INSTRUCTION MANUAL
Safety Warnings
Assembly/ User Instructions
Canillo Outdoor Fitting (67699, 67700)
Regulations and Building Regulations (Part P).
This product is only suitable for connection to a 240v~50Hz supply and is for outdoor use.
1.0mm2 (not supplied) to selected site, ensuring it is adequately protected through the full length of the cable
must be connected to Earth.
commencing installation.
a cable buried in the ground shall incorporate an earthed armour or metal sheath or both, suitable for use as a
ground.
NOT be installed on soil.
Before you start
the product is fully assembled as illustrated before use.
The Light pack contains: The following tools may be required:
Electric drill and assorted drill bits.
Electrical insulation tape.
1. Diagram A.
is a solid mounting surface - do not install on soil.
2.
www.saxbylighting.comSaxby Lighting EU Manufacturer: 1 Gnarrenburg, 27442
UK Manufacturer: BH17 7BY
Assembly/ User Instructions Continued
3. Diagram B.
4.
5.
base.
6.
7.
8. Ensure the rubber seal is in place for ingress protection. Do not overtighten.
9.
Diagram A
250mm Min
Diagram B
(not supplied).
www.saxbylighting.com
V3 11/06/2021 EU Manufacturer: 1 Gnarrenburg, 27442
UK Manufacturer: BH17 7BY
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Saxby Lighting 13799 User manual
-
Saxby Lighting 103253 User manual
-
Saxby Lighting 46395 User manual
-
Saxby Lighting 49910 User manual
-
Saxby Lighting 92312 User manual
-
Saxby Lighting 102671 User manual
-
Saxby Lighting 78560 User manual
-
Saxby Lighting 60894 User manual
-
Saxby Lighting 92273 User manual
-
Saxby Lighting 102454 User manual
