Aqua A-LEGIO SENSE User manual

ADSP9000055 11/05/2021 Rev.1.0 1/12

PANEL-MOUNTED DOSING SYSTEM - OPERATION AND MAINTENANCE

A-LEGIO SENSE

FOR OTHER LANGUAGES:

A-POOL TOP EVO PH-CL     
 
      ENGLISH 
 
    3/12 
 
 
CONTENTS 
DESCRIPTION ......................................................................................................................... 4 
1 PANEL COMPOSITION ..................................................................................................... 4 
2 TECHNICAL SPECIFICATIONS ........................................................................................ 4 
3 OVERALL DIMENSIONS .................................................................................................. 5 
4 HYDRAULIC SPECIFICATIONS PUMP HC151+ .............................................................. 5 
5 FUNCTIONAL CHARACTERISTICS OF THE AE-START+ INSTRUMENT ...................... 5 
6 HC151+ PUMP CONNECTIONS ....................................................................................... 5 
7 AE-START+ INSTRUMENT CONNECTIONS .................................................................... 5 
PROGRAMMING THE PANEL ................................................................................................ 6 
1 HC151+ PUMP MENUS AND PROGRAMMING ............................................................... 6 
2 AE-START+ INSTRUMENT MENUS AND PROGRAMMING ............................................ 6 
PROBE INSTALLATION AND MAINTENANCE ...................................................................... 6 
1 CL(J) 4-20 mA PROBE ..................................................................................................... 6 
2 CL(J) PROBE with mV signal .......................................................................................... 8 
3 CLEANING THE PROBE HOLDER FILTER ..................................................................... 9 
EXPLODED VIEW ........................................................................................................................ 10 
 
   

A-POOL TOP EVO PH-CL

ENGLISH

4/12

1. DESCRIPTION

The A-LEGIO SENSE panel has been designed to control the proliferation of legionella and other hydrodiffused

pathogens through an ON / OFF or proportional dosage of sodium hypochlorite or chlorine dioxide at the same

time as a dosage of an anticorrosive conditioner.

In general, it is composed of:

• 1 AE-START + CL instrument for the measurement of free chlorine;

• 1 pump HC151 + (PImA model) to dose an inhibitor (anticorrosive) product controlled by a pulse-

emitting counter;

• 1 pump HC151 + (PimA model) with automatic air purge to dose a disinfectant product (sodium

hypochlorite, etc.) controlled by the AE-START + CL instrument;

• 1 membrane amperometric probe for the determination of free chlorine;

• 1 modular HT probe holder, proximity sensor and flow regulator;

• 1 HT prefilter.

For the pump managed by the chlorine measuring instrument, the dosage mode set in the factory is the

proportional one: the dosage is proportional to two mA values (4mA and 20mA).

1.1 PANEL COMPOSITION

▪ Panel

▪ Membrane chlorine probe 0-5ppm

▪ n. 1 temperature probe (optional)

▪ HT water filter 9”3/4 complete of AC-HT cartridge 80 micron, 10x14 tube fittings

▪ Roll of PVC tube 10X14 (4m)

▪ Controller, pump and panel programming manuals

▪ n.2 PVDF injection valve

▪ n.2 PVDF foot filter

▪ Roll of PE tube for delivery (4 m)

▪ Roll of PVC tube for suction (4 m)

▪ Roll of PVC tube for air bleed (4 m)

1.2 TECHNICAL SPECIFICATIONS

Supply: 110-240VAC – 50/ 60Hz

Panel dimensions: L 650 x H 600 x D 250 mm

Max power: 60 W (with pumps in “C” curve)

A-POOL TOP EVO PH-CL

ENGLISH

5/12

1.3 OVERALL DIMENSIONS

NB: although devices may be arranged differently on the panel depending on the model selected, the

panel’s overall dimensions do not change.

NB: although devices may be arranged

differently on the panel depending on the

model selected, the panel’s overall

dimensions do not change.

1.4 HYDRAULIC SPECIFICATIONS PUMP HC151+

Please refer to the HC151+ pump manual.

1.5 FUNCTIONAL CHARACTERISTICS OF THE AE-START+ INSTRUMENT

Please refer to the AE-START+ instrument manual.

1.6 HC151+ PUMP CONNECTIONS

Please refer to the HC151+ pump manual.

1.7 AE-START+ INSTRUMENT CONNECTIONS

Please refer to the AE-START+ instrument manual.

1.8 COMPLETE MANUALS

The complete manuals are available on:

HC151+ PI-MA AE-START+

 CAUTION: Always disconnect the electrical power supply before servicing the device.

A-POOL TOP EVO PH-CL

ENGLISH

6/12

2. PROGRAMMING THE PANEL

After installing and connecting all the required probes and devices for the purchased panel, follow the

programming instructions set out in the pump and instrument manuals.

A list summarising the operations to follow for each panel is provided below.

2.1 HC151+ PUMP MENUS AND PROGRAMMING

Please refer to the HC151+ pump manual.

2.2 AE-START+ INSTRUMENT MENUS AND PROGRAMMING

Please refer to the AE-START+ instrument manual.

3. PROBE INSTALLATION AND MAINTENANCE

3.1 CL(J) 4-20 mA PROBE

1. Take the CL(J) probe out of the package and unscrew the membrane cap on the lower part of the

probe:

2. Lower the rubber ring on the membrane cap before filling it with the electrolyte gel provided in the

package:

A-POOL TOP EVO PH-CL

ENGLISH

7/12

3. Immerse the probe in the cap, being careful to prevent any excess electrolyte from spilling over (if

so, rinse).

4. Unscrew the top part of the probe and connect the bipolar cable to the probe and the instrument’s

CL terminal box:

5. Screw the top part back in place and insert the probe in the proper probe holder.

6. Secure the probe in place on the probe holder:

A-POOL TOP EVO PH-CL

ENGLISH

8/12

3.2 CL(J) PROBE with mV signal

To fit the CL(J-mV) probe to the modular probe holder, follow the instructions provided for the CL(J) 4-20mA

probe; to prepare the probe for use, proceed as follows:

- Remove the protective cap and unscrew the membrane cap from the cell body.

- Open the electrolyte bottle, screw the nozzle in place and allow any excess air to come out.

- Fill the membrane cap with electrolyte to the level as shown (see figure); avoid the formation of air

bubbles as much as you can.

- Eliminate any air bubbles by gently tapping the cap over a flat surface. Position the cell vertically on

the filled membrane cap and screw the cap by hand until flush; proceed slowly to avoid damaging

the membrane and be careful not to cover the breather hole with your fingers, because excess

electrolyte should be free to flow out.

- Remove the electrolyte coming out with a damp cloth or rinse

with water.

To perform the electrical connections, follow the diagram provided in the instrument’s manual.

1. Electrolyte bottle

2. Membrane cap

3. Nozzle

4. Breather hole

L. Electrolyte fill level

A-POOL TOP EVO PH-CL

ENGLISH

9/12

3.3 CLEANING THE PROBE HOLDER FILTER

1) Close the valve.

2) Remove the fork.

3) Extract the filter.

4) Pull the filter out and clean it with water.

5) Unscrew the breather plug and the cap.

6) Allow water to run through the probe holder until free of debris and dirt.

7) Fit everything back in place.

1 2 3

4 5 6

A-POOL TOP EVO PH-CL

ENGLISH

10/12

EXPLODED VIEW

A-POOL TOP EVO PH-CL

ENGLISH

12/12

MANUALE D’USO E MANUTENZIONE PANNELLO DOSAGGIO

A-LEGIO SENSE

FOR OTHER LANGUAGES:

Aqua A-LEGIO SENSE User manual

Other documents