Seagull Lighting F2964/3SN Installation guide

Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Vintner 3 Light Down Chandelier
1.1
F2964-3
Chandelier
F2964/3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Place the shade and spacer over the socket, then secure them in place by screwing the shade collar nut onto the socket;
repeat for remaining sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
LAMP
3
1
SHADE
SOCKET
3
SPACER
FIXTURE LOOP
CAUTION - RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
SHADE
COLLAR NUT
2
4
555 Theodore Fremd Ave Suite B101 Rye, NY 10580
800.969.3347
www.Feiss.com
© 2015 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
SAVETHESE INSTRUCTIONS!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Seagull Lighting F2964/3SN Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI