Bauknecht EMZ 4466/01 IN Program Chart

Brand: Bauknecht

Model: EMZ 4466/01 IN

Category: Microwaves

Type: Program Chart

This manual is also suitable for

EMZ 4466/01 AL

EMZ 4466/01 PRODUCT DESCRIPTION SHEET

5019 410 53061

Off

Oven light

STATIC FUNCTION

Use when all the food is on the same runner level.

Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red

thermostat indicator light switches off.

Ideally, the shelf should be on the second runner level when using the static function.

STATIC FUNCTION + FAN

Use this function when cooking on two different levels.

Oven preheating is not necessary (except for pizzas and focaccia).

Switch the position of the dishes in the oven 10 minutes before the end of cooking time.

Remove the cooked dish and, if necessary, continue cooking the other one for as long as required.

GRILL FUNCTION

Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.

The oven door must be closed during the cooking cycle.

Preheat the grill for about 5 minutes.

Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the

bottom to reduce smoke and fat spatters.

Turn over the meat about half-way through cooking time.

GRILL + FAN

Ideal for large joints, pork, chicken and roast beef.

The oven door must be closed during the cooking cycle.

Place the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the

bottom to reduce smoke and fat spatters.

Turn over the meat about half-way through cooking time.

DEFROST FUNCTION

Ideal for thawing frozen food to room temperature.

The food should be inserted in the oven in its wrapping to prevent it from drying out.

FAN + BOTTOM HEATING ELEMENT

This function is ideal for:

large fruitcakes

timbales

stuffed vegetables

pizza

poultry (more than 3 kg.)

Oven preheating is not necessary (except for pizzas and focaccia).

FAN FUNCTION

Use this function when cooking food on more than one level (e.g.: fish, vegetables, pasta)

Choose foods that require the same cooking temperature.

Oven preheating is not necessary.

Remove the cooked dish and, if necessary, continue cooking the other one for as long as required.

BOTTOM HEATING FUNCTION

Use:

To finish baking fruitcakes or cheesecakes.

To thicken sauces.

Use the lower heating function for the last 10 or 15 minutes of cooking time.

OVEN

First

Last

First...Last

: Runner positions

Control panel

Cooling fan (not visible)

Upper heating element

Grill element (can be lowered)

Lateral halogen lamp

Circular heating element (not visible)

Fan

Lower heating element (not visible)

Oven door hinges

10.

Oven cool door

Accessories :

Grid

 Baking tray

 Drip Tray

 Sliding shelves

 Grease filter

CONTROL PANEL

Oven functions selector knob

Oven thermostat knob

Thermostat indicator light

Control knob for front, left cooking zone*

0 1 ...10

Control knob for rear, left cooking zone*

0 1 ...10

Control knob for rear, right cooking zone*

0 1 ...10

Control knob for front, right cooking zone*

0 1 ...10

Cooktop ON indicator light

*The cooktop control knobs are not

interchangeable. After cleaning or servicing,

they must be returned to their original

positions.

The cooling fan can run at two speeds:

1) Full speed

2) Reduced speed

The fan speed depends on the temperature of

the oven and/or cooktop.

After the oven and/or the cooktop switch off,

the cooling fan may, however, continue to run

for a certain time to ensure proper cooling.

Note:

a safety switch is fitted to the front of the

oven. Opening the oven door when the oven is

off, the internal light will come on. Opening the

door when the oven is in operation, the fan and

the heating element will switch off.

OVEN FUNCTIONS

Turn the selector knob to the required symbol.

The oven light switches on.

 Turn the thermostat knob clockwise to the required temperature.

The red thermostat indicator light switches on.

 When the required temperature is reached, the red thermostat indicator light switches off.

End of cooking cycle:

 Return the knobs to the OFF position (0 - ).

The cooktop control knobs are marked with a numerical scale corresponding to different power

settings, and a series of function symbols.

KEEP WARM FUNCTION

This function uses a low power setting so that food can be kept warm when cooking is finished.

How to operate:

1. Turn the knob to .

2. To deactivate the Keep Warm function, change the knob position.

DUAL ZONE FUNCTION

(DEPENDENT ON MODEL)

This function is available on the front left and rear left cooking zones. The dual-zone function extends

the heated area of the cooktop so that you can use large, oval or rectangular pans.

How to operate:

1. Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start flashing.

2. Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit

to show that the cooktop is switched on.

3. To deactivate the function return the knob to 0.

FAST BOILING FUNCTION

This function makes it possible to bring water to the boil fast; the Fast Boiling function remains active

for a preset time. Once the preset time has elapsed, the cooktop returns automatically to maximum

power level. The Fast Boiling function can be activated also once you have already started cooking.

Warning: Make sure you have placed the pan on the cooking zone before activating the fast boiling

function or the glass-ceramic surface may be damaged.

Specified performance values for the Fast Boiling function are guaranteed for all types of glass-ceramic

cooktops.

How to operate:

1. Place the pan on the chosen cooking zone.

2. Set

the knob to .

ICP FUNCTION

(INITIAL COOKING PHASE)

This function accelerates the heating of the selected cooking zone for a specified amount of time during

the first part of the cooking cycle.

How to operate:

1. Turn the knob to

2. Wait until the residual heat indicator starts flashing, then turn the knob anti-clockwise to the

desired power level. For example: if the power level is 1, the cooking zone will operate at full

power for 1 minute, then it will switch to power level 1 for the remainder of the cooking cycle,

unless the position of the knob is changed. If the power level is 6, the cooking zone will operate

at full power for 6 minutes, then will switch to level 6 for the rest of the cooking cycle, unless the

position of the knob is changed. This applies to all power levels with the exception of level 10.

GENTLE HEAT FUNCTION

Can be used to raise dough, soften hard butter from the fridge, keep a baby's bottle or a baby food

warm, for yoghurt making, melting chocolate, etc...

This function is available only when the residual heat indicator light is on.

How to operate:

1. Make sure that the relative cooking zone residual heat indicator light is on.

2. Turn the knob to .

To deactivate the function change the knob position.

SWITCHING THE OVEN ON

COOKTOP FUNCTIONS

This symbol does not correspond to any cooktop mode; the heating element is not powered.

Bauknecht EMZ 4466/01 IN Program Chart

Brand: Bauknecht

Model: EMZ 4466/01 IN

Category: Microwaves

Type: Program Chart

This manual is also suitable for

EMZ 4466/01 AL

Download PDF

report

Bauknecht EMZ 4466/01 IN Program Chart

This manual is also suitable for

Bauknecht EMZ 4466/01 IN Program Chart

Related papers

Other documents