DVX Series Mounting Welded Clip
Attachment Quick Guide
09 August 2022
DD3544535
Rev 06
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 1
This document provides a quick overview of the welded clip attachment for vertical mounting clips.
Daktronics requires that a certied welder perform the specied welds in accordance with all
applicable provisions of AWS D1.1 or the equivalent regional welding standard.
The images in this document are for illustrative purposes only and may reect exaggerated sizes for
better comprehension.
Figure 1: Mounting Clip Attachment (Imperial)
TYP
3/16
3/16
1.25
1.25
TYP 3/16
1.25-5.75
Figure 2: Mounting Clip Attachment (Metric)
TYP
5
5
32
32
TYP 5
32-146