sales@bocci.com
www.bocci.com
www.bocci.com
© 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
LOW VOLTAGE LUMINAIRE
E476186
adjustable
up to 3000
(10’)
standard
adjustable
up to 30500
(100’)
custom
203 (8”)
±165 (6.5”)
±305 (12”)
32
(1.3”)
28.7 PRODUCT SPECIFICATION
approx 8kg (17.6lb)
US Patent # D687,740
EU Patent # 001695834-001 to 004
Made in Vancouver, Canada
DESCRIPTION
28.7 is a random confi guration of seven 28 pendants hung from a round
canopy. The pendants are designed to hang in a random confi guration at
times clustering and grouping together and others trailing off. The result is an
ambient installation or fi eld of light. The pendant drop lengths on this fi xture are
adjustable up to the specifi ed maximum.
28 is an exploration of specifi city in manufacturing. Instead of designing form
itself, here the intent was to design a system of making that yields form.
Individual 28 pendants result from a complex glass blowing technique whereby
air pressure is intermittently introduced into and then removed from a glass
matrix which is intermittently heated and then rapidly cooled. The result is
a distorted spherical shape with a composed collection of imploded inner
shapes, one of which acts as a shade for the light source.
Standard 28s are made with clear glass exterior spheres and milk white
interior lamp holder cavities. 28s are possible with infi nite versatility in colour
compositions, sizes and shapes.
NOTES
+ Purchase replacement lamps online at www.bocci.com/shop/bulbs
+ Unless otherwise noted when ordering, all fi xtures will be outfi tted to be
xenon compatible
+ As an alternative to a built-in power supply, Bocci recommends mounting
power supplies remotely in an easily accessible and hidden location for ease
of long-term maintenance.
PENDANTS: seven
MOUNTING: brushed nickel canopy 203mm (8”) in diameter x 32mm
(1.3”) deep
LAMPING: 1.5w LED or 20w xenon
COAX: adjustable. 3000mm (10’) standard / up to 30500mm
(100’) maximum
MATERIALS: blown glass, braided metal coaxial cable, electrical
components, brushed nickel canopy
WEIGHT: approximately 8kg (17.6lb)
POWER
SUPPLIES:
integral
1 234567
© 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: [email protected]
For additional assistance,
please contact Bocci:
sales@bocci.com
www.bocci.com
www.bocci.com
Clean fi ngerprints from
surfaces.
LOW VOLTAGE LUMINAIRE
E476186
Determine the overall drop for
the pendant fi xture.
Very carefully uncoil the braided
coaxial cable in a spool like
manner. Insert your index fi ngers
into opposite sides of the roll
then rotate your fi ngers around
each other to unroll the coaxial
cable.
Use patience: allow the cable to
uncoil completely to avoid kinks.
setscrews
strain relief
12V
Neutral
(white)
Line
(black)
white (LED)
blue (230V)
white (110V)
black (LED)
brown (230V)
black (110V)
Thread the coaxial cables
through the canopy, use a
2mm Allen key to loosen the
setscrew in the canopy and
gently feed the cable through
until you have reached your
desired drop length.
Use Allen key to tighten the
setscrew to hold the strain
relief and secure the coaxial
cable at its new length.
Perform a gentle tug test to
ensure it is secure.
DO NOT OVERTIGHTEN.
Note: The strain relief is a
black plastic collar around the
coaxial cable. There is a single
slot opening on the side of the
strain relief component. It is
essential that this opening is
oriented at 90 degrees to set
screw chamber. There can be no
contact between the set screw
and the cable.
RISK OF ELECTRIC SHORT!
The client is responsible
to ensure fasteners are
attached to a robust structural
substrate.
Tuck the power supply and
wiring into the canopy. Line up
the fastener holes or connect
directly to structural ceiling
surface using the fasteners
provided.
Turn power to fi xture on.
Xenon (110V) or LED: connect
the black wire to black and
white wire to white wire.
Xenon (230V): connect black
wire to brown wire and white
wire to blue wire.
Connect the coaxial cable to
the open slots in the terminal
block on the 12V side of the
power supplies.
Ensure that the braided outer
wires are all connected to one
12V output wire and all inner
insulated wires are connected
to the other or a short will
occur.
Once all coaxial connections
are made, lift the fi xture into
position and connect the line
voltage to the open slot in the
appropriate terminal block.
Bocci lamps are included. Plug
the lamp into the socket. Do
not touch the lamp with your
bare hands. Ensure power to
lamp is working correctly.
Remove the center cap
from 28 pendant. Install 28
pendant by sliding the center
cap onto the coaxial cable,
gently insert the lamp into
the pedant, then tighten the
center cap connection by
hand.
DO NOT OVERTIGHTEN.
Remove the protective fi lm
from the center cap after
assembly.
Note: when using a dimmer
use only low voltage electronic
dimmer.
US Patent # D687,740
EU Patent # 001695834-001 to
004
Made in Vancouver, Canada
central cap
PRODUCT INSTALLATION INSTRUCTIONS28.7
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
BOCCI 28.1 Random Operating instructions
-
BOCCI 28.13 User manual
-
BOCCI 28.11 Random Operating instructions
-
BOCCI 100.1m Operating instructions
-
BOCCI 100.7 Semi Rigid User manual
-
BOCCI 100.1m Owner's manual
-
BOCCI 100.1 User manual
-
BOCCI 21.7 User manual
-
BOCCI 100.28 Operating instructions
-
BOCCI 28.9 User manual
