NXT600c

WatchDog NXT600c User manual

Hello! I've reviewed the user manual for the Seaira Global Pump NXT 600c/85c. This document provides detailed instructions on how to perform basic pump cleaning, including how to prepare cleaning solutions, remove filters, and reactivate the pump. I am ready to assist you with any questions you may have about the information provided.
What cleaning solutions can I use?

What should I do if I get cleaning solution on the coils?

How do I know when to stop adding clean water in the last step?

Tools:

•Cleaning Solution (choose one of the following):

Option #1

• 4 ounces white vinegar

• 12 ounces water

Option #2

• 1 ounce bleach

• 15 ounces water

•Approx. 32 ounces clean water

1. First, mix your cleaning solution using one of the options listed above.

2. Next, remove the magnetic ﬁlter strip.

3. Pull on one of the black tabs to remove the preﬁlter.

Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445

www.seairaglobal.com

Basic Pump Cleaning

WatchDog

NXT

85

600

c

/

c

4. Slide out the MERV-10 ﬁlter (the MERV-10 ﬁlter comes standard on the unit but you may also

have a carbon or HEPA ﬁlter).

5. If you have moved the dehumidiﬁer out of its normal spot to clean it, make sure the drain tube

is installed and the water has somewhere to drain. Press the drain button on the display to drain

the reservoir. Disconnect power to the dehumidiﬁer

Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445

www.seairaglobal.com

6. Slowly pour the cleaning solution into the drain tray, moving from side to side to evenly

distribute it. NOTE: If you get any of the cleaning solution on the coils, ﬂush with water.

Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445

www.seairaglobal.com

7. Let the cleaning solution soak for 10-15 minutes. Reconnect the dehumidiﬁer to power.

8. Pour clean water into the drain tray, until you hear the pump activate twice (normally 16-32

ounces).

Drain Tray

Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445

www.seairaglobal.com

9. Finally, replace the ﬁlters and the magnetic strip to return the unit to operational status.

Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445

www.seairaglobal.com

/

Related papers

Other documents