Home Styles 5650-49 is a versatile storage solution that combines a hall tree and a storage bench. It features a sturdy construction with a combination of wood and metal components. The hall tree section includes four hooks for hanging coats, hats, and bags, providing convenient storage for everyday items. The bench provides ample seating space and includes a hidden storage compartment beneath the seat, accessible via spring-loaded supports, which can be used to store shoes, blankets, or other household items. The unit also includes adjustable levelers to ensure stability on uneven surfaces.
88 5650 49
Hall Tree & Storage Bench
Home Styles Consumer Assistance : www.homestyles-furniture.com,
Hardware List
Part List
IMPORTANT NOTE
.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
B.
Side Panel
1 Pc.
C.
Side Panel
1 Pc.
A.
Seat
1 Pc.
D.
Front Panel
1 Pc.
E.
Back Panel
1 Pc.
F.
Base
1 Pc.
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Cross Dowel
8 Pcs.(+1 extra)
M3.5x16
Wood Screw
4 Pcs.(+1 extra)
Wood Plug
8 Pcs.(+1 extra)
Spring Support
1 Pc.
M6x30
Head Cap Bolt (short)
3 Pcs.(+1 extra)
M6x50
Head Cap Bolt (long)
8 Pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver, Level
Assembly Instructions 2/6
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
C
B
D
B
A
B
A
B
F
B
E
Head Cap Bolt (long)
Head Cap Bolt
(short)
Wood Plug
Cross Dowel
STEP 1
Insert Cross Dowels
into the holes in Front
Panel (D) and
Back Panel (E).
Attach Side Panels (B)
and (C) to Front Panel
(D) and Back Panel (E)
with Head Cap Bolts
(long). (See Figure 1)
Figure 1
Figure 4
Figure 2 Figure 3
STEP 3
Attach Seat (A) to unit with Head Cap Bolts (short).
Put Base (F) into place.
Cover all holes with Wood Plugs.
(See Figure 4)
Attach Spring Supports to Seat (A) with
STEP 2
Wood Screws into the pre-drilled holes.
(See Figures 2 and 3)
88 5650 49
Hall Tree & Storage Bench
Home Styles Consumer Assistance : www.homestyles-furniture.com,
Hardware List
Part List
IMPORTANT NOTE
.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
G.
To p
1 Pc.
J.
Back Frame
1 Pc.
K.
Back Frame
1 Pc.
L.
Back Frame
1 Pc.
M.
Back Frame
1 Pc.
H.
Side Panel
1 Pc.
I.
Side Panel
1 Pc.
O.
Arm
1 Pc.
N.
Arm
1 Pc.
M4x16
Wood Screw
8 Pcs.(+1 extra)
Wood Plug
8 Pcs.(+1 extra)
Hook
4 Pcs.
M6x30
Head Cap Bolt (short)
20 Pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver, Drill, 3/8” Drill Bit, Level
Assembly Instructions 4/6
E
L
E
M
E
H
E
I
E
K
E
J
E
J
Figure 1
STEP 1
Attach Hooks with Wood Screws
into the pre-drilled holes in Back Frame (J).
(See Figure 1)
Assemble Back Frames (J),
STEP 2
(K), (L) and (M).
Attach Side Panels (H) and (I)
STEP 3
to unit with Head Cap Bolts (short).
Head Cap Bolt (short)
Wood Screw
Hook
Assembly Instructions 5/6
Figure 2
Figure 3
E
G
E
N
E
O
Head Cap Bolt (short)
Head Cap Bolt (short)
Head Cap Bolt (short)
Wood Plug
STEP 4
Attach Top (G) to unit
with Head Cap Bolts (short).
Attach Arms (N) and (O) to unit
With Head Cap Bolts (short).
Attach Top Unit to Base Unit with
STEP 5
Head Cap Bolts (short).
Cover all holes with Wood Plugs.
(See Figure 2)
To level the unit, adjust the adjustable levelers
STEP 6
on the bottom of the legs.
(See Figure 3)
Note : Unit must be level to work properly.
Wood Screw
Wall Screw
M3.5x13
Wood Screw
1 pc.(+1 extra)
Anchor
1 pc.(+1 extra)
Bracket
2 pcs.(+1 extra)
Tipover Restraint
1 pc.(+1 extra)
Hardware List
Drill 3/8” hole in wall
Top of unit
Attention!
To help reduce the risk of the unit tipping over, the Tipover Restraint be installed followingmust
these instructions exactly!
M3.5x40
Wall Screw
1 pc.(+1 extra)
tie end
loop end
Place unit at desired location.
Drill a hole in wall3/8”
at the appropriate location.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole at top
of unit with Wood Screw.
Use Tipover Restraint to secure Bracket
on unit to Bracket on wall.
(See Figure X)
Put tie end of Tipover Restraint into loop end
of Tipover Restraint and pull until tight.
Figure X
Assembly Instructions 6/6
Bracket
on wall
Anchor in wall
3/8” wall hole
Bracket at
top of unit
Tipover
Restraint
1
2
3
4
5
6
Home Styles 5636-88 Assembly Instructions
Crosley Furniture CF7020-WH Installation guide
Homestyles 5050-76F Assembly Instructions
Homestyles 5050-13 Assembly Instructions
Kenroy Home 65083TWAL Installation guide
TRIOBIKE BOXTER User manual