TRFPi2

EPH Controls TRFPi2 Installation guide

  • I have reviewed the provided installation instructions for the EPH Controls TRFPi2 Room Thermostat. This document outlines the proper installation procedures, safety precautions, and mounting options for the device. I'm ready to answer any questions you may have about the thermostat or the content of this document.
  • Who should install the thermostat?
    Who is permitted to open the thermostat?
    What should I do before setting the thermostat?
For use in normal environments.
TRFPi2 Room Thermostat Wireless Installation Instructions
Page 1 of 1
1
34
5 6
2
Only qualied electricians or authorised service sta are permitted to open the thermostat.
If the thermostat is used in a way not specied by the manufacturer, its safety may be impaired.
Prior to setting the thermostat, it is neccessary to complete all required settings described in the section.
CAUTION! Installation and connection should only be carried out by a qualied
person.
This thermostat can be mounted in the following ways:
1) To a recessed conduit box 2) To a surface mounted box 3) Directly mounted on wall
Important: Keep this document
Boiler Plus
20230123_TRFPi2_Insins_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk
/