modier 0x0b 0x02 0x36

I or ? TiVo 0x94 Modier 0x0c 0x02 0x38

J or > TiVo 0x94 Modier 0x0d 0x02 0x37

K or / TiVo 0x94 Modier 0x0e 0x00 0x38

L or ‘ TiVo 0x94 Modier 0x0f 0x00 0x35

M or . TiVo 0x94 Modier 0x10 0x00 0x37

N or , TiVo 0x94 Modier 0x11 0x00 0x36

O or “ TiVo 0x94 Modier 0x12 0x02 0x36

P TiVo 0x94 Modier 0x13 0x00 0x13

Q or ~ TiVo 0x94 Modier 0x14 0x02 0x35

R or { TiVo 0x94 Modier 0x15 0x02 0x2f

S or - TiVo 0x94 Modier 0x16 0x00 0x2d

T or } TiVo 0x94 Modier 0x17 0x02 0x30

U or : TiVo 0x94 Modier 0x18 0x02 0x33

V or \ TiVo 0x94 Modier 0x19 0x00 0x31

W or _ TiVo 0x94 Modier 0x1a 0x02 0x2d

X TiVo 0x94 Modier 0x1b 0x00 0x1b

Y or ; TiVo 0x94 Modier 0x1c 0x00 0x33

Z TiVo 0x94 Modier 0x1d 0x00 0x1d

1 or ! TiVo

94 0 0x59 0x02 0x59

2 or @ TiVo 0x94 0 0x5a 0x02 0x5a

3 or # TiVo 0x94 0 0x5b 0x02 0x5b

4 or $ TiVo 0x94 0 0x5c 0x02 0x5c

5 or % TiVo 0x94 0 0x5d 0x02 0x5d

6 or ^ TiVo 0x94 0 0x5e 0x02 0x5e

7 or & TiVo 0x94 0 0x5f 0x02 0x5f

8 or * TiVo 0x94 0 0x60 0x02 0x60

9 or ( TiVo 0x94 0 0x61 0x02 0x61

0 or ) TiVo 0x94 0 0x62 0x02 0x62

Enter TiVo 0x94 0 0x28 0 0x28

Backspace TiVo 0x94 0 0x2a 0 0x2a

SPEC-XXXXX 5 November, 2013

TiVo Proprietary and Condential - Do Not Distribute! 2-7

Common Design Speciﬁcation Q2 Series 5 Remote Control

TiVo Consumer Design Remote Control Keys

Table 2-3 RF4CE Data Payloads for Key Presses – Bottom Keypad

Key Alone or with Cap Key With Sym Key

Byte 0* Byte 1 Byte 2 Byte 5 Byte 2 Byte 5

Space TiVo 0x94 0 0x2c 0 0x2c

Clear TiVo 0x94 0 0x9c 0 0x9c

Left TiVo 0x94 0 0x50 0 0x50

_Up TiVo 0x94 0 0x52 0 0x52

Select TiVo 0x94 0 0x2c 0 0x2c

Down TiVo 0x94 0 0x51 0 0x51

Right TiVo 0x94 0 0x4f 0 0x4f

Search TiVo 0x93 NA NA NA NA

* ZRC = Use Table 2-4 RF4CE ZRC Key Command Definitions for Byte 0.

TiVo = Use Table 2-5 RF4CE TiVo Vendor-specific Command Definitions for Byte 0.

2.6 RF Mode Operation

RF mode is entered by pairing the RCU to a TiVo target device as described in Section 2.2.

When operating in RF mode all of the keys will send the RF4CE codes as specied in Table

2-4. This includes the AV remote keys which will send the RF4CE command followed by the

appropriate IR command. The key presses will be sent multi-channel with Acknowledgement.

If the key can’t be sent successfully after 200 ms then the key press will be transferred using

IR.

Basic RCU functions are supported via standard ZRC codes as dened by Reference [2]

wherever possible. Non-standard buttons are dened using RF4CE vendor specic commands

that mirror the format of the ZRC command header. Table 2-4 contains the ZRC key press

command denitions, Table 2-5 contains TiVo vendor specic commands and Table 2-2

denes the mapping of key presses on the RCU to the RF4CE codes in the payload of the

corresponding commands. “TiVo” and “ZRC” in Table 2-2 refer to the appropriate command

from the corresponding command denition tables.

RF4CE key presses will be sent once when the key is depressed and the key release will be

sent once when the key is released. When a key is pressed and held for more than 50 ms, it

will send the key repeat code every 50 ms. When in RF mode, for unprogrammed AV remote

keys, the TiVo codes will only be sent as RF4CE commands unless the RF transmission fails,

as above.

Table 2- 4 RF4CE ZRC Key Command Deﬁnitions

ZRC Command Code Description

0x00 Reserved

0x01 User Key Pressed

0x02 User Key Repeated

0x03 User Key Released

Home Automation and Control

TiVo DVRs were engineered with the ability to integrate with popular control systems

via IP or IR with a transmitter. By default, the feature that allows network devices to

control the TiVo unit via IP is turned off to ensure network security.

Compatible Control Systems:

Important Default Setting

1. Go to TiVo Central > Messages & Settings > Settings > Remote, CableCARD &

Devices > Network Remote Control

2. Choose Enabled

3. Press Select

These partner companies have the ability to control the TiVo DVR over IP. You should

already be familiar with the mechanics of opening and using TCP connections before

using the protocol.

Appendix 1

TiVo Roamio Remote

The TiVo Roamio remote control has a number of alternate button functions that are

useful for enhancing the DVR experience. New users should become familiar with the

remote as part of the Roamio DVR installation process, especially if this is their ﬁrst

TiVo DVR experience.

11 Live TV/Swap takes you to live TV.

If you’re watching live TV, use it to

swap tuners.

Info shows the channel banner while

watching live TV; press it again to make

it disappear.

Use the arrow buttons to navigate the

TiVo menus and the program guide.

Use Select to choose menu options or

shows to record.

Guide takes you to the program guide,

where you can ﬁnd shows to watch or

record. Press it again to clear the guide.

Play starts playing a show from the

My Shows list.

Press Record to start recording the

show you’re watching, or to set up a

recording for a show selected in the

program guide.

Forward (fast forward) arrows fast-

forward through a program. Press it up

to three times for three speeds.

Advance moves forward in 30-second

increments; press and hold to jump to

the end of the show.

Enter/Last returns you to the last

channel tuned to in live TV.

1 The TiVo button takes you to the TiVo

Central screen, the starting point for

all your TiVo features and settings.

If programmed, TV PWR turns your

TV or A/V receiver on/off.

Use the Thumbs Up and Thumbs

Down buttons to rate shows for

TiVo Suggestions.

3 The Back button quickly exits

applications without having to

scroll all the way to the left.

Pause freezes a show. Press it again

to resume playing.

Back (rewind) arrows rewind a

program. Press it up to three times

for three speeds.

Instant Replay repeats the last 8

seconds of the show. Press and hold

to jump to the beginning of a show.

Slow plays a show in slow motion.

Within the HD menus, the A, B, C, D

buttons sort and ﬁlter views. Look

for the onscreen tips.

Clear removes the display of the

channel banner or program guide

and deletes titles from My Shows

or the To Do List.

Page is loading ...

TiVo Roamio I PRO Installation guide

TiVo Roamio I PRO Installation guide

TiVo Roamio I PRO Installation guide

Related papers

Other documents