The Corsair iCUE H100i is an extreme performance LCD liquid CPU cooler that provides powerful cooling and customizable aesthetics for your gaming PC. With its vivid 2.1-inch IPS LCD display, you can monitor system performance, temperatures, and adjust settings on the fly. The cooler features two 120mm AF RGB ELITE PWM fans that deliver exceptional airflow and static pressure, ensuring optimal cooling. It also comes with a Commander CORE XT controller that allows you to control fan speeds, lighting effects, and LCD display content.
The Corsair iCUE H100i is an extreme performance LCD liquid CPU cooler that provides powerful cooling and customizable aesthetics for your gaming PC. With its vivid 2.1-inch IPS LCD display, you can monitor system performance, temperatures, and adjust settings on the fly. The cooler features two 120mm AF RGB ELITE PWM fans that deliver exceptional airflow and static pressure, ensuring optimal cooling. It also comes with a Commander CORE XT controller that allows you to control fan speeds, lighting effects, and LCD display content.
ENGLISH
Note: Most newer PC cases include a CPU cut-out to allow access to the bottom of
the motherboard. If your case does not include a cut-out, you will need to remove your
motherboard from the case prior to installation. ELITE LCD XT coolers come with the
Intel mounting bracket pre-installed on the pump for quick installation.
Please ensure you power down your entire PC before installation.
The LCD module, the pump, and the Commander CORE are sensitive to
hotplugging and ESD.
TABLE OF CONTENTS
INTEL (All Sockets)
AMD AM5/AM4
AMD sTRX4
INSTALLATION
FAQ
1
ENGLISH
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
B
H
N
E
K
A
G
M
D
J
P
C
I
O
F
L
ENGLISH
INCLUDED HARDWARE
Highlighted parts for Intel installation only
x4 INTEL 1200/1150/1151/1156/1155
STANDOFFS
x4 INTEL 2011/2011-3/2066 STANDOFFS x4 INTEL 1700 STANDOFFS
x1 INTEL BACKPLATE x1 INTEL MOUNTING BRACKET
(PRE-INSTALLED)
x4 THUMBSCREWS
x4 AMD AM5/AM4 STANDOFFS x1 AMD AM5/AM4 MOUNTING BRACKET x1 AMD sTR4/sTRX4
MOUNTING BRACKET
x4 AMD sTR4/sTRX4 STANDOFFS x16 LONG FAN SCREWS (H100i)
x24 LONG FAN SCREWS (H150i/H170i)
x8 RADIATOR SCREWS (H100i)
x12 RADIATOR SCREWS (H150i/H170i)
x8 WASHERS (H100i)
x12 WASHERS (H150i/H170i)
x2 AF RGB ELITE FANS (H100i)
x3 AF RGB ELITE FANS (H150i/H170i)
COMMANDER CORE
USB Y-SPLITTER
INTEL
2
D
ALGA 1200/1150/
1151/1155/1156
BLGA 2011/
2011-3/2066
CLGA 1700
ENGLISH
1. INSTALLING THE INTEL BACKPLATE
2. INSTALLING THE INTEL STANDOFF SCREWS
Adjust backplate for your required
socket.
Note: Intel LGA 2011/2011-3/2066
do not require backplate installation.
Proceed to step 2.
> Attach the provided Intel standoff
for your socket.
> Use (A) for LGA 1200/115X,
(B) for LGA 2011/2011-3/2066
or (C) for LGA 1700.
> Tighten all four screws until
firmly secured.
ENGLISH
ENGLISH
3
Please continue to Page 10 to continue your installation.
L
M
N
K
F
ENGLISH
3. INSTALL THE FANS AND RADIATOR
Attach the radiator and the fans
as shown. For the best cooling
performance, we recommend
mounting the fans as an air-intake
to your PC case.
4. INSTALLING THE PUMP UNIT
> Align the bracket and pump over the
standoff screws as shown.
> Attach the thumbscrews (F) to the
standoff screws as shown.
> Tighten the thumbscrews until all
four corners are firmly secured.
ENGLISH
4
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
B
H
N
E
K
A
G
M
D
J
P
C
I
O
F
L
ENGLISH AMD AM5/AM4
Highlighted parts for AMD AM5/AM4 installation only
x4 INTEL 1200/1150/1151/1156/1155
STANDOFFS
x4 INTEL 2011/2011-3/2066 STANDOFFS x4 INTEL 1700 STANDOFFS
x1 INTEL BACKPLATE x1 INTEL MOUNTING BRACKET
(PRE-INSTALLED)
x4 THUMBSCREWS
x4 AMD AM5/AM4 STANDOFFS x1 AMD AM5/AM4 MOUNTING BRACKET x1 AMD sTR4/sTRX4
MOUNTING BRACKET
x4 AMD sTR4/sTRX4 STANDOFFS x16 LONG FAN SCREWS (H100i)
x24 LONG FAN SCREWS (H150i/H170i)
x8 RADIATOR SCREWS (H100i)
x12 RADIATOR SCREWS (H150i/H170i)
x8 WASHERS (H100i)
x12 WASHERS (H150i/H170i)
x2 AF RGB ELITE FANS (H100i)
x3 AF RGB ELITE FANS (H150i/H170i)
COMMANDER CORE
USB Y-SPLITTER
ENGLISH
INCLUDED HARDWARE
5
E H
Figure 1 Figure 2
L
M
N
K
ENGLISH
2. INSTALL THE FANS AND RADIATOR
3. PREPARE THE MOTHERBOARD FOR INSTALLATION
1. INSTALLING THE AMD AM5/AM4 MOUNTING BRACKET
Attach the radiator and the fans
as shown. For the best cooling
performance, we recommend mounting
the fans as an air-intake
to your PC case.
Remove the existing AMD AM5/AM4
mounting brackets shown.
> Remove the integrated Intel
mounting bracket (Figure 1).
> Install the AMD AM5/AM4 bracket
by pushing both sides into the slot
on the pump until secure (Figure 2).
Note: It is important that the
AMD AM5/AM4 retention bracket
be evenly secured on all sides
before installation.
ENGLISH
6
Please continue to Page 10 to continue your installation.
G
F
ENGLISH
4. INSTALLING THE AMD AM5/AM4 STANDOFF SCREWS
5. INSTALLING THE PUMP UNIT
> Attach the provided AMD AM5/AM4
standoffs to the CPU socket.
> Tighten all four screws until
firmly secure.
Align the bracket with the AMD AM5/AM4
standoffs as shown. Tighten the
thumbscrews (F) until secure.
ENGLISH
7
ENGLISH
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
B
H
N
E
K
A
G
M
D
J
P
C
I
O
F
L
ENGLISH AMD sTRX4
INCLUDED HARDWARE
Highlighted parts for AMD sTRX4 installation only
x4 INTEL 1200/1150/1151/1156/1155
STANDOFFS
x4 INTEL 2011/2011-3/2066 STANDOFFS x4 INTEL 1700 STANDOFFS
x1 INTEL BACKPLATE x1 INTEL MOUNTING BRACKET
(PRE-INSTALLED)
x4 THUMBSCREWS
x4 AMD AM5/AM4 STANDOFFS x1 AMD AM5/AM4 MOUNTING BRACKET x1 AMD sTR4/sTRX4
MOUNTING BRACKET
x4 AMD sTR4/sTRX4 STANDOFFS x16 LONG FAN SCREWS (H100i)
x24 LONG FAN SCREWS (H150i/H170i)
x8 RADIATOR SCREWS (H100i)
x12 RADIATOR SCREWS (H150i/H170i)
x8 WASHERS (H100i)
x12 WASHERS (H150i/H170i)
x2 AF RGB ELITE FANS (H100i)
x3 AF RGB ELITE FANS (H150i/H170i)
COMMANDER CORE
USB Y-SPLITTER
8
E I
Figure 1 Figure 2
J
ENGLISH
ENGLISH
ENGLISH
1. INSTALLING THE AMD sTRX4 MOUNTING BRACKET
> Remove the integrated Intel
mounting bracket (Figure 1).
> Install the AMD sTRX4 bracket
by pushing both sides into the slot
on the pump until secure (Figure 2).
Note: It is important that the
AMD sTRX4 retention bracket
be evenly secured on all sides
before installation.
> Attach the provided AMD sTRX4
standoffs to the CPU socket.
> Tighten all four screws until
firmly secure.
2. INSTALLING THE AMD sTRX4 STANDOFF SCREWS
9
ENGLISH
Please continue to Page 10 to continue your installation.
L
M
N
K
F
ENGLISH
3. INSTALL THE FANS AND RADIATOR
Attach the radiator and the fans
as shown. For the best cooling
performance, we recommend mounting
the fans as an air-intake
to your PC case.
> Align the bracket and pump over the
standoff screws as shown.
> Attach the thumbscrews (F) to the
standoff screws as shown.
> Tighten the thumbscrews until all
four corners are firmly secured.
4. INSTALLING THE PUMP UNIT
ENGLISH
10
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
3-PIN
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
65 4 3 2 1
65 4 3 2 1
RGB HUB
FANS
Figure 1 Figure 2 Figure 3
ENGLISH
CONNECT FANS AND PUMP TO COMMANDER CORE
CONNECT COMMANDER CORE AND ELITE LCD XT MODULE TO
USB 2.0 HEADER AND POWER
> Connect pump 24-pin cable to your Commander CORE (Figure 1).
> Connect pump tach cable to the CPU_FAN header on your motherboard (Figure 2).
> Connect each fan to the Commander CORE (Figure 3).
> Connect each fan RGB lead to the Commander CORE (Figure 3).
> Using the attached USB cable, connect the Commander CORE to a motherboard
USB 2.0 header.
> Connect pump power cable to an available SATA power plug from your power supply.
> Use included USB Y-Spiltter to reduce required USB ports from 2x to 1x.
11
FAQ
1. How do I know the direction of the airflow of the fan?
An arrow located on the side of the fan indicates the direction of airflow.
2. Can I reuse the pre-applied thermal paste on the cooler for re-installation?
Re-installation of the cooler will require you to clean off the pre-applied thermal paste and
re-apply the XTM70 thermal paste (sold separately).
3. What orientation should I install my radiator?
The best way to install a radiator is with the tubes on the bottom of the case, though you can
install it with the tubes in any position, including an inverted radiator, as long as the highest point
in the radiator is visibly higher than the CPU pump.
4. My cooler and fans are blinking red or not functioning. What do I do?
Please double check all connections from the cooler and fans to the Commander CORE.
Ensure that the Commander CORE and LCD module are update to the most recent firmware
via iCUE. If this does not resolve your problems, please open a ticket at support.corsair.com or
contact our customer support team for further troubleshooting and assistance.
https://help.corsair.com/hc/en-us/requests/new
5. What should I do if my cooler backplate feels loose after installation?
It is common for your cooler backplate to feel loose after you install it into your motherboard for
the first time. Once you have seated and tightened down the cooler pump, it will pull the
backplate to the motherboard and apply pressure on the socket via the cooler.
IMPORTANT: Do NOT, under any circumstances, add additional washers and spacers to
your backplate to decrease play in the backplate. Doing so will increase the mounting
pressure to the retention kit and potentially damage your retention kit, motherboard, or
socket.
ENGLISH
5
•
A
R
E
A
P
P
L
I
C
A
B
L
E
•
L
O
C
A
L
C
O
U
N
T
R
Y
R
E
G
U
L
A
T
I
O
N
S
© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are
registered trademarks of CORSAIR in the United States and/or other countries. All other
trademarks are the property of their respective owners. Product may vary slightly from
those pictured.
49-002654 AA
Warranty: corsair.com/support/warranty
Phone: (888) 222-4346
Web: corsair.com Support: support.corsair.com
Blog: corsair.com/blog
Forum: forum.corsair.com
YouTube: youtube.com/corsairhowto
R-R-CSI-RWF0048
R-R-CSI-RWF0070
R-R-CSI-RWF0077
R-R-CSI-RWF0078
R-R-CSI-RWF0085
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
The Corsair iCUE H100i is an extreme performance LCD liquid CPU cooler that provides powerful cooling and customizable aesthetics for your gaming PC. With its vivid 2.1-inch IPS LCD display, you can monitor system performance, temperatures, and adjust settings on the fly. The cooler features two 120mm AF RGB ELITE PWM fans that deliver exceptional airflow and static pressure, ensuring optimal cooling. It also comes with a Commander CORE XT controller that allows you to control fan speeds, lighting effects, and LCD display content.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Corsair iCUE Elite Capellix High Performance RGB Liquid CPU Cooler User manual
-
-
-
-
-
-
-
Other documents
-
Cooler Master 240 ATMOS ARGB Masterliquid User manual
-
ekwb EK-Classic Kit P240 D-RGB Installation guide
-
ekwb EK-KIT RGB 360 Installation guide
-
ekwb EK-Quantum Velocity² Installation guide
-
ekwb EK-KIT S280 Installation guide
-
EK Water Blocks AM5 User manual
-
NZXT Kraken Elite 360 User manual
-
ekwb EK-SF3D Inflection Point EVO Installation guide
-
Bitspower BPTA-CPUMS-SKI Installation guide
-
Bitspower BPM-CYAIO240-FO Installation guide
