Page is loading ...
MADE BY
BREEO IN
LANCASTER
PA, USA
Stainless steel construction
Designed for use with Breeo®
X Airflow® system
7.75" high x 3.5" wide x 6" long
BR-ART
WARNING: This product can expose you to nickel,
which is known to the State of California to cause
cancer and birth defects or reproductive harm. For
more information go to www.p65warnings.ca.gov
BREEO.COM
(800) 413 - 9848
CONTACT@BREEOLLC.COM
©2023 Breeo LLC. All rights reserved. 6/23
FEATURES
MAINTAIN YOUR FIRE PIT
ASH
SHOVEL
ASH
SHOVEL
KEEP YOUR FIRE PIT SMOKELESS
To keep your fire pit burning efficiently, it is necessary to remove built up ash
covering the X Airflow® system and vents. This will ensure that incoming air
is able to enter your fire pit for continued smokeless performance.
STEP 1
Ensure your fire pit and coals are
completely cool before using your
ash shovel.
STEP 2
Using the front tip of the shovel,
drag around the circumference of
the fire pit between the wall and
the X Airflow system to push ash
towards the center.
STEP 3
Shovel ash out from the wall
towards the center and along the
X Airflow system.
Repeat several times on all four
sides of the X Airflow system,
until vents are clear.
HOW TO USE
WARNING
Always practice safety first when
using the Breeo® Ash Shovel.
When using your Breeo Ash
Shovel, exercise the same
precautions with any open fire.
Never leave your Breeo Ash
Shovel unattended, especially
around children and pets. Ash
Shovel may have sharp edges.
DO NOT put ashes into paper bags
or trash cans while embers are
still burning.
Ash Shovel around X Airflow system
/
