Asus EEE PC 900 Installation guide

Brand: Asus

Model: EEE PC 900

Category: Interface hubs

Type: Installation guide

The Asus EEE PC 900 is a compact and versatile device that combines portability with impressive functionality. With its slim profile and lightweight design, it's perfect for users on the go. Enjoy seamless multitasking and smooth performance with its efficient processor, enabling you to breeze through daily tasks, browse the web, or work on documents with ease.

The Asus EEE PC 900 is a compact and versatile device that combines portability with impressive functionality. With its slim profile and lightweight design, it's perfect for users on the go. Enjoy seamless multitasking and smooth performance with its efficient processor, enabling you to breeze through daily tasks, browse the web, or work on documents with ease.

TouchKit Setup

Reminder:

Be extremely careful when putting back on

the LCD housing; make sure the screws are

NOT tightened all the way down. Discontinue action

immediately as soon as force is felt on the housing.

Further tightening of the screws will cause touch

screen to crack resulting in inaccurate cursor.

Package Content

Controller Board Preparation

Apply rubber adhesive on the bottom side of the controller board as

insulation.

Eee PC 900 Installation Guide

Step 1.

 Remove all 6 screws for LCD housing.

Step 2.

 Remove all 6 screws for bottom

housing.

Step 3.

 Remove keyboard by pushing in the 3

springs.

Step 4.

 Remove both FPC for keyboard and

touchpad in the direction indicated.

Step 5.

 Remove all 9 screws for keyboard

housing.

Step 6.

1. Use thin double-sided tape to secure the

touch screen panel on the metal frame

of the LCD module.

2. Remove both screws to detach LCD

module from the housing.

Step 7.

 Detach the old connector to the

camera module and replace it Camera

Harness provided by the TouchKit.

Step 8.

 Remove both screws on each side of

the LCD module to detach the LCD

brackets. This is to lower the LCD

module to accommodate the thickness

of the touch screen panel.

 Remember to replace the LCD brackets

back to its’ original position in step 6.

Step 9. Touch Screen Alignment

 Horizontal alignment (direction 1) use

the screw hole as reference point.

 Vertical alignment (direction 2)

approximately 1.5mm~2.0mm from the

bottom edge of the metal frame.

Step 10.

 Place Shock Absorber Rubber on the

metal frame surrounding the touch

screen panel.

Step 11.

 Remove camera connector.

Step 12.

1. Connector placement for touch screen

panel.

2. Camera port on the motherboard to USB

input on the controller (Hub Harness)

3. USB output to camera module (Camera

Harness)

4. USB output (optional expansion)

5. USB output (optional expansion)

Be extremely careful when putting back on the LCD housing; make sure the screws are NOT tightened all

the way down. Discontinue action immediately as soon as force is felt on the housing. Further tightening

of the screws will cause touch screen to crack resulting in inaccurate cursor.

1
2
3
4
5
6

Asus EEE PC 900 Installation guide

Brand: Asus

Model: EEE PC 900

Category: Interface hubs

Type: Installation guide

The Asus EEE PC 900 is a compact and versatile device that combines portability with impressive functionality. With its slim profile and lightweight design, it's perfect for users on the go. Enjoy seamless multitasking and smooth performance with its efficient processor, enabling you to breeze through daily tasks, browse the web, or work on documents with ease.

Other documents