Watts 0958240 Installation guide

Type
Installation guide

This manual is also suitable for

CHOOSE THE PROPER ONE FOR INSTALLING YOUR FAUCET
Watts Premier • 8716 W Ludlow Dr. #1 • Peoria, AZ 85381
1-800-752-558 • premierh2o.com
Stud
Nut
Metal Washer
Lock Washer
Spacer
Escutcheon
Air Gap
Window
Rubber
Washer
Split Washer
Brine
Input
Brine
Output
Installation of Air Gap Faucet
1.Drill A7/8" hole in the sink or counter top
or use the available hole.
2.Place the chrome washer and the rubber
washer on the base of the faucet.
3.Attach the 1/4" brine water discharge line
to the brine input (small) barb and 1/4" or
3/8" drain line to the brine output (large)
barb.
4.Mount the faucet and assemble the
hardware as shown.
Air Gap Faucet
Black Iocating washer
Lock nut
Counter top
Rubber O-ring
Split Washer
Installation of Push-In Standard Faucet
or metal washer
Used where a 1/2" hole is
available , reverse when
mounting on stainless steel
or when using drilled hole.
Brass escutcheon
Black Iocating washer
Lock nut
Counter top
Split Washer
Installation of Standard Faucet
(Used where a 1/2" hole is
available , reverse when
mounting on stainless steel
or when using drilled hole)
Brass escutcheon plate
Black Iocating washer
1/4" Tube insert
1/4" Ferrule
1/4" Compression nut
1/4" Tube
3/8" Tube insert
3/8" Ferrule
3/8" Compression nut
3/8" Tube
3/8" Faucet adapter
& seal converts 1/4"
to 3/8"
199406
  • Page 1 1

Watts 0958240 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI