2. WatchDog
  3. NXT600c
NXT600c

WatchDog NXT600c User manual

  • I have reviewed the provided user manual for the Seaira Global NXT 600c/85c air purifier. The document provides step-by-step instructions on removing the side panels. It details the tools needed and the process of removing filters before you proceed to remove panels. I am ready to answer any questions you might have about the device based on this document.
  • What tools are required to remove the side panels?
    What is the first step in removing the side panels?
    What type of filter comes standard with the unit?
Tools:
•Phillips Head Screwdriver
-OR-
•#2 Phillips Drill (Optional)
1. Lift off the magnetic strip and set aside.
2. Pull on one of the black tabs to remove the prefilter.
3. Slide out the MERV-10 filter (the MERV-10 filter comes standard on the unit but you may also
have a carbon or HEPA filter).
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com
How to Remove the Side Panels
WatchDog
NXT
85
600
c
/
c
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com
#1
#2
#3
#4
#5
#6
#7
#8
#9
Seaira Global • 14021 NC Highway 50 • Surf City, NC 28445
www.seairaglobal.com
/