Sealey CP20VRP Operating instructions

Type
Operating instructions

Sealey CP20VRP is a 20V cordless rotary polisher with variable speed control from 500 to 3000 RPM, allowing for precise polishing of various surfaces. It features a slide-button on/off switch for easy operation and a spindle lock for quick and effortless pad changes. The polisher comes with a Ø150mm backing pad and side handle, providing stability and control during use. It is compatible with 20V batteries and requires a mains charger, both sold separately.

Sealey CP20VRP is a 20V cordless rotary polisher with variable speed control from 500 to 3000 RPM, allowing for precise polishing of various surfaces. It features a slide-button on/off switch for easy operation and a spindle lock for quick and effortless pad changes. The polisher comes with a Ø150mm backing pad and side handle, providing stability and control during use. It is compatible with 20V batteries and requires a mains charger, both sold separately.

20V Ø150MM CORDLESS ROTARY POLISHER
- BODY ONLY
MODEL NO: CP20VRP
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
 reand/orseriousinjury.
WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this
polisher.
9 Save all warnings and instructions for future reference.
1.2. WORK AREA SAFETY
9 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
8 DO NOT operate power tools in explosive atmospheres, such as in the presence of ammableliquids,gasesordust.Powertools
create sparks which may ignite the dust or fumes.
9 Keepchildrenandbystandersawaywhileoperatingapowertool.Distractionscancause you to lose control.
1.3. PERSONAL SAFETY
9 Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
 tiredorundertheinuenceofdrugs,alcoholormedication.Amomentofinattentionwhileoperatingpowertoolsmayresultinserious
 personalinjury.
9 Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,
 hardhat,orhearingprotectionusedforappropriateconditionswillreducepersonalinjuries.
9 Preventunintentionalstarting.Ensuretheswitchisintheo-positionbeforeconnectingtopowersourceand/orbatterypack,picking
up or carrying the tool.
9 Carryingpowertoolswithyourngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
9 Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.
8 DO NOToverreach.Keepproperfootingandbalanceatalltimes.Thisenablesbettercontrol of the power tool in unexpected
situations.
9 Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhair,clothingand gloves away from moving parts. Loose clothes,
 jewelleryorlonghaircanbecaughtinmovingparts.
9 If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
1.4. POWER TOOL USE AND CARE
8 DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterandsafer
at the rate for which it was designed.
8 DO NOTusethepowertooliftheswitchdoesnotturnitonando.Anypowertoolthatcannotbecontrolledwiththeswitchis 
 dangerousandmustberepaired.
WARNING!Disconnecttheplugfromthebatterypackfromthepowertoolbeforemakinganyadjustments,changingaccessories,or
storing power tools.
9 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
 operatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.
9 Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakageofpartsandanyotherconditionthatmayaect
 thepowertool’soperation.Ifdamaged,havethepowertoolrepairedbeforeuse.Manyaccidentsarecausedbypoorlymaintained
power tools.
9 Usethepowertool,accessoriesandtoolbitsetc.inaccordancewiththeseinstructions,takingintoaccounttheworkingconditions
 andtheworktobeperformed.Useofthepowertoolforoperationsdierentfromthoseintendedcouldresultinahazardous
situation.
1.5. SERVICE
9 Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.Thiswillensurethatthesafetyof
the power tool is maintained.Unauthorisedpartsmaybedangerousandwillinvalidatethewarranty.
1.6. SPECIFIC POLISHER SAFETY
9 WARNING!Disconnectthebatteryandensurethatthepadisatacompletestandstillbeforechangingaccessories,servicingor 
performing any maintenance.
WARNING! Keep all guards and holding screws in place, tight and in good working order.
9 Checkregularlyfordamagedparts.Aguardoranyotherpartthatisdamagedmustberepaired/replacedbeforethepolisherisnext
used.
9 Keepthepolishercleanforbestandsafestperformance.
CP20VRPIssue2(1,2,3)15/07/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear protective
clothing
Wear a mask
9 Before each use check all attachments for condition. If worn or damaged replace immediately.
8 DO NOTswitchthepolisheronuntiltheheadisincontactwiththepanelandswitchtheunitobeforeremovingtheheadfromthe
panel.
8 DO NOTusethepolisherwithabrasivecleanersorrubbingcompoundsasexcessivepaintremovalmayresult.
8 DO NOT get the polisher wet or use in damp or wet locations or areas where there is condensation.
8 DO NOT allow untrained persons to operate the polisher.
9 When not in use, unplug from the mains power supply and store in a safe, dry, childproof area.
2. INTRODUCTION
Digitaldisplayandvariablespeedcontrolfrom500-3000rpm.Featuresaslide-buttonon/oswitchallowingforasmoothcomfortablemain
handlegrip.Spindlelockforfastandeasypadchanges.Doubleinjectioncompositehousingwithrubbergripforaddedcomfort.Supplied
withØ150mmbackingpadandsidehandle.Requirescompatible20Vbatteryandmainscharger,soldseparately.
3. SPECIFICATION
Model No ...............................................................CP20VRP
Battery ................... 20V2Ah-6AhLithium-ion(notincluded)
Consumableparts:
PTC/150VA/M14-DABackingPadforHook-and-LoopDiscsØ148mmM14x2mm,
CP20VBP2-2AhBattery,CP20VBP4-4AhBattery,CP20VBP6-6AhBattery
Free speed ........................................................500-3000rpm
Noisepower/pressure .......................................... 85/74dB(A)
Padsize .................................................................. Ø150mm
Replacement parts:
............................. CP20VMC-MainsCharger(notincluded)
Threadsize ......................................................... M14x2mm
Vibration/uncertainty .......................................... 8.27/1.5m/s²
4. OPERATION
WARNING: Removebatterybeforetting/removingpadsormaintenanceiscarried  out.
NOTE: Whennew,thebatteriesmayhavebeenshippedinalowchargestate.   Fullychargethe
 batteriesbeforeusingyourtool.
4.1. Ensure that you have read, understood and comply with all the safety instructions in
 Section1.
4.2. POLISHING (FIG.1)
4.2.1. Holdingthepolisherrmlyoperatetheon/oswitch.
4.2.2. Tosettherotationalspeedofthepolisherusethe +/- buttons.Toincreasespeed,
press ‘ + ‘, to decrease press ‘ - ‘.
4.2.3. Thereare7speedsettingsavailableandthecurrentonebeingusedisshowninthespeedsettingdisplaywindow.Thevalues 
 displayedare5,8,10,15,20,25,and30.EachstepindicatesanRPMofapproximately100timesthevalueshown.
4.2.4. When polishing, DO NOTapplytoomuchpressure,theweightofthepolishershouldbesucient.AlsoDO NOT work for too long
 inoneareaoryoumaydamagethesurfacebeingworkedon.
4.3. BACKING PAD EXCHANGE (FIG.2)
WARNING: Removebatterybeforetting/removingpadsormaintenanceiscarriedout.
4.3.1. Toremovethebackingpad,pressdownchucklockingbuttonandmanuallyunscrewthepadclockwise(whenviewedfromabove).
5. MAINTENANCE
WARNING: Alwaysdisconnectthebatterybeforecarryingoutanyinspection,maintenanceorcleaning.
5.1. GENERAL INSPECTION
5.1.1. Regularlycheckthatallthexingscrewsaretight.
5.1.2. Repairsshouldbecarriedoutbyanauthorisedservicecentre.
5.2. CLEANING
WARNING:Alwayswearprotectiveequipmentincludingeyeprotectionandgloveswhencleaningthistool.
5.2.1. Keepyourtoolcleanatalltimes.Dirtanddustwillcauseinternalpartstowearquicklyandshortenthedevice’sservicelife.
5.2.2. Cleanthebodyofyourmachinewithasoftbrush,ordrycloth.
5.2.3. Neverusecausticagentstocleanplasticparts.Ifdrycleaningisnotsucient,amilddetergentonadampclothisrecommended.
5.2.4. Watermustnevercomeintocontactwiththetool.Ensurethetoolisthoroughlydrybeforeusingit.
5.2.5. Ifavailable,useclean,drycompressedairtoblowthroughtheventilationholes(whereapplicable).
5.3. LUBRICATION
5.3.1. Lightlylubricateallmovingpartsatregularintervalswithasuitablelubricant.
5.4. STORAGE
5.4.1. Store this tool carefully in a secure, dry place out of the reach of children.
WARNING!Risk of Hand Arm Vibration Injury.
 ThistoolmaycauseHandArmVibrationSyndromeifitsuseisnotmanagedadequately.
 ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.
 Thistoolistobeoperatedinaccordancewiththeseinstructions.
 Measuredvibrationemissionvalue(a)............................8.27m/s²
 Uncertaintyvalue(k):......................................................1.5m/s²
Pleasenotethattheapplicationofthetooltoasolespecialisttaskmayproduceadierentaveragevibrationemission.We 
 recommendthataspecicevaluationofthevibrationemissionisconductedpriortocommencingwithaspecialisttask.
 Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofusefor
each tool.
Original Language Version
© Jack Sealey Limited
g.1
g.2
CP20VRPIssue2(1,2,3)15/07/21
 NB:StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.
 Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.
 Suchfactorsinclude;theoperator,thetaskandtheinsertedtoolorconsumable.
 NB:ensurethatthelengthofleaderhosesissucienttoallowunrestricteduse,asthisalsohelpstoreducevibration.
 Thestateofmaintenanceofthetoolitselfisalsoanimportantfactor,apoorlymaintainedtoolwillalsoincreasetheriskofHandArm
 VibrationSyndrome.
Health surveillance.
 Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescan
 bemodiedaccordingly.
 Personalprotectiveequipment.
 Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe
 uncontrolleduseofthistool.Werecommendasucientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarm
 anddryandmaintaingoodbloodcirculationinngersetc.Pleasenotethatthemosteectiveprotectionisprevention,pleasereferto
 theCorrectUseandMaintenancesectionintheseinstructions.Guidancerelatingtothemanagementofhandarmvibrationcanbe
 foundontheHSCwebsitewww.hse.gov.uk-Hand-ArmVibrationatWork.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
WEEE REGULATIONS
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid
waste authority for recycling information.
BATTERY REMOVAL
UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts
containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack
SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important:NoLiabilityisacceptedforincorrectuseofthisproduct.
Warranty:Guaranteeis36monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
Original Language Version
© Jack Sealey Limited CP20VRPIssue2(1,2,3)15/07/21
  • Page 1 1
  • Page 2 2
  • Page 3 3

Sealey CP20VRP Operating instructions

Type
Operating instructions

Sealey CP20VRP is a 20V cordless rotary polisher with variable speed control from 500 to 3000 RPM, allowing for precise polishing of various surfaces. It features a slide-button on/off switch for easy operation and a spindle lock for quick and effortless pad changes. The polisher comes with a Ø150mm backing pad and side handle, providing stability and control during use. It is compatible with 20V batteries and requires a mains charger, both sold separately.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI