2. EPH Controls
  3. RFRA RF
RFRA RF

EPH Controls RFRA RF Installation guide

  • Hello! I have reviewed the installation instructions for the EPH Controls RFRA RF Room Thermostat. This document outlines the proper installation methods and safety precautions for the device. It highlights that the thermostat can be mounted in multiple ways and that the user should keep the document for future use. I am ready to answer any questions you have about the device based on this document.
  • Who should install this device?
    Where should I install this thermostat?
    What are the mounting options?
For use in normal environments.
RFRA - RF Room Thermostat Installation Instructions
Page 1 of 1
1
34
5 6
2
If this device is used in a way not specied by the maufacturer, it’s safety may be impaired.
Ensure that this wireless enabled thermostat is installed 1 metre from any metallic object, television,
radio or wireless internet transmitter.
This thermostat can be mounted in the following ways:
To a recessed conduit box
To a surface mounted box
Directly mounted on wall
Table mounted with accessory provided.
CAUTION! Installation and connection should only be carried out by a qualied
person and in accordance with national wiring regulations.
Important: Keep this document
21
2586
86
Press to open
20221103_RFRA_Insins_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk
/