IMPORTANT
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the fl oor.
Assembly Instruction 2 / 3
A
STEP 2
Attach Side Leg (B) to seat unit, Back
(E) and Rail (F) with Head Cap Bolts.
STEP 1
Place Seat (D) upside down on a soft cloth.
Attach Front Leg (A) to Seat (D) with
Head Cap Bolts. (see Figure 1)
Figure 1
Head Cap Bolt
STEP 3
Attach Side Leg (C) to unit with Head
Cap Bolts.
D
E
F
B
C
Head Cap Bolt