Virtu USA GD-50072-WMSQ-WH-NM Installation guide

Brand
Virtu USA
Model
GD-50072-WMSQ-WH-NM
Type
Installation guide

This manual is also suitable for

SKU: GD-50072
INSTALLATION GUIDE
Prior to installation, please check the items you have received
against the packaging list. Report any missing items to your
local dealed immediately.
Protect all surfaces from sharp objects, high heat sources,
direct prolinged sunlight, and chemical hazards.
PROFESSIONAL INSTALLATION IS RECOMMENDED
Rev. 060120
PARTS LIST (may differ depending on purchase)
~77"
18~27"
TopBasinCabinet Mirror
SKU: GD-50072
INSTALLATION GUIDE
Apply adhesive around the top edges of the cabinet Carefully place the top over the cabinet
Apply sealant around the top edge of
the sink rim. Flip top over and align
basin to cutout. Screw in threaded
bolts to each block. Secure plates with
washer then wing nuts.
Measure desired mirror
height and mark
Measure the distance
between the mirror’s hooks
and make a second mark.
Install screws into stud or use
drywall anchors.
Lift and hang mirror
Align and center
Basin InstallationMirror Installation
Top Installation
SKU: GD-50072
INSTALLATION GUIDE
REQUIRED TOOLS
DRAWER REMOVAL
DOOR ADJUSTMENT
REMOVAL
1. Pull tabs toward center
2. Lift and pull drawer out
RE-INSTALL
1. Align drawer hole with slider stud
2. Push tabs back in to secure
Adjusts the door vertically Adjusts the door horizontally Adjusts the door forward and backwards
Locate the slider tabs on the underside
of the drawer.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Virtu USA GD-50072-WMSQ-WH-NM Installation guide

Brand
Virtu USA
Model
GD-50072-WMSQ-WH-NM
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents