ZKTeco ZKT2080002 Installation guide

bolts

75" - 86"

Compatible models

65" - 70"

Matching holes 3,

6 2, 5 1, 4

Support hole

position 2 3

55“

A - Left support 1 piece

Cross recessed hex head screw

C - Wall bracket 1 piece

14 pieces

the bolts

Spring cushion M12

Figure 2

Packing list

Attach Wall Bracket to Left Bracket

(as in Figure 2), 3 sets of mounting heights (1

& 4, 2 & 5, 3 & 6), optional on demand.

Figure 1

Adjustable Wrench (User Prepared)

Figure 4

Attach the right bracket to the other end of the bracket

E - Wheels 4 pieces

supports (as in Figure 4).wall (as shown in Figure 3).

Installation of the tray between the two

· To ensure correct and safe use, read

· The maximum weight of the bearing can support up to 100 kg.

carefully read this manual before installation.

on the stand

Phillips Screwdriver (User Prepared)

locating pin

Mobile Stand Installation Guide

ÿ20×ÿ13 mm

figure 3

installation steps

First insert the

4 pieces

2 pieces

Front

hold all 1

F - Bar for hanging on the wall 2 pieces*

Front

tray in the

D - Tray 1pc

Tray in

positioning

B - Right support 1 piece

adjust the

Version: 1.1

M6 screw*

1 PC

Step 2

"*"

Use:

M6 × 130 mm

It is recommended to equip this model with a whiteboard

please refer to the current one.

Set the wheel to the brake state and screw it into the brackets (as

in Figure 1).

Step 3

interactive digital from 55 to 86 inches.

It indicates that due to differences in models, some models include this accessory,

Adjust the wheel to the

braking state before

operation.

Step 1

Step 4

M8 × 25 mm

Wall Bracket Hole Suggestions

Attach the wall hanging bar to the entire machine as required.

necessary (as shown in Figure 5).

Make sure the side of the wall

plate with the locking holes is

the front side.

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia City, Dongguan, China.

Front

Phone: +86 769 - 82109991 Fax: +86 755 - 89602394

When the interactive whiteboard with its own hanging bar cannot be seamlessly combinedHang the complete assembled machine on the

effective with the tripod, you need to modify it together with the wall mount plate, as shown below.

Please refer to the following image for the

wall bracket and lock the security screw of the continuation.

OBSERVATIONS:

Wall hanging bar (as in Figure 6).

finished product.

requires at least 2 professionals to complete.

Make sure the brakes are locked, this step

1Attach the wall mount plate to the wall bracket.

2 Hang the interactive whiteboard on the wall mounting plate and lock the security bolt.

step 5

step 7

step 6

Figure 5 Figure 6

Machine Translated by Google

ZKTeco ZKT2080002 Installation guide

Related papers

Other documents