2. Saxby Lighting
  3. 67699

Saxby Lighting 67699 User manual

  • Hello! I've reviewed the instruction manual for the Saxby Lighting outdoor fitting models 67699 and 67700. This manual includes important safety guidelines, detailed assembly instructions and highlights the product features, such as its suitability for outdoor use and the requirement for a solid mounting surface. I'm ready to answer any questions you have about this document or the installation process.
  • What type of supply is required?
    Is it safe to install on soil?
    What tools are needed for installation?
INSTRUCTION MANUAL
Safety Warnings
Assembly/ User Instructions
Canillo Outdoor Fitting (67699, 67700)
Regulations and Building Regulations (Part P).
This product is only suitable for connection to a 240v~50Hz supply and is for outdoor use.
1.0mm2 (not supplied) to selected site, ensuring it is adequately protected through the full length of the cable
must be connected to Earth.
commencing installation.
a cable buried in the ground shall incorporate an earthed armour or metal sheath or both, suitable for use as a
ground.
NOT be installed on soil.
Before you start
the product is fully assembled as illustrated before use.
The Light pack contains: The following tools may be required:
Electric drill and assorted drill bits.
Electrical insulation tape.
1. Diagram A.
is a solid mounting surface - do not install on soil.
2.
www.saxbylighting.comSaxby Lighting EU Manufacturer: 1 Gnarrenburg, 27442
UK Manufacturer: BH17 7BY
Assembly/ User Instructions Continued
3. Diagram B.
4.
5.
base.
6.
7.
8. Ensure the rubber seal is in place for ingress protection. Do not overtighten.
9.
Diagram A
250mm Min
Diagram B
(not supplied).
www.saxbylighting.com
V3 11/06/2021 EU Manufacturer: 1 Gnarrenburg, 27442
UK Manufacturer: BH17 7BY
/