Prestigio Multirunner 700x Owner's manual

Brand: Prestigio

Model: Multirunner 700x

Category: Dashcam

Type: Owner's manual

This manual is also suitable for

RoadRunner 700X - PCDVRR700X

Prestigio Multirunner 700x is a portable car video recorder that allows you to capture and save videos, photos, and audio recordings. With its compact design and range of mounting options, it's perfect for use in your car, on your bike, or even while hiking or camping. The device features a built-in TFT display screen for easy viewing and playback of your recordings, and it also supports voice control for hands-free operation.

User Manual

www.prestigio.com

Version 1.0

RoadRunner 700X

PCDVRR700X

Portable Car Video Recorder

About this user manual

This user manual is specially designed to detail the device’s functions and features.

- Please read this manual before using the device to ensure safe and proper use.

- Descriptions are based on the device’s default settings.

- Prestigio continuously strives to improve its products. Due to software upgrading, some

contents in this user manual may be different from your product. Prestigio reserves the rights

to revise this user manual or withdraw it at any time without prior notice. Please take your

product as standard.

Conventions used in this manual

In this user manual, we use the following symbols to indicate useful and important information:

Caution: provides safety precaution and important information.

Note: gives additional information.

Tips: usage tips.

Contents

1. Unboxing ......................................................................................................................... 1

Open your package ................................................................................................................. 1

Your DVR at a glance ............................................................................................................... 2

Remote control ....................................................................................................................... 3

2. Getting started ................................................................................................................. 4

Insert a memory card .............................................................................................................. 4

Insert the battery .................................................................................................................... 4

Replace the cover .................................................................................................................... 5

Install the TFT display screen ..................................................................................................5

Use the waterproof case ......................................................................................................... 6

Mount your DVR ..................................................................................................................... 6

Power on your DVR ................................................................................................................. 7

3. Basics ............................................................................................................................... 8

Charge the battery .................................................................................................................. 8

Connect to your PC ................................................................................................................. 8

Connect to your TV or Monitor ............................................................................................... 9

Status icons on the segment screen .......................................................................................9

4. Video record .................................................................................................................. 10

Camcorder settings ...............................................................................................................10

Record videos ........................................................................................................................ 10

Start recording by voice control ............................................................................................10

5. Photo capture ............................................................................................................... 11

Camera settings .................................................................................................................... 11

Take a photo ......................................................................................................................... 11

Take continuous shots ..........................................................................................................11

Take a photo of yourself .......................................................................................................11

6. Vioce Record .................................................................................................................. 12

Record voice .......................................................................................................................... 12

Start recording by voice control ............................................................................................12

7. Multimedia .................................................................................................................... 13

Watch a video ....................................................................................................................... 13

Listen to a voice .................................................................................................................... 13

View your photos .................................................................................................................. 13

Start a slideshow ................................................................................................................... 13

8. File management ........................................................................................................... 14

Delete a file ........................................................................................................................... 14

Delete all files ........................................................................................................................ 14

Protect your file .................................................................................................................... 14

Set DPOF for photos ..............................................................................................................14

9. Settings .......................................................................................................................... 16

Set up your DVR .................................................................................................................... 16

Set up options .......................................................................................................................16

10. Specifications ................................................................................................................. 17

11. Troubleshooting ............................................................................................................. 18

12. Safety precautions ......................................................................................................... 19

USER MANUAL RoadRunner PCDVRR700X

1. Unboxing

Open your package

• Prestigio DVR

• Car charger •Suction mount

•Bicycle bracket

•Pouch •Remote control

•Waterproof case

•Bracket

•Lanyard

•Anti-slide pad

•Accessory for flat installation

•Micro SD card •Rechargeable battery •CD ROM

•Quick start guide •HDMI cable •Warranty card

•USB cable •AV cable •Adapter

USER MANUAL RoadRunner PCDVRR700X

Your DVR at a glance

LCD segment screen

Power switch

Capture button

VOX switch

Working/charging indicator

Buzzer

Micro SD card slot

Right button

OK button

Mini USB port

Push to remove screen

Lanyard hole

Record button

Recording indicator

Microphone

TFT display screen

Menu button

Up button

Left button

Down button

Recall button

Camera lens

Laser trasmitter

AV output port

HDMI port

Thread interface

Video recording/

shooting indicator

Buttons

Button Specification

Power switch •Slide to ON to power on your DVR.

•Slide to OFF to power off your DVR.

Record button •Press to start video/voice recording.

VOX switch •Slide to ON to turn on vioce control mode.

•Slide to OFF to turn off vioce control mode.

Capture button •Take photos.

[M] •Enter settings in preview mode.

•Manage your files in playback mode.

[+] •Select the up options.

•Volume up in playback mode.

[-] •Select the down options.

•Volume down in playback mode.

[<] •Select the left or previous options.

[>] •Select the right or next options.

[OK] •Confirm the selection.

•Start or stop video/voice playback.

[ ]

•Enter or exit playback mode.

USER MANUAL RoadRunner PCDVRR700X

Remote control

Record

Capture

Stop

Pair the remote control with your DVR

1. Power off your DVR.

2. Press and hold the Record button on your DVR.

3. Slide the Power switch on your DVR to ON.

4. Release the Record button on your DVR.

5. Press and hold the Record and Stop button on the remote control.

6. After you hearing two beep, the remote control is paired with your DVR.

Use the Remote control

- Press Record button to start recording.

- Press Stop button to stop recording.

- Press Capture button to take photos.

- Press and hold Capture to turn on or off laser transmitter.

USER MANUAL RoadRunner PCDVRR700X

2. Getting started

Congratulations on your purchase and welcome to Prestigio.

To get the most of your product and enjoy all Prestigio has to offer, please

access:

http://www.prestigio.com/catalogue/DVRs

More details about your product, please access:

http://www.prestigio.com/support

Please read the "12. Safety precautions" on page 19 before use.

Insert a memory card

You need to insert a memory card before video recording and taking photos. Depending on the

memory card manufacturer and type, some memory cards may not be compatible with your

device. High-speed Micro SD card is recommended

1. Insert a memory card with the gold-coloured contacts facing downwards.

2. Push the memory card into the slot until it locks in place.

Some memory cards may not be fully compatible with the device. Using a incompatible card

may damage the device or the memory card, or corrupt the data stored in it.

• If there is no memory card detected when your DVR is powered on, the "out of memroy"

will display on the screen.

•Frequent writing and erasing of data shortens the lifespan of memory cards.

Remove the memory card: push the memory card until it disengages from the device, and

then pull it out.

Storage capacity for your reference

Storage

card(G)

H.264

1080P/30fps

H.264

720P/60fps

H.264

720P/30fps

848x480P

(WVGA)

2592 X 1944

(5M)

32G 350min 450min 600min 800min 40000photos

16G 180min 230min 300min 400min 20000photos

8G 90min 120min 150min 200min 10000 photos

4G 45min 60min 70min 100min 5200 photos

Insert the battery

1. Securely hold your DVR. With your finger, remove the back cover.

USER MANUAL RoadRunner PCDVRR700X

• Be careful not to damage your fingernails when you remove the back cover.

•Do not bend or twist the back cover excessively. Doing so may damage the cover.

2. Insert the battery (with its exposed copper contacts first) into the battery compartment.

Please use only original batteries that came in the box or replacements that we recommend

(Lithium battery PLB700).

Replace the cover

1. Align the cover onto the part of your DVR.

2. Push the back cover against your DVR to lock the cover into place.

You will hear a click when the back cover is locked in place.

Install the TFT display screen

1. Align the TFT display screen onto the part of your DVR.

2. Push the screen against your DVR to lock the screen into place.

You will hear a click when the TFT display screen is locked in place.

Remove the TFT display screen

1. Press the PUSH button on your DVR.

2. Remove the TFT display screen from your DVR

USER MANUAL RoadRunner PCDVRR700X

Use the waterproof case

For the waterproof case, the waterproof depth is up to 60 meters and the waterproof grade

is IP68.

1. Remove the display screen from your DVR.

2. Put your DVR to the waterproof case.

3. Push to lock the cover of the waterproof case into place.

You will hear a click when the cover of the waterproof case is locked in place.

Remove the DVR from the waterproof case

1. Open the cover of the waterproof case.

2. Remove the DVR form the waterproof case.

Mount your DVR

Follow the steps below to mount your DVR. Remember to power off your DVR before mounting it.

For car use

You need the following accessories to mount your DVR for car use.

•Prestigio DVR

•Suction mount

•Anti-slide pad

•Accessory for flat installation

USER MANUAL RoadRunner PCDVRR700X

For flat surfaces

You need the following accessories to mount your DVR for a flat surface.

•Prestigio DVR

•Accessory for flat installation

•Waterproof case if necessary

•Bracket if necessary

For outdoor sports

You need the following accessories to mount your DVR for a bicycle use.

•Prestigio DVR

•Bicycle bracket

•Waterproof case

•Accessory for flat installation

•Waterproof case if necessary

•Bracket if necessary

Be careful not to damage your fingernails when you mounting your DVR.

Power on your DVR

Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR goes

to preview mode at this time.

To turn off your DVR, slide the Power Switch to OFF.

USER MANUAL RoadRunner PCDVRR700X

3. Basics

Charge the battery

A new battery is partially charged. Do the following to charge the battery:

Use the adapter

1. Plug the small end of the charger into the USB port of the device, and plug

the large end to the

adapter.

2. Plug the adapter into an electric socket

3. After fully charging, disconnect the device from the charger. First unplug the charger from the

device, and then unplug it from the electric socket.

Use the car charger

1. Plug the small end of the charger into the USB port of the device, and plug the large end to the

car charger.

2. Plug the car charger to your car.

3. After fully charging, disconnect the device from the charger. First unplug the charger from the

device, and then unplug it from the car.

Always use authentic accessories as they enable your battery to perform at its peak.

Nonauthentic accessories (eg. chargers) can damage your battery and even your DVR.

•Keeping the charger plugged to the DVR when the battery is fully charged will not damage

the battery. The only way to turn off the charger is to unplug it, so it is advisable to use an

easily accessible power socket.

•If you do not intend to use your DVR for several days, we recommend that you remove

the battery.

•If a fully charged battery left unused, it will lost its charge over time.

• If a battery is being used for the first time or the battery has not been used for a

prolonged period, it may take longer time to recharge.

Connect to your PC

You may need to connect your DVR to the PC in order to complete activation. Your DVR’s USB port

lets you exchange media and other files with a connected PC.

•Connect your DVR to the PC using the supplied USB cable.

Load files to your PC

1. Connect your DVR to the PC by using the USB cable.

2. Switch on your DVR.

3. Copy video and photos from the device to the PC.

USER MANUAL RoadRunner PCDVRR700X

Connect to your TV or Monitor

Your car DVR’s HDMI cable lets you watch the videos and view photos on your TV.

•Connect your DVR to the TV by using the supplied HDMI cable.

•Connect your DVR to the TV by using the supplied AV cable.

Status icons on the segment screen

The icons in the status bar on the segment screen give information about your DVR:

Icons What it means

The video recording mode is activated.

The DVR is capturing a photo.

The voice recording mode is activated.

The DVR is powerd on.

The capacity of the memory card.

Battery power level.

The DVR is connected to a PC.

USER MANUAL RoadRunner PCDVRR700X

4. Video record

With your DVR, you can record high-quality videos, which can be the evidence

when the accident happens.

Please confirm that there is a memory card connected before video recording.

Camcorder settings

Before recording videos, customise your camcorder settings.

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [M] to enter settings.

3. Press [<] or [>] to select Camcorder. The following options are available.

- Resolution: Choose the resolution for the recorded videos - 1080P, 720/60, 720/30 or WVGA.

- Laser Sync: Turn on or off laser transmitter.

- Capture Mode: Select video recording " " or voice recording " ".

- Loop Record: Turn on or off loop record.

- Duration: Set the video duration.

4. Use the [+] or [-] button to select the desired option.

5. Press [OK] if your want to set the desired item.

6. Select the parameter by pressing [<] or [>].

7. Press [OK] to confirm your selection.

8. Press [M] again to go back to preview mode.

Record videos

1. Slide the Power Switch to ON to power on your DVR.

2. Use the [+] or [-] button to zoom in or zoom out.

3. Aim your camera lens to the subject.

4. Press the Record button to start recording.

5. Press the Record button again to stop recording and save the file.

Start recording by voice control

There is a VOX switch on your DVR. Slide the VOX Switch to ON to enter voice control mode, your

DVR will start recording automatically when the voice decibel is higher than 70dB.

1. Slide the Power Switch to ON to power on your DVR.

2. Press [M] to set your DVR if necessary.

3. Slide the VOX Switch to ON to activate voice control.

4. The DVR will start recording automatically if the decibel is higher than 70dB.

USER MANUAL RoadRunner PCDVRR700X

5. Photo capture

With your DVR, you can capture photos in burst, which can be the evidence

when the accident happens.

Please confirm that there is a memory card connected before photo capturing.

Camera settings

Before capturing photos, customise your DVR settings.

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [M] to enter settings.

3. Press [<] or [>] to select Camera. The following options are available.

- Single Shot: Take single photo while pressing the capture button.

- Tripple Shot: To take three photos by pressing Capture button once.

- Continuous: Take one photo every 2S/3S/5S/10S/20S/30S untile you press capture button

again.

- Self Shot: Select a time span for auto photographing.

- Resolution: Set the resolution of photos.

4. Use the [+] or [-] button to select the desired option.

5. Press [OK] if your want to set the desired item.

6. Select the parameter by pressing [<] or [>].

7. Press [OK] to confirm your selection.

8. Press [M] again to go back to preview mode.

Take a photo

1. Slide the Power Switch to ON to power on your DVR.

2. Aim your camera lens to the subject.

3. Press the Capture button.

Take continuous shots

With your DVR, you can take continous shots by just pressing the Capture button once.

1. Press [M] to enter settings.

2. Press [<] or [>] to select Camera.

3. Use the [+] or [-] button to Continuous.

4. Press [OK] and then press [<] or [>] to choose the time span for continuous capturing.

5. Press [M] again to go back to preview mode.

6. Press the Capture button.

7. If you want to stop capturing, press the Capture button again.

Take a photo of yourself

1. Press [M] to enter settings.

2. Press [<] or [>] to select Camera.

3. Use the [+] or [-] button to Self Shot.

4. Press [OK] and then press [<] or [>] to choose the time span for self capturing.

5. Press [M] again to go back to preview mode.

6. When you’re ready to take the photo, press the Capture button.

USER MANUAL RoadRunner PCDVRR700X

6. Vioce Record

Please confirm that there is a memory card connected before vioice

recording.

Record voice

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [M] to enter settings.

3. Press [<] or [>] to select Camcorder.

4. Use the [+] or [-] button to select Capture Mode.

5. Press [OK] and then press [<] or [>] to choose voice recording " "

6. Press [OK] to confirm your selection.

7. Press [M] again to go back to preview mode.

8. Press the Record button to start recording.

9. Press the Record button again to stop recording and save the file.

Start recording by voice control

There is a VOX switch on your DVR. Slide the VOX Switch to ON to enter voice control mode, your

DVR will start recording automatically when the voice decibel is higher than 65 dB.

1. Slide the Power Switch to ON to power on your DVR.

2. Press [M] to set your DVR if necessary.

3. Slide the VOX Switch to ON to activate voice control.

4. The DVR will start recording automatically if the decibel is higher than 65dB.

USER MANUAL RoadRunner PCDVRR700X

7. Multimedia

You can watch the videos and view the photos taken by the DVR.

You need to connect the Segment screeen to your DVR to watch the

videos and view the photos.

Watch a video

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Record.

4. Press [<] or [>] to scroll among the files.

5. Press [OK] to start or stop playing the selected video.

6. To exit and go back to preview mode, press [ ] again.

Listen to a voice

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Record.

4. Press [<] or [>] to scroll among the files.

5. Press [OK] to start or stop playing the selected voice file.

6. To exit and go back to preview mode, press [ ] again.

View your photos

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Capture.

4. Press [<] or [>] to scroll among the photos.

5. To exit and go back to preview mode, press [ ] again.

Start a slideshow

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Capture.

4. Press [M] and then use [<] or [>] to select Autoplay.

5. It will start a slideshow.

USER MANUAL RoadRunner PCDVRR700X

8. File management

Delete a file

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer

beep. Your DVR goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Record or Capture.

4. Press [<] or [>] to scroll among the files.

5. Press [M] and then use [<] or [>] to select Delete one.

6. Use the [+] or [-] button to select .

7. Press [OK] to delete the selected file.

Delete all files

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Record or Capture.

4. Press [<] or [>] to scroll among the files.

5. Press [M] and then use [<] or [>] to select Delete all.

6. Use the [+] or [-] button to select .

7. Press [OK] to delete all the files.

Protect your file

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Record or Capture.

4. Press [<] or [>] to scroll among the files.

5. Press [M] and then use [<] or [>] to select Protect.

6. Press [OK] to protect or unprotect the file.

The icon " " will appear on the upper left corner of each protected file.

You can not delete the protect file unless you unprotect it or format the Micro SD cards.

Set DPOF for photos

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer beep. Your DVR

goes to preview mode at this time.

2. Press [ ] to enter playback mode.

3. Use the [+] or [-] button to select Capture.

4. Press [<] or [>] to scroll among the files.

5. Press [M] and then use [<] or [>] to select DPOF.

6. Use the [+] or [-] button to select .

7. Press [OK] to set DPOF to the photo.

The icon " " will appear on the upper left corner of the photo with DPOF.

USER MANUAL RoadRunner PCDVRR700X

About DPOF

DPOF (Digital Print Order Format) is a standard to record the print orders sent to the Micro SD

card. You can dedignate the photos to be printed and the number of their copies. After you set

DPOF to the photos, you just need to insert the Micro SD card into a DPOF compatible printer

to output the photos as ordered. The printer compatible with your camera can follow the DPOF

orders to print the photos.

•The DPOF printing requires a Micro SD card with preset DPOF information. It will fail if you

simply select the photos from the Micro SD card and try to print them.

•Some DPOF compatible and digital photo developing shops may fail to print the photos

based on the specific settings. If this is the case with your printer, please refer to the User

Manual attached to it. In another case, please check the DPOF compatibility with the

digital photo developing shop.

•If the DPOF information of the Micro SD card has been set by another device, please do

not insert this card into your DVR to reset the DPOF information, or the DPOF information

may be invalid or covered. Sometimes, special photo types make it impossible to set the

DPOF information.

USER MANUAL RoadRunner PCDVRR700X

9. Settings

Set up your DVR

Follow the steps to finish settings:

1. Slide the Power Switch to ON to power on your DVR. You will hear a buzzer

beep. Your DVR goes to preview mode at this time.

2. Press [M] to enter settings.

3. Press [<] or [>] to select Settings.

4. Use the [+] or [-] button to select the desired option.

5. Press [OK] if your want to set the desired item.

6. Select the parameter by pressing [<] or [>].

7. Press [OK] to confirm your selection.

8. Press [M] again to go back to preview mode.

Set up options

The following settings are available:

Options What it means

Beep Turn on or off beep.

REC. LED Turn on of off REC. LED.

Time Display Add date and time stamp to the videos, voices, and photos.

Auto Standby Choose a time span to power off your DVR automatically when there is no

operation.

TV Standard Choose the TV standard: NTSC or PAL.

Format Format the Micro SD card connected to your DVR.

Default Restore to default settings.

Language Select a language displayed on your DVR.

Frequency Select a band to avoid the impacts on photos caused by flickers from

lighting sources.

Date Set up the current time and date.

FW Check the firmware version of your current system.

USER MANUAL RoadRunner PCDVRR700X

10. Specifications

Item Specification

Viewing angles 170°

Sensor size 5.0 Mega CMOS sensor (2592*1944)

Recording resolution 1080P(1920x1080/30fps)

720P/60(1280x720/60fps)

720P/30(1280x720/30fps)

WVGA(848x480P)

Video format MOV

Picture format JPG

Battery 1000mAh Lithium Battery

Power consumption 350mA@ 3.7V (MAX)

Video recording duration About 2.5h

Voice recording duration About 3h

Voice control standby

duration

About 250h

Charging duration About 2.5h

Interfaces HDMI, USB, AV out, Micro SD card (Supports max 32GB, high-speed

Micro SD card recommended)

Remote control range 15 meters (MAX)

Operating temperature -10°C~ 50°C

Waterproof 60m

Weight 82g (without screen)/108g (with screen)

Dimension 60mmx51mmx42mm

Page is loading ...

Prestigio Multirunner 700x Owner's manual

Brand: Prestigio

Model: Multirunner 700x

Category: Dashcam

Type: Owner's manual

This manual is also suitable for

RoadRunner 700X - PCDVRR700X

Download PDF

report

Prestigio Multirunner 700x Owner's manual

This manual is also suitable for

Prestigio Multirunner 700x Owner's manual

Related papers

Other documents