AKZ 317 PRODUCT DESCRIPTION
SHEET
DE
AT GR RU RO
5019 100 55391
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Oven light
6.
Circular heating element
7.
Fan
8.
Lower heating element (not visible)
9.
Door hinge
10.
Oven door
1.
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Control knob for front, left cooking zone*
01...10
5.
Control knob for rear, left cooking zone*
01...10
6.
Control knob for rear, right cooking zone*
01...10
7.
Control knob for front, right cooking zone*
01...10
8.
Cooktop “ON” indicator light
*The cooktop control knobs are not
interchangeable. After cleaning or servicing, they
must be returned to their original positions.
The cooling fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the
oven and/or cooktop.
After the oven and/or the cooktop switch off, the
cooling fan may, however, continue to run for a
certain time to ensure proper cooling.
Important:
An optional kit consisting of an oven
door glass and of relevant mounting components, is
available by the After-Sales Service. The use of the
kit reduces the temperature of the outer oven
surface and is strongly recommended if there are
Kids in the house.
Code N°: 4819 310 39186
.
i
OVEN
CONTROL PANEL
Accessories:
•Grid
• Baking tray
•Drip tray
Last
First
5019 100 55391
GB
0
Off
Oven light
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Pre-heat the oven to the required cooking
temperature and place the food inside as soon as
the red thermostat indicator light switches off.
-
Ideally, the shelf should be on the second runner
level when using the static function.
STATIC FUNCTION + FAN
Use this function when cooking on two different levels.
-
Oven preheating is not necessary (except for
pizzas and focaccia).
-
Switch the position of the dishes in the oven 10
minutes before the end of cooking time.
-
Remove the cooked dish and, if necessary, continue
cooking the other one for as long as required.
GRILL FUNCTION
Use the grill function to cook small pieces of meat
(steaks, sausages) and for making toasts.
-
The oven door must be closed during the
cooking cycle.
-
Preheat the grill for about 5 minutes.
-
Arrange the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover
the bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through
cooking time.
GRILL + FAN FUNCTION
Ideal for large joints, pork, chicken and roast beef.
-
The oven door must be closed during the
cooking cycle.
-
Place the meat on the grid with the drip tray
underneath. Pour water in the drip tray to cover
the bottom to reduce smoke and fat spatters.
-
Turn over the meat about half-way through
cooking time.
DEFROST FUNCTION
Ideal for thawing frozen food to room temperature.
-
The food should be inserted in the oven in its
wrapping to prevent it from drying out
FAN +BOTTOM HEATING FUNCTION
This function is ideal for:
-
large fruitcakes
-
timbales
-
stuffed vegetables
-
pizza
-
poultry (more than 3 kg)
Oven preheating is not necessary (except for pizzas
and focaccia).
FAN FUNCTION
Use this function when cooking food on more than
one level (e.g.: fish, vegetables, pasta).
-
Choose foods that require the same cooking
temperature.
-
Oven preheating is not necessary.
-
Remove the cooked dish and, if necessary,
continue cooking the other one for as long as
required.
BOTTOM HEATING FUNCTION
Use:
-
To finish baking fruitcakes or cheesecakes.
-
To thicken sauces.
Use the lower heating function for the last 10 or 15
minutes of cooking time.
.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the
required temperature.
The red thermostat indicator light switches on
.
• When the required temperature is reached, the
red thermostat indicator light switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - •).
.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
5019 100 55391
GB
The cooktop control knobs are marked with a numerical
scale corresponding to different power settings, and a
series of function symbols.
KEEP WARM FUNCTION
This function uses a low power setting so that food can
be kept warm when cooking is finished.
How to operate:
1.
Turn the knob to .
2.
To deactivate the Keep Warm function, change the
knob position.
DUAL ZONE FUNCTION
(dependent on model)
This function is available on the front left and rear left
cooking zones. The dual-zone function extends the
heated area of the cooktop so that you can use large,
oval or rectangular pans.
How to operate:
1.
Turn the knob to and wait for the residual heat
indicator for the chosen hotplate to start flashing.
2.
Select the required power by turning the knob anti-
clockwise. The residual heat indicator remains lit to
show that the cooktop is switched on.
3.
To deactivate the function return the knob to
“0”
.
FAST BOILING FUNCTION
This
function makes it possible to bring water to the boil
fast; the Fast Boiling function remains active for a preset
time. Once the preset time has elapsed, the cooktop
returns automatically to maximumpower level. The Fast
Boiling function can be activated also once you have
already started cooking.
Warning:
Make sure you have placed the pan on the
cooking zone before activating the fast boiling function
or the glass-ceramic surface may be damaged.
Specified performance values for the Fast Boiling
function are guaranteed for all types of glass-ceramic
cooktops.
How to operate:
1.
Place the pan on the chosen cooking zone.
2.
Set
the knob to .
GENTLE HEAT FUNCTION
Can be used to raise dough, soften hard butter from the
fridge, keep a baby's bottle or a baby food warm, for
yoghurt making, melting chocolate, etc...
This function is available only when the residual heat
indicator light is on.
How to operate:
1.
Make sure that the relative cooking zone residual
heat indicator light is on.
2.
Turn the knob to .
3.
To deactivate the function change the knob
position.
COOKTOP FUNCTIONS
This symbol does not correspond to any
cooktop mode; the heating element is not
powered
-
1
-
2
-
3
Whirlpool AKZ 317 WH Program Chart
- Type
- Program Chart
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool 6AKP 635 IX Program Chart
-
-
-
-
-
-
Whirlpool AKR 191/IX/01 User guide
-
Whirlpool AKR 191/IX/02 Program Chart
-
-
Other documents
-
Bauknecht BSZ 5000/01 IN Program Chart
-
-
-
-
Bauknecht BSZ 4007 SW Owner's manual
-
-
-
Bauknecht BMZ 4006 AL Program Chart
-
-