Danfoss ET9100 is a hydraulic hose saw designed for clean and safe cutting of hydraulic hoses up to 1-1/4" ID. It features a toothed blade that slices through the hose without creating a kerf, resulting in less friction, heat, and debris. The saw is equipped with a vacuum port for attaching a shop vac to remove dust, smoke, and smell during cutting. It also has a 1.5 HP motor and a 7" OD x .093 THK blade with a 3/4" arbor.
Danfoss ET9100 is a hydraulic hose saw designed for clean and safe cutting of hydraulic hoses up to 1-1/4" ID. It features a toothed blade that slices through the hose without creating a kerf, resulting in less friction, heat, and debris. The saw is equipped with a vacuum port for attaching a shop vac to remove dust, smoke, and smell during cutting. It also has a 1.5 HP motor and a 7" OD x .093 THK blade with a 3/4" arbor.
Danfoss ET9100 is a hydraulic hose saw designed for clean and safe cutting of hydraulic hoses up to 1-1/4" ID. It features a toothed blade that slices through the hose without creating a kerf, resulting in less friction, heat, and debris. The saw is equipped with a vacuum port for attaching a shop vac to remove dust, smoke, and smell during cutting. It also has a 1.5 HP motor and a 7" OD x .093 THK blade with a 3/4" arbor.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI