sales@bocci.com
www.bocci.com
www.bocci.com
© 2022, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
LOW VOLTAGE LUMINAIRE
E476186
Ø116 (4.5”)
adjustable
up to 3000
(10’)
standard
adjustable
up to
24600
(80’)
custom
40
(1.6”)
US Patent Pending
EU Patent # 008526131-0001
Made in Vancouver, Canada
DESCRIPTION
The deep canopy in this 100 variant refers to the canopy size depth capable
of accommodating the power supply inside (standard outside of North America
and Latin America). The deep canopy is 116mm (4.5”) in diameter and 40mm
(1.6”) deep. It is designed for surface mounted applications that cannot make
use of a junction box or ceiling cavity. This fi xture is designed to be horizontal,
meaning that the pendants don’t hang directly below, but instead trail off across
a space, around a corner or simply deviate from their gravitational directive.
As such, this fi xture is designed to be hung from any number of optional swag
points mounted elsewhere from the canopy.
100 brings multiple glass artists together in a performative act. Molten glass
bubbles are prepared and then smashed together to produce unpredictable
interlocking glass forms.
NOTES
+ Purchase replacement lamps online at www.bocci.com/shop/bulbs
+ Aircraft cable lengths are adjustable on site - 3000mm (10’) is the standard
maximum. Drop lengths specifi ed in 3m/10’ increments and are cut to length
on site with steel cable cutters (cutters not supplied).
PENDANTS: one
MOUNTING: deep brushed nickel canopy 116mm (4.5”) in diameter
x 40mm (1.6”) deep
LAMPING: 1.5w LED (2000K, 2500K, 3500K)
CABLE: adjustable. 3000mm (10’) standard / up to 24600mm
(80’) maximum
MATERIALS: blown glass, braided metal coaxial cable, electrical
components, swag hooks, aircraft cable, brushed nickel
canopy
WEIGHT: approximately 3.6kg (7.9lb)
POWER SUPPLIES: integral. Power supplies included
PRODUCT SPECIFICATION
SEMI-RIGID, DEEP CANOPY
100.1
150-191
(5.5”-7.5”)
1 234567
© 2022, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
For additional assistance,
please contact Bocci:
sales@bocci.com
www.bocci.com
www.bocci.com
Clean fi ngerprints from
surfaces.
LOW VOLTAGE LUMINAIRE
E476186
The client is responsible
to ensure fasteners are
attached to a robust structural
substrate.
Tuck the power supply and
wiring into the canopy. Line up
the fastener holes or connect
directly to structural ceiling
surface using the fasteners
provided.
Turn power to fi xture on.
Very carefully uncoil the braided
coaxial cable in a spool like
manner. Insert your index fi ngers
into opposite sides of the roll
then rotate your fi ngers around
each other to unroll the coaxial
cable.
Use patience: allow the cable to
uncoil completely to avoid kinks.
Determine the overall drop for
the pendant fi xture.
setscrews
strain relief
12V
Neutral
(white)
Line
(black)
white (LED)
blue (230V)
white (110V)
black (LED)
brown (230V)
black (110V)
DEEP CANOPY
Thread the coaxial cable
through the canopy, use a
2mm Allen key to loosen the
setscrew in the canopy and
gently feed the cable through
until you have reached your
desired drop length.
Use Allen key to tighten the
setscrew to hold the strain
relief and secure the coaxial
cable at its new length.
Perform a gentle tug test to
ensure it is secure.
DO NOT OVERTIGHTEN.
Note: The strain relief is a
black plastic collar around the
coaxial cable. There is a single
slot opening on the side of the
strain relief component. It is
essential that this opening is
oriented at 90 degrees to set
screw chamber. There can be no
contact between the set screw
and the cable.
RISK OF ELECTRIC SHORT!
Xenon (110V) or LED: connect
the black wire to black and
white wire to white wire.
Xenon (230V): connect black
wire to brown wire and white
wire to blue wire.
Connect the coaxial cable to
the open slots in the terminal
block on the 12V side of the
power supplies.
For multiple pendant
installations, ensure that the
braided outer wires are all
connected to one 12V output
wire and all inner insulated
wires are connected to the
other or a short will occur.
Once all coaxial connections
are made, lift the fi xture into
position and connect the line
voltage to the open slot in the
appropriate terminal block.
PRODUCT INSTALLATION INSTRUCTIONS
100.1
Please note that the crisp cut
edges of the 100 pendants
are fragile and can chip if
not handled with care when
installing and cleaning.
Bocci recommends wearing
gloves during the installation. The
edges of the glass may be sharp
to handle.
Attach the lamp holder to the
pendant hardware with set
screw provided.
Plug the lamp into lamp
holder. Do not touch the lamp
with your bare hands. Ensure
power to lamp is working
correctly.
lamp holder
lamp
diffuser
cover cap
screws
© 2022, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
891011
For additional assistance,
please contact Bocci:
sales@bocci.com
www.bocci.com
www.bocci.com
Clean fi ngerprints from surfaces.
LOW VOLTAGE LUMINAIRE
E476186
100.1
Feed the aircraft cable through the pendant hardware
and into the cable gripper. Slide the cable gripper into
channel on the pendant hardware. Pull the aircraft cable
and slide the cable gripper to adjust the height.
Once height of pendant is confi rmed, cut the aircraft
cable using aircraft cutters.
Slide on the diffuser.
Ensure that the ceiling at the swag location is strong
enough to hold 2kg (5lbs) before attaching swag hook
with the provided screws.
Set the screws (provided) into an appropriate anchor
(not provided).
Thread the swag hook on to the mounting plate,
ensuring all the threads are engaged.
Mark a point directly above the pendants desired location
and screw.
PRODUCT INSTALLATION INSTRUCTIONS
mark location
on ceiling
mounting plate
swag hook
Slide the ball end of the aircraft into the slot on the
swag hook. Give this a pull test, make sure that the ball
is seated.
SEMI-RIGID
PRODUCT INSTALLATION INSTRUCTIONS
100.1
© 2022, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
For additional assistance,
please contact Bocci:
sales@bocci.com
www.bocci.com
www.bocci.com
Clean fi ngerprints from surfaces.
LOW VOLTAGE LUMINAIRE
E476186
15141312
US Patent Pending
EU Patent # 008526131-0001
Made in Vancouver, Canada
100.1
Give the pendant a gentle pull to ensure the screws are
locked onto the pendant.
Slide cover cap onto the coaxial cable and place into
the inset portion of the pendant hardware.
The cover cap should sit fl at on the pendant hardware.
If the screws are sticking out and the cap isn’t sitting
fl at on the pendant hardware, please check to ensure
the screws are fully engaged.
Refer to previous illustration for more details.
Insert the pendant hardware assembly into the pendant.
Tighten the 3 screws until they are fully engaged (refer to
illustration above).
PRODUCT INSTALLATION INSTRUCTIONS
SEMI-RIGID
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
BCCI 28.1 User manual
-
BCCI 28.7 User manual
-
BCCI 28.28 User manual
-
BCCI 28.16 User manual
-
BCCI 28.1mi User manual
-
Hanover HBUBBLECLR-1PD Operating instructions
-
Hanover HLUMCRSTD-1MC Operating instructions
-
Aura Light Berzelia Street CL2070 User manual
-
Signature Hardware 479853 BALIDO Pendant User manual
-
Acuity Brands S2PI SLOT 2 Pendant Suspended Linear Lighting User manual
