Virtu USA MS-6730-C-WH Installation guide

Type
Installation guide

This manual is also suitable for

SKU: MS-6730
INSTALLATION GUIDE
Prior to installation, please check the items you have received
against the packaging list. Report any missing items to your
local dealed immediately.
Protect all surfaces from sharp objects, high heat sources,
direct prolinged sunlight, and chemical hazards.
PROFESSIONAL INSTALLATION IS RECOMMENDED
Rev. 060120VIRTU
PARTS LIST (may differ depending on purchase)
18~27"
~77"
BasinCabinet Mirror
SKU: MS-6730
INSTALLATION GUIDE
Apply adhesive around the top edges of the cabinet Carefully place the top over the cabinet
Measure desired mirror
height and mark
Measure the distance
between the mirror’s hooks
and make a second mark.
Install screws into stud or use
drywall anchors.
Lift and hang mirror
Align and center
Mirror Installation
Top Installation
SKU: MS-6730
INSTALLATION GUIDE
REQUIRED TOOLS
DRAWER REMOVAL
DOOR ADJUSTMENT
REMOVAL
1. Pull tabs toward center
2. Lift and pull drawer out
RE-INSTALL
1. Align drawer hole with slider stud
2. Push tabs back in to secure
Adjusts the door vertically Adjusts the door horizontally Adjusts the door forward and backwards
Locate the slider tabs on the underside
of the drawer.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Virtu USA MS-6730-C-WH Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI