2. Bike Tree
  3. HD

Bike Tree HD, HD-101 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Bike Tree HD Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLY INSTRUCTIONS
PACKAGE INCLUDES:
ITEM 1: FORK (1) ITEM 5: WALL TUBE (1)
ITEM 2: LEGS (2) -2a & 2b ITEM 6: QUICK-RELEASE PINS (2)
ITEM 3: LOWER TUBE (1) ITEM 7: HANGER RODS (2)
ITEM 4: HUBS (2)
NOTE: HUBS AND LEGS ARE PACKAGED TOGETHER FOR SPACE SAVINGS.
REMOVE ALL PACKAGING AND SLIDE HUBS FROM LEG PARTS BEFORE ASSEMBLY
FIGURE A: HUB ASSEMBLY
ITEM 7
ITEM 4
HUB
ASSEMBLY
HUB
ASSEMBLY
1. HUB ASSEMBLY:
Insert hanger rod (ITEM 7) into desired position within the hub
and slide rear hub cover to close. See Figure A for details.
REPEAT for second hub assembly.
FOR MORE INFORMATION, PLEASE CONTACT US::
1701 W. 10th St. Suite 18 Tempe, Arizona 85281 USA
480-968-2656 www.bike-tree.com
2. Insert legs (ITEM 2 --2a & 2b) into fork (ITEM 1).
3. Insert lower tube (ITEM 3) into ITEM 1.
4. Slide first HUB ASSEMBLY over ITEM 3 and
secure using quick-release pin (ITEM 6).
5. Slide second HUB ASSEMBLY over wall tube
(ITEM 5) and secure using quick-release pin
(ITEM 6).
6. Insert ITEM 5 into ITEM 3.
7. Lean assembled Bike Tree against wall.
Vertical tubes must be parallel to the wall.
Rubber feet of both legs must be equally spaced
from wall.
8. Adjust height of lower HUB ASSEMBLY so lower
bicycle tires are off the ground.
9. Adjust height of upper HUB ASSEMBLY so
upper bicycle clears the loweer bicycle.
10. Always center bicycles on the
hanger rods (ITEM 7)
/