Jabra ELITE 3 User manual

Jabra Elite 3 - Light Beige

How do I manually reset my Jabra Elite earbuds to the default

settings?

When you reset your Jabra Elite earbuds, previously paired devices and

settings will be cleared.

Follow these steps to reset.

1. Place both earbuds in the charging case with the lid open. Ensure your

earbuds are sufficiently charged.

2. Press and hold (10 sec) the Left and Right buttons on the earbuds

simultaneously until the earbud LEDs flash pink.

3. When the earbud LEDs stop flashing pink, the earbuds have been reset.

Note

You cannot reset only one of the earbuds. If you attempt to reset just one

earbud, it keeps flashing pink until you reset the other.

The earbuds will need to be re-paired with your mobile device. Remember

to delete/forget the pairing in the Bluetooth menu on your mobile device.

29/06/2022 04:59

https://www.jabra.sg/supportpages/jabra-elite-3/100-91410703-98/faq/91065f41-610a-

4660-8baf-2a6749a54f87

Page 1 of 1