Highwood AD-PORL2-BKE Installation guide

Type
Installation guide
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Lehigh Porch Swing
Assembly Guide
1) Attach Back to Seat Using
Two "A" Bolts in the Holes
on Each Side.
PORL1/2
05.18.17
A
2) Attach Braces to Center
Supports with Four "B" Bolts.
BACK
SEAT
BRACE
BRACE
A
A
B
CENTER SUPPORT
CENTER SUPPORT
1/4"-20 X 3"
x2
x8
x6
1/4"-20 X 1.5"
1/4"-20 X 2"
B
C
D
x2
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Lehigh Porch Swing
Assembly Guide
PORL1/2
05.18.17
C
C
BACK
BRACE
BRACE
ARM
BACK
A
B
D
D
3) Attach Braces to Back with
Two "C" Bolts.
4) Attach Arm Assembly to Seat
Using Two "B" Bolts in Front and
One "A" Bolt in Arm.
5) Repeat on Other Side.
6) Attach Chain Connector "D" to End of
2 Foot Chain.
7) Guide 7 Foot Chain Thru Hole in Arm
and Attach Other End of Chain
Connector "D" to 7 Foot Chain so that
Arm is Level as Shown.
8) Repeat on Other Side.
9) Attach Ends of 7 Foot Chain to
Structure.
ATTACH TO
STRUCTURE
7 FT CHAIN
2 FT CHAIN
7 Foot Chain
Thru Hole in Arm
  • Page 1 1
  • Page 2 2

Highwood AD-PORL2-BKE Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI