Feiss F3184/3PN Installation guide

Type
Installation guide

Feiss F3184/3PN is a damp-rated luminary with three sockets for E26-base bulbs that can be used in indoor and outdoor applications in places that receive moisture but are protected from the elements such as: under eaves, breezeways, covered patios, and some bathrooms. Please make sure that the canopy is facing down as it protects the sockets from water dripping down. It is an elegant light fixture in a transitional style with traditional and modern elements that would be a perfect addition to a variety of interiors.

Feiss F3184/3PN is a damp-rated luminary with three sockets for E26-base bulbs that can be used in indoor and outdoor applications in places that receive moisture but are protected from the elements such as: under eaves, breezeways, covered patios, and some bathrooms. Please make sure that the canopy is facing down as it protects the sockets from water dripping down. It is an elegant light fixture in a transitional style with traditional and modern elements that would be a perfect addition to a variety of interiors.

1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
1
2
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
4
5
Rubin 3 Light Chandelier
1.0
F3184-3
Chandelier
F3184/3
LAMP
MOUNTING PLATE
7
COLLAR NUT
SHADE
SHADE TOOL
SOCKET
10
CORD
CANOPY
CORD CLIP
CLIP SCREW
2
3
Determine the wanted height of the fixture by feeding the cord through the canopy and moving the cord up or down.
Place the cord in between the two cord clips and secure it in place using the clip screws.
Trim the cord leaving enough for electrical connections. From the end of the cord, strip the insulation 4” and then strip the end of the
wires. Repeat for remaining cords.Note: Make sure not to nick the inner wires.
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wires (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wires (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the threaded nipple, and secure it in place by screwing the cap nut
onto the threaded nipple
Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket using the shade tool. Repeat for
remaining shades.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Optional: Use enclosed instructions for Swag Hook installation.
THREADED NIPPLE
CAP NUT
JUNCTION BOX
SWAG HOOK
6
7
8
9
10
11
11
6
8
9
CANOPY
4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.969.3347
www.Feiss.com
© 2017 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss F3184/3PN Installation guide

Type
Installation guide

Feiss F3184/3PN is a damp-rated luminary with three sockets for E26-base bulbs that can be used in indoor and outdoor applications in places that receive moisture but are protected from the elements such as: under eaves, breezeways, covered patios, and some bathrooms. Please make sure that the canopy is facing down as it protects the sockets from water dripping down. It is an elegant light fixture in a transitional style with traditional and modern elements that would be a perfect addition to a variety of interiors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI