2. HARVIA
  3. Ventura
Ventura

HARVIA Ventura User manual

  • I have reviewed the document for the Ventura-sauna interior installation. It includes instructions for both straight and end support benches, covering aspects like verifying bench heights, attaching supports, and mounting lamp shade brackets. I'm here to assist with any questions you have about the installation process or the features detailed in the manual.
  • What should I verify before starting the bench installation?
    Are support legs always necessary for benches?
    What are the sheet metal brackets for?
27122016/Y05-0315
VENTURA
Instructions for Installation of Ventura-sauna interior
• Read also general instructions of installation
• Verify bench height from your sauna plan. Regular bench heights have been
used in this manual.
2
2.
4,5 x 60 mm
4,5 x 60 mm
1.
6 x 70 mm
VENTURA
Installation of straight benches
Attach locking woods.
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Support legs can be xed to the
longer benches if needed.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
3
3.
4.
360 mm
500 mm
55 mm
Attach safety
railing to the wall
with the U-piece.
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal brackets for the lamp shades. Attach footrest to the bench
frame.
4
1.
VENTURA
Installation of the end support benches
2.
6 x 70 mm
1000 mm
600 mm
Attach plywood pieces and bench
supports.
Verify bench height
from your sauna plan.
Regular bench heights
have been used in this
manual.
4 x 30 mm (n. 6 kpl/ca 6 st.)
4,5 x 60 mm
Attach bench frames together.
Attach locking woods.
Support legs can be xed to the
longer benches if needed.
5
3.
4.
360 mm
500 mm
55 mm
4 mm
4 x 60 mm
300 mm
Attach backrests.
Lift shades to the
sheet metal brackets.
Attach sheet metal
brackets for the
lamp shades.
6
7
/