2. Daktronics
  3. DD3544535
DD3544535

Daktronics DD3544535 User guide

  • Hello! I've reviewed the document regarding the DVX Series Welded Clip Attachment. It outlines the process for attaching vertical mounting clips and specifies the need for a certified welder to perform the welds according to AWS standards. I'm ready to answer your specific questions or concerns about these mounting clips.
  • What is this document about?
    Who is required to perform the welds?
    What standard should the welds conform to?
DVX Series Mounting Welded Clip
Attachment Quick Guide
09 August 2022
DD3544535
Rev 06
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 1
This document provides a quick overview of the welded clip attachment for vertical mounting clips.
Daktronics requires that a certied welder perform the specied welds in accordance with all
applicable provisions of AWS D1.1 or the equivalent regional welding standard.
The images in this document are for illustrative purposes only and may reect exaggerated sizes for
better comprehension.
Figure 1: Mounting Clip Attachment (Imperial)
TYP
3/16
3/16
1.25
1.25
TYP 3/16
1.25-5.75
Figure 2: Mounting Clip Attachment (Metric)
TYP
5
5
32
32
TYP 5
32-146
/