Moen Caldwell WS84440 Series Two-Handle Widespread Lavatory Faucet User manual
- Category
- Faucets
- Type
- User manual
Rev. 05/23
DESCRIPTION
• Duralock™ quick connect installation
• Metal construction with various finishes identified by suffix
• 1/2” IPS connections
• Includes non-metal pop-up waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as
indicated by the corresponding product markings
• 1.2 gpm max (4.5L/min) at 60 psi
• 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1234 cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA
B125.1, and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with
California water efficiency regulations
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
• Visit www.moen.com/support for complete details and limitations
Caldwell™
Two-Handle Widespread Lavatory Faucet
NOTE: SPOUT INSTALLS THROUGH 1-1/8” MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8” MIN. DIA. HOLE.
For Deck Thickness 1-3/8” to 3”, use service kit number 175709.
MODELS: WS84440 Series
CLEVELAND FAUCET GROUP • 25300 AL MOEN DRIVE • NORTH OLMSTED, OHIO 44070 • (888) 450-5522 • www.cfgonline.com
SPECIFICATIONS
CRITICAL DIMENSIONS
DO NOT SCALE
There is more than one version of this model.
Page down to identify the version you have.
2-1/2”
64mm
5-5/8”
143mm
1-1/4” (32mm) max.
deck thickness
3-7/8”
98mm
8” 203mm
Centers
3-3/16”
97mm 4-7/8”
124mm
2-1/2”
64mm 2-1/2”
64mm
3-7/8"
(98mm)
2-1/2"
(64mm)
3-13/16"
(97mm)
4-7/8"
(124mm)
Lift
Rod
5-5/8"
(143mm)
8" (203mm) -
16" (406mm) Centers
Max Deck Thickness
1-1/4" (32mm)
4" (102mm) -
8" (203mm)
2-1/2"
(64mm)
2-1/2"
(64mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
DESCRIPTION
• Duralock™ quick connect installation
• Metal construction with various finishes identified by suffix
• 1/2” IPS connections
• Includes non-metal pop-up waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Caldwell
™
Two-Handle Widespread
Lavatory Faucet
Model: WS84440 series
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.
For Deck Thickness 1-3/8" to 3", use service kit number
115001. Valves install through 1-1/4" dia. hole.
Rev. 11/18
M•pact System
There is more than one version of this model.
Page down to identify the version you have.
3-7/8"
(98mm)
2-1/2"
(64mm)
3-3/4"
(95mm)
4-7/8"
(124mm)
Lift
Rod
5-5/8"
(143mm)
8" (203mm) -
16" (406mm) Centers
Max Deck Thickness
1-1/4" (32mm)
4" (102mm) -
8" (203mm)
2-1/2"
(64mm)
2-1/2"
(64mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2” IPS connections
• Includes non-metal pop-up waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
FLOW
• Aerator is limited to 1.5 gpm max (5.7 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Caldwell
™
Two-Handle Widespread
Lavatory Faucet
Model: CA84440 series
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA. HOLE.
VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE.
For Deck Thickness 1-3/8" to 3", use service kit number
115001. Valves install through 1-1/4" dia. hole.
Rev. 11/18
-
1
-
2
-
3
Moen Caldwell WS84440 Series Two-Handle Widespread Lavatory Faucet User manual
- Category
- Faucets
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI