Endon 82016 User manual

Pendant

Safety Warnings

INSTRUCTION MANUAL

• This product is only suitable for connection to a 240V~50Hz supply in accordance with current IEE wiring

regulations, and should be installed in accordance with local Building Regulations. They are for domestic,

indoor ceiling use only, and are not suitable for a Bathroom location.

•

circuit breaker).

•

switch off the appropriate circuit breaker before commencing installation. Ensure that no one else has

• This is a Class 1 product and must be Earthed. The terminal blocks are supplied according to

• This product contains non-replaceable LEDs. If the LEDs become damaged, they cannot be replaced, and

the product must be replaced.

•

Assembly/ User Instructions

The Light pack contains:

Terminal connection block.

The following tools may be required:

Electric drill and assorted drill bits.

Wire strippers.

electrician.

Before you start

Care Information

Allow 10 minutes to cool before replacing, adjusting or cleaning.

electrical connections. Ensure there is a solid mounting surface, preferably a wooden joist or joist bridge to

4. Height adjustment: This will be easier to complete before attaching the product to the ceiling. The height of

NOTE: This is a Class 1 product and must be Earthed.

complete.

82016-82018_27122021

EU Manufacturer: Brilliant AG,

Brilliantstrasse 1, D-27442 Gnarrenburg

UK Manufacturer: BH17 7BY

Assembly/ User Instructions Continued

8. Turn on the power and test.

EU Manufacturer: Brilliant AG,

Brilliantstrasse 1, D-27442 Gnarrenburg

UK Manufacturer: BH17 7BY