Blaupunkt amsterdam tcm 127 User manual

Brand: Blaupunkt

Model: amsterdam tcm 127

Category: Car media receivers

Type: User manual

This manual is also suitable for

Amsterdam TCM 127

Radiophone / Cassette

Operating instructions

Amsterdam d 1 12.08.1999, 7:13 Uhr1

1819

Remote control RCT 07 (optional)

Amsterdam d 1 12.08.1999, 7:14 Uhr2

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

Contents Radio, Cassette, Changer (Option)

Quick reference ............................ 73

Select operating mode................. 79

Audio mode........................................... 79

Radio operation with RDS ........... 79

AF - Alternative Frequency................... 79

REG - regional programme .................. 79

Selecting a waveband .......................... 80

Station tuning........................................ 80

Seek tuning

/ ............................... 80

Manual tuning with << / >>................ 80

Entering the frequency directly............. 80

Scrolling through the broadcasting

networks (FM only) ............................... 81

Storing radio stations............................ 81

Automatically storing the stations with

the strongest reception using

Travelstore............................................ 81

Recalling stored radio stations ............. 82

Selecting the seek-tuning sensitivity .... 82

Switching from stereo to mono

FM only) ................................................ 82

Traffic programme station

reception with RDS-EON ............. 83

Switching traffic announcement

priority on/off ......................................... 83

Adjusting the volume for traffic

announcements and the beep tone .. 83

Important information.................. 67

Safety standards................................... 67

General information .............................. 67

Effects of radio frequency energy ..... 67

Safety information................................. 67

Traffic safety...................................... 67

Using the telephone while driving ..... 67

Using the telephone in critical areas. 68

Emergency calls ................................ 68

Installation............................................. 68

Notes on connecting a CD changer,

an amplifier or the infrared remote

control:............................................... 69

Accessories .......................................... 69

KeyCard and SIM card ................. 70

Basic information .................................. 70

Second KeyCard/SIM card ............... 70

Wrong KeyCard................................. 70

Starting up the Radiophone.................. 70

Resuming equipment operation after

the power has been disconnected ... 70

Selecting the language for the display71

Removing the KeyCard/SIM card......... 71

Train KeyCard/SIM cards ..................... 71

DSC learn mode ................................... 72

Displaying the radio pass data ............. 72

Optical warning of anti-theft

protection .............................................. 72

Care of your KeyCard/SIM-Card .......... 72

Beep tone ............................................. 83

Switching off the beep tone............... 83

Automatic seek-tuning start.................. 83

Operating the cassette deck ....... 84

Inserting the cassette ........................... 84

Ejecting the cassette ............................ 84

Fast forward/rewind .............................. 84

Selecting titles with S-CPS................... 84

Changing the track (Autoreverse) ........ 84

Tape equalisation ................................. 85

Dolby B NR*.......................................... 85

Listening to the radio while fast

forwarding/rewinding the tape with RM

(Radio Monitor) ..................................... 85

Care instructions................................... 85

CD changer operation (optional) 86

Switching CD changer operation on..... 86

Selecting the CD and the track ............ 86

MIX........................................................ 86

Programming with DSC ............... 87

Overview of the DSC default

settings.................................................. 91

Contents Telephone

Operating the telephone.............. 94

General information .............................. 94

Emergency calls ................................ 94

PIN code

(Personal Identification Number).......... 94

Inserting the SIM card/

entering your PIN code......................... 94

Reactivating the SIM card .................... 94

Making your first telephone call............ 95

GSM emergency calls .......................... 95

Quick reference ............................ 96

Using the telephone..................... 99

GSM network service area ................... 99

Switching to telephone mode ............... 99

Dialling a telephone number................. 99

Manual .................................................. 99

Using speed-dialling . . . ..................... 100

. . . directly from the memory bank: 100

. . . directly from the SIM card

memory bank: ........................... 100

. . . from the telephone book ........... 100

Redial function .................................... 100

Automatic ........................................ 100

Manual............................................. 100

Answering/ending a call ..................... 101

Call waiting (2nd caller) ...................... 101

Broker’s call/hold ................................ 101

Conference calls................................. 102

Making telephone calls using the

handset (special accessory)............... 102

Phone book menu ...................... 103

How to enter a name/text ................... 104

Start the entry.................................. 104

Entering letters/characters .............. 104

Capital and small letters.................. 104

Moving the cursor in the entry

text box ............................................ 104

Inserting characters......................... 104

Deleting characters ......................... 104

Finding an entry by name................... 105

Show my phone number..................... 106

Prevent access ................................... 106

Check capacity ................................... 106

Add entry ............................................ 107

Finding an entry by position ............... 107

Programming with DSC ............. 108

Programming in the setup menu .... 109

Ringing tone volume ....................... 110

Hands-free volume.......................... 110

Handset volume .............................. 110

Automatic answer............................ 110

Automatic redial .............................. 110

Operating mode............................... 110

Extended menu ............................... 110

Ringing tone .................................... 111

SMS tone......................................... 111

My phone number ........................... 111

Call meter format............................. 111

AOC parameters (Advice of Charge) 111

Set charge parameters.................... 112

Audible call timer............................. 112

PIN code.......................................... 112

Alter access code............................ 113

Master clear..................................... 113

External alarm ................................. 113

Hands-free channel......................... 114

TA during call .................................. 114

Overview of the basic factory

settings in the set-up menu............. 114

Programming in the Call Menu ....... 115

Call mailbox..................................... 116

Received SMS messages ............... 116

Selecting the message.................... 116

Reading messages ......................... 116

Clearing messages ......................... 116

Sending SMS messages................. 117

Network selection............................ 118

Cell Broadcast ................................. 119

Call meters ...................................... 120

Call forwarding ................................ 120

Call barring ...................................... 120

Phone lock....................................... 121

Fixed dial numbers.......................... 121

Closed user group........................... 122

Overview of the basic factory settings

in the call menu .................................. 122

Glossary...................................... 123

Specifications............................. 124

Blaupunkt telephone help line ............ 125

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

Effects of radio frequency energy

Your Radiophone is both a transmitter and

a receiver. It generates minimum amounts

of energy in the radio frequency range. While

it is in use, the GSM system keeps a con-

stant check on both the frequency and the

power.

Warnings that using mobile telephones may

be hazardous to your health have recently

been a topic of public discussion. For years

now, research on the effects of radio fre-

quency energy emitted by FM technology

has concentrated on possible adverse ef-

fects to your health. Scientists have also

begun researching the latest radio technol-

ogies such as GSM. According to the re-

search results and by complying with the

corresponding safety standards, it is safe to

say that this product can be used without

reservations.

When the Radiophone is installed properly

in your vehicle, using it is even safer than

using a portable cellular phone.

If you should still be concerned about the

effects of radio frequency energy, there is a

lot you can do personally to ensure that you

are exposed to a minimum of these radio

waves. Of course, it will help to reduce your

call time to a minimum but it is especially

important to heed the following tips on us-

ing this equipment.

Important information

Safety standards

The mobile telephone has been manufac-

tured in accordance with all of the applica-

ble RF safety standards and recommenda-

tions determined by the government offices

and organisations responsible (e.g. the VDE

standard DIN-0848).

General information

The telephone function of your Radiophone

is based on the GSM radio telephone stand-

ard. This standard was developed for use

in Europe and many other countries.

Using the mobile Radiophone, you can

make the same telephone calls as you can

with a cellular phone.

This assumes that the GSM radio network

is available at your location and that you

have access privileges and a valid SIM card.

This SIM card must be inserted into the unit

(if necessary, refer to the information in the

section on “KeyCard and SIM card”).

Safety information

Traffic safety

Traffic safety always has the highest priori-

ty. As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times. Never use your car

radio in a way that could distract you.

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of only

50 km/h.

Should the traffic situation become particu-

larly demanding, we advise you not to use

the radio.

Always make sure that you are still able to

hear any warning signals coming from out-

side of your vehicle, such as police or fire

engine sirens, so that you can react accord-

ingly.

Consequently, you should always select a

moderate volume for playing your car radio

while you are driving.

Using the telephone while driving

Please observe all laws and regulations re-

garding the use to mobile telephones in

motor vehicles.

• Concentrate fully on your driving.

• Stop at a safe place before using the

telephone.

Reactivate the telephone:

• Press

briefly.

Emergency calls

As with every other mobile telephone, the

Radiophone operates using a combination

of mobile radio and cross-country networks,

radio signals and functions programmed by

the user. As a result, there is no guarantee

that your call will always go through. Never

depend exclusively on a mobile telephone

or similar equipment under life-threatening

circumstances (e.g. in medical emergen-

cies).

The telephone interface of the Radiophone

is only able to make and receive calls when

it is activated and located in an area served

by the radio network and when the signal is

strong enough.

Emergency calls may not be possible on all

mobile telephone networks or only if certain

network services and/or certain performance

features are active. Contact the local net-

work operators for more detailed informa-

tion.

Under certain circumstances, some net-

works require that a valid SIM card is in-

serted into the unit.

In the event that certain functions (incom-

ing call barring, call number barring, closed

• If otherwise unavoidable:

Use only hands-free operation if you

have to use the telephone while you

are driving.

Traffic safety always has the highest priori-

ty.

Using the telephone in critical areas

Always switch off the mobile telephone in

areas where it is forbidden to use a mobile

telephone or if this equipment could cause

electromagnetic interference or otherwise

dangerous situations.

Using the telephone can result in interfer-

ence with the correct functioning of medical

equipment which is not sufficiently shield-

ed, particularly near the antenna. Please

consult a doctor or the manufacturer of the

medical device if you have any questions.

Other electronic equipment can also be af-

fected by electromagnetic interference.

If you are in an area where there is danger

of explosion, e.g. petrol stations, chemical

factories or other places where blasting work

is being done, switch your telephone off.

Switching off the telephone:

• Press

for approx. 2 seconds.

“TELEPHONE OFF” will appear in the dis-

play.

user group, AOC, system barring, keypad

barring, etc.) are activated, it may be nec-

essary to deactivate them before placing an

emergency call.

Please read this instruction manual for fur-

ther information and consult your local net-

work operator.

When placing an emergency call, be sure

to supply all the necessary information as

accurately as possible. Remember that your

mobile telephone may be the only means of

communication at the scene of an accident.

Do not hang up until you are told to do so.

Also read the information in the section on

“Telephone operation – GSM emergency

calls”.

Installation

Have the Radiophone installed in your ve-

hicle and serviced by a trained service tech-

nician only. Faulty installation or servicing

can be dangerous and will result in the ex-

piry of your guarantee.

If the vehicle is not adequately shielded

against radio frequency signals, electronic

fuel injection systems, electronic ABS sys-

tems, electronic cruise control systems or

other electronic equipment may experience

malfunctions.

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

This equipment must not be operated with-

out a suitable externally mounted GSM or

combination antenna. The equipment includ-

ing the GSM or combination antenna must

be installed by an authorised Bosch service

centre only.

To ensure trouble-free operation, the posi-

tive power supply line must be connected

via the ignition and the permanent +12 V

lead.

Do not ground the speaker outputs!

Notes on connecting a CD changer, an

amplifier or the infrared remote control:

If installation conditions are unfavourable,

connecting such accessories as a CD

changer, an amplifier or infrared remote

control may, in rare cases, lead to interfer-

ence with the operation of the telephone.

This may result in interference noise, dete-

rioration of transmission quality or connec-

tions being cut off. In this case, please check

the wiring or contact one of our authorised

service centres.

Accessories

Use Blaupunkt-approved accessories and

spare parts only.

You can use the following Blaupunkt prod-

ucts with this car radio:

Changer:

CDC A06 oder A 072 (direkt)

Remote control:

Using the infrared remote control RCT 07

7 607 570 510 you can conveniently control

all of the most important functions of your

Radiophone from the steering wheel.

The operating functions are described in the

Quick References.

Handset

Using the Blaupunkt handset 7 607 570 512

it is possible to place telephone calls with or

without the hands-free function.

The system will switch automatically from

hands-free to handset operation when the

handset is removed from the cradle.

Warning:

There is a relatively strong magnet built into

the handset.

Keep away anything which will react to mag-

netic influence, e.g. diskettes, bank cards,

etc. Important data may be deleted.

Amplifier:

All Blaupunkt amplifiers.

If you attempt to insert a different kind of

card (e.g. telephone or credit card), “CHECK

KEYCARD” or “PRÜFE KEYCARD” will ap-

pear in the display for approx. 2 sec.

Remove the wrong card and replace it with

a valid KeyCard or SIM card.

Starting up the Radiophone

• Switch the unit on (press 1).

Important!

The Card tongue must protrude - then

insert the KeyCard included with the

Radiophone into the slot with the con-

tact surface facing up.

Do not try to insert the KeyCard when

the tongue is retracted as this may

damage the KeyCard mechanism.

The Radiophone is now ready for operation.

Resuming equipment operation after

the power has been disconnected

If the Radiophone is disconnected from the

battery (e.g. during repairs) and then recon-

nected, a trained KeyCard or the master SIM

card is required to resume equipment oper-

ation and to reactivate the other trained SIM

cards.

Second KeyCard/SIM card

If you use a second KeyCard or a SIM card,

the settings will be transferred from the first

KeyCard.

It is possible to store the following functions

as personal settings on the second Key-

Card:

Station presets, treble, bass, balance and

fader, Loudness on/off, TA (traffic an-

nouncement volume), VOLUME FIX.

The two KeyCards and the first two SIM

cards will store the last setting selected for

the waveband, bass/treble, fader/balance,

station settings, station presets, VOLUME

FIX.

When you insert your KeyCard or one of the

first two SIM cards, you will find that the

equipment switches onto the basic settings

you have already programmed.

Wrong KeyCard

If a KeyCard from another radio is inserted

into the unit, “KEYCARD ERROR” will ap-

pear in the display. Please do not try to op-

erate the equipment.

After approx. 8 sec. the radio will switch off

automatically.

If the wrong KeyCard is inserted four times,

the waiting time will increase to one hour.

KeyCard and SIM card

KeyCard

Basic information

One KeyCard is included with the Radio-

phone.

The car radio can also be operated with a

second “trained” KeyCard or with one of up

to 30 trainable SIM cards.

Using the KeyCard it is possible to activate

the following operating modes:

Radio, tape deck, CD changer (optional),

AUX, telephone emergency call.

Using the SIM card it is possible to activate

all operating modes.

The SIM card also incorporates the anti-theft

functions.

If necessary (in the event of loss or dam-

age), it is possible to purchase a KeyCard

or SIM card from an authorised dealer.

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

a) Training or deleting the KeyCard/

SIM card with DSC

DSC – LEARN CARD

One KeyCard or up to 30 SIM cards

can be trained or replaced as addition-

al cards.

• Insert the first KeyCard (included

with the Radiophone) into the unit

and switch the unit on.

• Press DSC/OK and press

/ to

select “LEARN CARD”.

• Press DSC/OK briefly.

“CHANGE CARD” will appear in the

display.

• Remove the first KeyCard and in-

sert the new card (KeyCard or SIM

card).

After insertion of a SIM card only: The

display shows “NAME?”.

If you wish, you can now enter a name

of up to 8 characters.

If necessary, refer to the section on

“How to enter a name/text”.

• Press DSC/OK.

• Enter the PIN code and press DSC/

OK.

After “CODE OK”, the display will

show, for example, “SIM CARD 23 AC-

Selecting the language for the display

At the factory the texts for the display are

set to English.

You can display the texts in other languag-

es if you wish.

• Press DSC/OK.

• Press

/ until “LANGUAGE” appears

in the display.

• Press DSC/OK and << / >> to select

the language.

• Press DSC/OK and CL one after the

other.

Removing the KeyCard/SIM card

Never forcibly pull out the card!

You may destroy it.

• First push the card in gently towards

the unit.

The KeyCard/SIM card will eject slightly so

that you can remove it.

• Remove the card.

When you remove the card for the first time,

“LEARN CARD” will appear in the display.

Now you can train additional cards (refer to

“Train SIM cards”).

After this process has ended, the Radio-

phone will switch off when the card has been

removed.

Train KeyCard/SIM cards

In the initial programming process you can

easily train the second KeyCard and up to

30 SIM cards.

In order to do this the Radiophone must be

switched on and the original KeyCard insert-

ed.

• Remove the original KeyCard and in-

sert the first SIM card.

“NAME?“ will appear in the display.

If you like, you can enter a name of up to 8

characters. Please refer to “How to enter a

name/text”.

If you would like to skip this function or after

you have entered the name:

• Press OK.

The first SIM card has been programmed.

“TERMINATE? PRESS OK” will appear in

the display. Now you can programme addi-

tional cards.

To finish the programming process:

• Press OK.

The SIM card trained first assumes the ad-

ditional function of master SIM card. Other

SIM cards can only be trained using either

the master SIM card or the KeyCard.

There are two basic ways in which you can

train other SIM cards:

CEPTED” (i.e. the 23rd SIM card has

been trained).

The Radiophone can now be operated

using the new cards.

A maximum of two KeyCards and 30

SIM cards can be trained in this way.

If you attempt to program a third Key-

Card, the KeyCard which was not part

of the programming process will auto-

matically become invalid.

If 30 SIM cards have been pro-

grammed, it will be necessary to delete

old access authorizations before new

cards can be trained.

b) Training new cards after removing

the KeyCard or master SIM card

If this function is activated in the DSC

learn mode, it is possible to train an-

other SIM card each time the KeyCard/

master SIM card is removed. This

function is useful if you want to train

several cards one after the other (fleet

management).

c) Deleting SIM card authorisations

The authorisation for SIM cards can be

deleted using the CARD LIST in the

DSC menu. The master SIM card can

be deleted with a KeyCard only.

DSC learn mode

With this function you can select whether

you want to train additional SIM cards using

the DSC menu only or each time after re-

moving the KeyCard or the master SIM card

as well.

For operating instructions refer to “Program-

ming with DSC – LEARN MODE”.

Displaying the radio pass data

Using the KeyCard supplied with your set

you can have the radio pass data such as

the model name, product number (7 6...) and

serial number indicated in the display.

Please refer to the section on “Programming

with DSC – READ KEYCARD”.

Optical warning of anti-theft

protection

KeyCard tongue flashes

When the vehicle has been parked and the

KeyCard or SIM card removed, the KeyCard

tongue can be switched to flash to provide

additional anti-theft protection.

For this function to operate properly it is

necessary that the positive power supply line

and the permanent +12 V lead are connect-

ed as described in the installation instruc-

tions.

Be sure that “KEYCARD LED ON” has been

selected in the DSC mode.

If necessary, refer to the section on “Pro-

gramming with DSC – KEYCARD LED”.

Switching off the flashing light

The flashing light can be switched off by

pushing in the KeyCard tongue gently until

it locks.

If you would like to deactivate the flashing

tongue altogether, select the “KEYCARD

LED OFF” item in the DSC menu:

Care of your KeyCard/SIM-Card

In order to ensure that the card always func-

tions correctly, the contacts must be free of

any foreign particles. Avoid direct skin con-

tact.

Do not subject the cards to direct sunlight.

If necessary, clean the card contacts using

a cotton swab dipped in rubbing alcohol.

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

Switching the unit on/off via the ig-

nition:

If the equipment has been connected

properly, it can be switched on and off

with the vehicle ignition.

When the ignition has been switched

off, the unit will emit a double beep to

remind you to remove the KeyCard/

SIM card before leaving your vehicle.

If you switch off the ignition during a

telephone call, the Radiophone will re-

main switched on until you have com-

pleted the call.

Switching the radio on when the ig-

nition is switched off

When the ignition is switched off (card

is inserted) the equipment will continue

to function as follows:

After you hear the double beep, press

the knob. The equipment will switch

back on. After one hour’s playing time,

the Radiophone will switch off auto-

matically to prevent the car battery

from going dead.

Operation in combination with an

ignition timer

If the ignition timer has been activated

in the DSC mode, the Radiophone will

switch off as programmed after the ig-

nition is switched off (refer to the sec-

tion on “Programming with DSC - IGNI-

TION TIMER”.

Altering the volume

Turn the knob to alter the volume. The

setting will appear in the display.

When the Radiophone is switched on,

it will play at a preset volume (VOL-

UME FIX).

VOLUME FIX can be altered as de-

sired (refer to “Programming with DSC

- VOLUME FIX”).

The volume can also be altered using

the remote control (optional) by press-

ing V- / V+.

Quick reference for operating the radio, tape deck and CD changer (optional)

1 On/off

Volume

To switch the Radiophone on, press

the knob (volume control).

A valid KeyCard or SIM card must be

inserted in the unit already or within

the next 15 seconds.

Switching the unit on/off with the

KeyCard:

If the equipment has been switched on

by pressing knob 1, then it can be

switched off and on again with the

KeyCard or SIM card.

This assumes that the program has

been switched to “MENU” under

“LEARN MODE” in the DSC menu.

Note:

Be sure to read the information in the

section on “KeyCard/SIM card anti-

theft protection system”.

For more detailed information refer to

“Programming with DSC - LOUD-

NESS”.

3 SRC (Source)

You can switch between the operating

modes for radio, cassette and changer

(option) or an auxiliary unit.

You can switch from the telephone

menu back to the last operating mode

selected.

This assumes that you are not talking

on the telephone or trying to place a

call.

4 TA (Traffic Announcement = priority

for traffic messages)

If “TA” appears in the display, you will

be able to tune into radio stations

which broadcast traffic information

only.

Switch priority on/off: press TA.

5 TS / BND

Switch between the memory levels/

wavebands FM, TS (Travelstore), MW

and LW.

Additional Travelstore function

Store the nine radio stations with the

strongest reception signals using Trav-

elstore: Press BND until you hear a

beep or until “TRAVELSTORE” ap-

pears in the display.

Dolby B NR*

Cassettes recorded with Dolby B NR

will be played back in the best quality

possible if “DOLBY” appears in the

second line.

* Noise reduction system manufactured under li-

cence by Dolby Laboratories. The word Dolby

and the double-D symbol are trademarks of Dol-

by Laboratories.

Eject cassette

Press the button until the cassette

ejects.

Track switch

Press the button briefly to switch cas-

sette playback to the other track (side)

of the tape.

/ AUD

Press AUD once:

Alter treble and bass settings using the

rocker switch.

Treble +

Treble –

Bass –

Bass +

Press AUD twice:

Alter balance (left/right) and fader

(front/rear) settings.

Fader front

Fader rear

Balance left

Balance right

The settings will be indicated in the

display. The last setting made will be

stored automatically.

Switch off AUD: Press AUD for a third

time.

If no changes are made for a period of

8 seconds, the AUD setting will end

automatically.

Switching Loudness on/off:

Press AUD for approx. 1 sec. (beep).

The current setting will appear briefly

in the display (ON/OFF).

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

8 Cassette loading slot

Insert the cassette (side A or 1 facing

up, open side to the right).

9 Selection buttons

Radio mode

Entering the frequency directly

You can enter an FM frequency direct-

ly using the selection buttons:

First press “0” and then enter the de-

sired frequency, starting with the first

digit. It is only possible to enter fre-

quencies between 87.5 and 108. Omit

the decimal point in the entry. Press

CL to abort the entry, press OK to con-

firm the entry. Once all of the digits

have been entered, the entry will be

confirmed automatically.

Storing radio stations

You can use the buttons to store the

following number of radio stations for

the different wavebands:

FM 19

TS (FM-Travelstore) 9

MW 9

LW 9

To store – During radio operation

press one of the selection presets until

you hear a beep. If you want to store

the station on a two-digit preset, first

press “1” and then press the second

digit within 2 sec. until you hear a

beep.

Recalling stored radio stations – Se-

lect the desired waveband (select “FM”

or “TS” in the FM range) and press the

corresponding button.

Activate the presets from 10 to 19 by

pressing “1” briefly first and then

pressing the second button within two

seconds.

Tape mode

It is possible to set or correct the

number of titles to be skipped for S-

CPS (Super Cassette Program

Search) or fast forward.

CD changer mode (optional)

CDs 1 to 10 can be selected directly

(0 = CD 10).

: AF / #

Alternative Frequency for RDS opera-

tion: When “AF” appears in the display

the radio will automatically use RDS to

find for the best reception frequency

for the programme you are listening to.

Switching AF on/off: Press AF briefly.

Switching the regional function on/off:

Press AF for approx. 2 seconds

(beep), “REGIONAL ON” or “REGION-

AL OFF” will appear briefly in the first

line in the display.

When the regional function is switched

on “REG” will appear in the display on

the right.

; + / 0

Press this button before you enter a

radio station frequency directly.

= MIX /

Radio operation

Switch seek-tuning sensitivity:

Press button briefly.

If “lo” is displayed, the radio will only

pick up strong, local stations (normal

sensitivity).

If “lo” does not light up, the radio will

also pick up weaker, more distant sta-

tions (high sensitivity).

CD changer operation (optional)

MIX CD

The tracks of a CD will be played back

in random order.

The following CDs will also be selected

at random.

MIX OFF

The MIX function is switched off.

Press MIX until the desired function

appears in the display.

g) lo - Seek tuning sensitivity

h) 19/T9 - Indicates on which button

the station currently play-

ing is stored (1-19)/Trav-

elstore (1-9)

i) - Call forwarding is active

j) - Indicates that a SMS

message is stored

k) - Also appears when a

voice message has been

received

l) - Connection with GSM

radio network

m) - GSM field strength indi-

cator

n) AF - Alternative frequency for

RDS

o) DOLBY - Dolby B NR

p) MTL - Metal or CrO

cassettes

are currently playing

q) RM - Radio Monitor (listen to

radio during tape fast for-

ward or rewind)

r) T: 11 - CD track number

s) 02 . 32 - CD time (time played)

t) MIX - CD track random play

> Display

Radio operation

fhg

Cassette operation

p q

Changer operation (optional)

a) NDR1 NDS - Station name

b) Side 2 - Side 2 of the cassette

c) CD 02 - CD number

d) FM - Radio waveband

e) TP - Radio station broadcast-

ing traffic information (is

currently being received)

f) TA - Traffic announcement pri-

ority

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

@ Rocker switch

Radio operation

/ Seek tuning

Upwards

Downwards

<< / >> Up or down in increments

(for FM only when AF is switched

off)

For FM only:

<< / >> Scroll through the station broad-

casting network when AF is

switched on

e.g. NDR 1, 2, 3, 4, N-JOY.

Tape operation

Fast forward

Fast rewind

/ Select title (S-CPS)

Forwards

Back

Stop this function by pressing or

the opposite button.

? Anti-theft card protection system

In order to operate the radio equip-

ment it is necessary to first insert the

KeyCard included with the unit or a

KeyCard you have trained accordingly

or a programmed SIM card.

KeyCard

Please read the information in the sec-

tion on “Anti-theft card protection sys-

tem” carefully.

Flashing card tongue

If the radio has been switched off and

the KeyCard or SIM card removed, the

card tongue will flash as additional

theft protection if the corresponding

setting has been activated.

For more detailed information, please

refer to “Programming with DSC”.

It is possible to switch off the flashing

light by pressing the card tongue in

gently until it locks into place.

CD changer operation (optional)

Select CD

Down

Select track

Up: Press briefly.

CUE - fast forward (audible): Hold

button pressed down.

Down: Press two or more times

one after the other.

Restart the same track: Press

once briefly.

REVIEW - fast reverse (audible):

Hold button pressed down.

Additional rocker switch functions:

Additional settings possible with

AUD 2

DSC mode C

The corresponding function must be

activated.

A ME

Unit:

Telephone functions only.

Remote control:

During radio operation it is possible to

recall stored radio stations in ascend-

ing order.

During CD changer operation, the CDs

are selected in ascending order.

B CL (CLEAR)

Press this button to quit the currently

active menu item in the DSC mode.

Any changes made will not be stored.

Press CL again to quit the DSC mode.

Cancels direct frequency entry.

C DSC / OK

DSC (Direct Software Control)

Use DSC to adjust the programmable

basic settings.

Press to store the altered settings.

Activate DSC: Press the button briefly.

Select function: Press

/ .

Display setting adjustments: Press

DSC/OK.

Alter settings: Press << / >>.

Store: Press OK.

Quit DSC: Press CL.

If you quit DSC by pressing CL before

you press OK, any changes made to

the settings will not be stored.

For more information refer to “Pro-

gramming with DSC”.

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

While searching for the strongest reception

signal, the radio may switch to mute briefly.

If “SEARCH” appears in the display when

switching on the radio or recalling one of the

stored frequencies, the unit is automatically

searching for an alternative frequency.

“SEARCH” will disappear from the display

when the alternative frequency has been

found or after the frequency band has run

through completely.

If the reception quality of the selected pro-

gramme becomes poor:

• Tune into a different station.

REG - regional programme

Certain radio programmes are split up at

times into regional programmes offering lo-

cal information. The 1st programme broad-

cast by NDR, for example, offers pro-

grammes with different contents in the north-

ern states of Germany including Schleswig-

Holstein, Hamburg and Lower Saxony at

certain times of the day.

If you are listening to one regional pro-

gramme and move to an area where anoth-

er linked regional programme becomes

stronger, the unit will switch to that pro-

gramme.

Select operating mode

Audio mode

(Radio, tape deck, CD changer (optional),

auxiliary source)

During audio operation you can use SRC to

switch between radio, cassette and chang-

er (option) or an auxiliary sound source.

When in telephone mode, you can switch

back to the audio source used last by press-

ing SRC.

Telephone operation has priority. As a re-

sult, you cannot switch to audio mode un-

less you are not currently talking on the tele-

phone or trying to place a call.

• Press SRC repeatedly until the func-

tions of the audio source you wish to

listen to appear in the display.

You cannot select tape or CD changer op-

eration unless a cassette/magazine contain-

ing CDs has already been inserted.

If an empty magazine has been inserted,

“NO CD” will appear in the display.

An auxiliary source can only be selected if

a Blaupunkt changer has not been connect-

ed to the system. “AUXILIARY SOURCE

ON” must be set in the DSC menu.

Radio operation with RDS (Radio Data System)

The Radio Data System offers you added

convenience when listening to FM radio sta-

tions.

More and more radio stations have begun

to broadcast RDS information along with

their regular programmes.

As soon as a programme has been identi-

fied, the station name including a regional

identifier, if applicable, will appear in the dis-

play, for example, NDR1 NDS (regional pro-

gramme in Lower Saxony, Germany).

When RDS is activated, the preset buttons

become programme buttons. You now know

exactly which programme you have tuned

into, making it easy to find the desired sta-

tion quickly.

RDS also offers other advantages:

AF - Alternative Frequency

The AF (Alternative Frequency) function

makes sure that the radio always automati-

cally tunes into the strongest frequency of

the currently selected programme.

If this function has been activated “AF” will

appear in the display.

In order to switch this function on or off,

• press AF/# briefly.

Manual tuning:

• Press << / >>; the frequency will

change in degrees in the downwards

or upwards direction.

If you hold down the right or left part of the

rocker switch, the frequency scan will speed

up in the corresponding direction.

Entering the frequency directly

For FM or FMT, it is possible to enter the

station frequency directly.

Start your entry

• by pressing 0.

• Then enter the frequency, beginning

with the first digit. You need not enter

a decimal point.

Press CL to cancel this process or OK to

confirm your selection.

Station tuning

Seek tuning /

• Press / ; the car radio will automati-

cally search for the next station.

If you hold down / (also applies to re-

mote control operation), seek tuning will

speed up in upwards or downwards direc-

tion.

Seek tuning

Down

<< / >> Up/Down in increments (for FM only

when AF is switched off)

Manual tuning with << / >>

You can also tune in a station manually.

Important:

AF must be switched off (i.e. the “AF” or

“REG” symbol does not light up in the dis-

play).

If necessary, deactivate this function:

• Press AF/#.

If you wish to continue listening to the first

programme, switch REGIONAL ON by

• pressing AF/# for approximately 1 sec-

ond until “REGIONAL ON” appears in

the first line.

When the regional function has been

switched on “REG” will replace “AF” in the

display.

If you leave the service area of the regional

programme you are currently tuned into, or

if you would like to take advantage of the

full RDS service, switch to “REGIONAL

OFF”.

• Press AF/# for approximately 1 second

until “REGIONAL OFF” appears.

Selecting a waveband

You can select between the following wave-

bands:

FM 87.5 - 108 MHz

MW 531 - 1602 kHz

LW 153 - 279 kHz

• Use BND to select the waveband.

Press repeatedly if necessary.

DEUTSCH

Radio

Telefon

ENGLISH

Radio

Telephone

Scrolling through the broadcast-

ing networks (FM only)

You can use the << / >> buttons to tune into

stations in your reception area.

If it is possible to receive several pro-

grammes in the same broadcasting network,

you can scroll through them in the forwards

direction by pressing >>, or backwards us-

ing the << button, e.g. NDR 1, 2, 3, 4, N-

JOY.

You must have tuned into these stations at

least once previously and “AF” must be ac-

tive (lights up in the display).

Start Travelstore, for example:

• Press BND for 2 seconds; the system

starts to run through the frequency

band.

If “AF” does not light up,

• press AF/#.

This fulfils the requirements for selecting

stations with << / >>.

Storing radio stations

You can store the following number of sta-

tions on the selection buttons for each of

the individual wavebands:

FM 19

TS (FM-Travelstore) 9

MW 9

LW 9

• Use BND to select the desired wave-

band.

• Select a radio station using the rocker

switch (automatically with

/ or man-

ually with << / >>).

• Press the desired selection button for

approx. 1 sec. until you hear a beep.

If you want to store the radio station on a

two-digit preset,

• press button 1 briefly and the second

button within 2 sec. until you hear a

beep.

You have now stored the radio station.

The station preset will appear in the display.

Note:

If you attempt to store a station which is al-

ready stored, the number of the correspond-

ing selection button and the memory bank

will flash in the display briefly if you are us-

ing the same memory bank.

Automatically storing the

stations with the strongest

reception using Travelstore

You can automatically store the nine most

powerful FM stations of your current recep-

tion area sorted according to their signal

strength. This function is particularly conven-

ient during longer trips.

• Press BND/TS for 2 seconds.

“TRAVELSTORE” will flash in the display.

The nine FM stations with the best recep-

tion will be stored automatically in the FMT

(FM Travelstore) memory bank. When this

procedure has been completed, the radio

will switch to the station with the best re-

ception stored on selection button 1.

If desired, stations can also be stored man-

ually on the Travelstore memory bank (re-

fer to “Storing radio stations”).

Recalling stored radio stations

You can recall any stored radio station at

the touch of a button.

• Press BND/TS repeatedly until the de-

sired waveband appears in the display.

• Press the corresponding selection but-

ton briefly.

If you wish to recall a station stored on a

two-digit preset (e.g. preset 19) first press 1

and then 9 within the next 2 seconds.

Selecting the seek-tuning sensi-

tivity

You can alter the automatic seek-tuning

sensitivity.

If “lo” is displayed, the radio will only pick up

strong, local stations.

If “lo” is switched off, the radio will also pick

up weaker, more distant stations.

To switch the seek tuning sensitivity:

• Press

The sensitivity level can be selected sepa-

rately for both modes. (Please refer to the

section on “Programming with DSC – DX-

LEVEL / LO-LEVEL”).

Switching from stereo to mono

(FM only)

Every time the radio is switched on, stereo

playback will be activated automatically.

The unit will gradually switch to mono if the

reception deteriorates beyond a certain

point.

Page is loading ...

Blaupunkt amsterdam tcm 127 User manual

Brand: Blaupunkt

Model: amsterdam tcm 127

Category: Car media receivers

Type: User manual

This manual is also suitable for

Download PDF

report

Blaupunkt amsterdam tcm 127 User manual

This manual is also suitable for

Blaupunkt amsterdam tcm 127 User manual

Related papers

Other documents