Sealey CP20VRPX Operating instructions

Category
Power tools
Type
Operating instructions

Sealey CP20VRPX is a powerful cordless rotary polisher, ideal for car detailing and paint correction tasks. With a brushless motor for superior performance and durability, it delivers variable speed control from 900 to 2400RPM, allowing you to match the speed to the task. It features two handle positions for added comfort and control, and comes with two interchangeable polishing pad heads for different applications. Compatible with CP20VBP2, CP20VBP4, and CP20VBP6 batteries (sold separately), this polisher offers cordless convenience and freedom of movement.

Sealey CP20VRPX is a powerful cordless rotary polisher, ideal for car detailing and paint correction tasks. With a brushless motor for superior performance and durability, it delivers variable speed control from 900 to 2400RPM, allowing you to match the speed to the task. It features two handle positions for added comfort and control, and comes with two interchangeable polishing pad heads for different applications. Compatible with CP20VBP2, CP20VBP4, and CP20VBP6 batteries (sold separately), this polisher offers cordless convenience and freedom of movement.

20V Ø180MM BRUSHLESS ROTARY
POLISHER - BODY ONLY
MODEL NO: CP20VRPX
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
 reand/orseriousinjury.
WARNING! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this
polisher.
9 Save all warnings and instructions for future reference.
1.2. WORK AREA SAFETY
9 Keep work area clean and well lit. Cluttered or dark areas invite accidents.
8 DO NOT operate power tools in explosive atmospheres, such as in the presence of ammableliquids,gasesordust.Powertools
create sparks which may ignite the dust or fumes.
9 Keepchildrenandbystandersawaywhileoperatingapowertool.Distractionscancause you to lose control.
1.3. PERSONAL SAFETY
9 Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
 tiredorundertheinuenceofdrugs,alcoholormedication.Amomentofinattentionwhileoperatingpowertoolsmayresultinserious
 personalinjury.
9 Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,
 hardhat,orhearingprotectionusedforappropriateconditionswillreducepersonalinjuries.
9 Preventunintentionalstarting.Ensuretheswitchisintheo-positionbeforeconnectingtopowersourceand/orbatterypack,picking
up or carrying the tool.
9 Carryingpowertoolswithyourngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
9 Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.
8 DO NOToverreach.Keepproperfootingandbalanceatalltimes.Thisenablesbettercontrol of the power tool in unexpected
situations.
9 Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhair,clothingand gloves away from moving parts. Loose clothes,
 jewelleryorlonghaircanbecaughtinmovingparts.
9 If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
1.4. POWER TOOL USE AND CARE
8 DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterandsafer
at the rate for which it was designed.
8 DO NOTusethepowertooliftheswitchdoesnotturnitonando.Anypowertoolthatcannotbecontrolledwiththeswitchis 
 dangerousandmustberepaired.
WARNING!Removethebatterypackfromthepowertoolbeforemakinganyadjustments,changingaccessories,or 
storing power tools.
9 Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
 operatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.
9 Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakageofpartsandanyotherconditionthatmayaect
 thepowertool’soperation.Ifdamaged,havethepowertoolrepairedbeforeuse.Manyaccidentsarecausedbypoorlymaintained
power tools.
9 Usethepowertool,accessoriesandtoolbitsetc.inaccordancewiththeseinstructions,takingintoaccounttheworkingconditions
 andtheworktobeperformed.Useofthepowertoolforoperationsdierentfromthoseintendedcouldresultinahazardous
situation.
1.5. SERVICE
9 Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacementparts.Thiswillensurethatthesafetyof
the power tool is maintained.Unauthorisedpartsmaybedangerousandwillinvalidatethewarranty.
1.6. SPECIFIC POLISHER SAFETY
9 WARNING!Disconnectthebatteryandensurethatthepadisatacompletestandstillbeforechangingaccessories,servicingor 
performing any maintenance.
WARNING! Keep all guards and holding screws in place, tight and in good working order.
9 Checkregularlyfordamagedparts.Aguardorotherpartthatisdamagedmustberepaired/replacedbeforethepolisherisnextused.
CP20VRPXIssue113/10/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear protective
clothing
Wear a mask
9 Keepthepolishercleanforbestandsafestperformance.
9 Before each use check all attachments for condition. If worn or damaged replace immediately.
8 DO NOTswitchthepolisheronuntiltheheadisincontactwiththepanelandswitchtheunitobeforeremovingtheheadfromthe
panel.
8 DO NOTusethepolisherwithabrasivecleanersorrubbingcompoundsasexcessivepaintremovalmayresult.
8 DO NOT get the polisher wet or use in damp or wet locations or areas where there is condensation.
8 DO NOT allow untrained persons to operate the polisher.
9 When not in use, unplug from the mains power supply and store in a safe, dry, childproof area.
2. INTRODUCTION
Powerfulcordlessrotarypolisher–bodyonly.Brushlessmotorgivessuperiorperformanceanddurability.Durablecompositehousingwith
softgripforaddedcomfort.Ø180mmbackingpad.Sixspeedsettingsandvariablespeedtriggerwithlockoercompletecontrolrequired
foranygiventask.Withtwohandlepositions,upandoverorsideforpersonalpreference.Suppliedwithtwointerchangeablepolishingpad
headsandkeyforquickbackingpadchanges.Requirescompatible20Vbatteryandmainscharger,soldseparately.
3. SPECIFICATION
MODEL NO: ........................................................CP20VRPX
Battery: ........................ CP20VBP2,CP20VBP4,CP20VBP6
Free Speed: .................................................. 900-2400RPM
NoisePower/Pressure: ........................................ 89/78dB(A)
PadSize: ................................................................ Ø180mm
ThreadSize: ................................................................... M14
Vibration/Uncertainty: ......................................... 5.39/1.5m/s²
CONSUMABLES:
MainsCharger(notincluded):CP20VMC
4. ASSEMBLY
WARNING!Ensurethatyouread,fullyunderstand,andapplythesafetyinstructionsbeforeuse.
WARNING!Ensurebatteryisnotttedbeforeassembly.
4.1. INSTALLING/REMOVING BACKING PAD (g.1)
4.1.1. Toinstallthebackingpad,presstheshaftlockbutton(g.1.1)topreventspindlerotationandthenturnthebackingpad(g.1.2) 
 anticlockwiseasfarasitcango.Toremovethebackingpad,followtheinstallprocedureinreverse.
4.2. ADJUST HANDLE ANGLE(g.2)
4.2.1. Loosenthehexboltonbothsidesofthetoolanticlockwisewithahexwrench(g.2.1)andthenadjusttheangleoftheauxiliary 
 handle.Selectonepositionsuitableforyourwork.
4.2.2. Tightenthehexboltonbothsidesclockwiseasfarasitcango.
4.3. INSTALLING/REMOVING POLISHING PAD
4.3.1. Toinstallthepad,rstremovealldirtandforeignmatterfromthehook-and-loopsystemofthepadandthebackingpad.Attachthe
 padtothebackingpadsothattheiredgesarealigned.
4.3.2. Toremovethepadfromthebackingpad,justpullupfromitsedge.
4.4. SWITCHING ON/OFF(g.3)
4.4.1. Depresstriggerlockbutton(g.3.1)toenablethetrigger(g.3.2)tobepulled.
4.4.2. Toolspeedcanbeadjustedbysqueezingorreleasingthetrigger.
4.4.3. Tostopthetool,fullyreleasethetrigger.
Original Language Version
© Jack Sealey Limited CP20VRPXIssue113/10/21
1
2
1
g.1
g.2
1
2
g.3
4.5. SPEED ADJUSTMENT (g.4)
4.5.1. Thetoolhas6speedsettings.Rolltheswitchselector(g.4.1)totherequiredvalue.
5. MAINTENANCE
WARNING!Beforeattemptinganymaintenance,removethebattery.
WARNING! Wear approved safety eye protection and respiratory protection.
5.1. Keep the machine clean and dry. DO NOTuseabrasivesorsolventsto
clean the unit. Ensure all external head screws are tight.
5.2. Regularly clean the dust covers on the air vents for smooth air circulation.
5.3. Removethedustcoversandcleanthemesh(g.5).
5.4. Whennotinuse,removethebatteryandstoreinasafe,drychildprooflocation.
WARNING! – Risk of Hand Arm Vibration Injury.
This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.
Thistoolistobeoperatedinaccordancewiththeseinstructions.
Measured vibration emission value (a): ..........5.39 m/s²
Uncertainty value (k):...........................1.5 m/s²
Please note that the application of the tool to a sole specialist task may produce a different average vibration emission. We recommend that a
specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.
Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeachtool.
NB: StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.
Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.
Suchfactorsinclude;theoperator,thetaskandtheinsertedtoolorconsumable.
NB:ensurethatthelengthofleaderhosesissufficienttoallowunrestricteduse,asthisalsohelpstoreducevibration.
State of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase risk of Hand Arm Vibration Syndrome.
Health surveillance.
Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedurescanbemodified
accordingly.
Personal protective equipment.
Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe
uncontrolleduseofthistool.Werecommendasufficientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarmanddryand
maintaingoodbloodcirculationinfingersetc.Pleasenotethatthemosteffectiveprotectionisprevention,pleaserefertotheCorrectUseand
Maintenancesectionintheseinstructions.GuidancerelatingtothemanagementofhandarmvibrationcanbefoundontheHSCwebsite
www.hse.gov.uk-Hand-ArmVibrationatWork.
Original Language Version
© Jack Sealey Limited CP20VRPXIssue113/10/21
g.5
g.4
1
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
WEEE REGULATIONS
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid
waste authority for recycling information.
BATTERY REMOVAL
UndertheWasteBatteriesandAccumulatorsRegulations2009,JackSealeyLtdarerequiredtoinformpotentialpurchasersofproducts
containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpak’sregisteredcompliancescheme.Jack
SealeyLtdBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important:NoLiabilityisacceptedforincorrectuseofthisproduct.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
Partssupportisavailableforthisproduct.Pleaseemailsales@sealey.co.ukortelephone01284757500
  • Page 1 1
  • Page 2 2
  • Page 3 3

Sealey CP20VRPX Operating instructions

Category
Power tools
Type
Operating instructions

Sealey CP20VRPX is a powerful cordless rotary polisher, ideal for car detailing and paint correction tasks. With a brushless motor for superior performance and durability, it delivers variable speed control from 900 to 2400RPM, allowing you to match the speed to the task. It features two handle positions for added comfort and control, and comes with two interchangeable polishing pad heads for different applications. Compatible with CP20VBP2, CP20VBP4, and CP20VBP6 batteries (sold separately), this polisher offers cordless convenience and freedom of movement.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI