One Stop Gardens PORCH SWING 91491 Assembly & Operating Instructions

Brand: One Stop Gardens

Model: PORCH SWING 91491

Type: Assembly & Operating Instructions

One Stop Gardens PORCH SWING 91491 is a sturdy and stylish addition to any porch or patio. This swing is made from durable hardwood and features a comfortable contoured seat and backrest. The swing is easy to assemble and can be hung from a sturdy support beam or tree branch. It has a maximum weight capacity of 500 pounds and is perfect for relaxing and enjoying the outdoors. The swing also comes with a 1-year warranty.

ASSEMBLY & OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

2004 by Harbor Freight Tools

any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

PORCH SWING

91491

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please

complete the owner’s record below:

Model

______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the

entire manual to become familiar with the unit BEFORE you begin assembly.

Technical Specifications

Overall Dimensions: 48-1/2” L x 18-3/4” W x 20-1/4” H

Arms: 18-3/8” L x 2-1/8” W

Backrest: 48-1/2” L x 14” H

Seat: 48-1/2” L x 17”

Chain: 43” L

Hanging Hooks: 4-1/2” L x 1-1/4” W

Weight; 38.1 Lbs

Material: Hardwood

Maximum Weight Capacity: 500 Lbs.*(see Dynamic Loading Warning, Page 3)

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1. Keep work area clean. Cluttered areas invite injuries.

2. Check for damaged parts. Before using any product, any part that appears damaged should

be carefully checked to determine that it will operate properly and perform its intended function.

Check for any broken or damaged parts and any other conditions that may affect its operation.

Replace or repair damaged or worn parts immediately.

3. Replacement parts and accessories. When servicing, use only identical replacement parts.

Use of any other parts will void the warranty.

4. Always check hardware and assembled parts after assembling. All connections should be

tight and hardware tightened.

5. Keep children away. Children must never play with the Porch Swing. Do not allow children

to stand upon or climb on the Porch Swing. Children sitting on the Porch Swing must never be

left unattended.

6. Dress properly. Gloves and nonskid footwear are recommended when assembling the Porch

Swing. Wear restrictive hair covering to contain long hair.

7. Use eye protection. Always wear ANSI approved impact safety goggles when assembling

this product.

8. Maintain products with care. Keep the Porch Swing in a dry location. Excessive moisture

may corrode the hooks and chain. Always check the hooks and chain prior to using.

9. There are certain applications for which this Porch Swing was designed. Do not modify

this Porch Swing and do not use this Porch Swing for a purpose for which it was not intended.

10. Do not swing hard or jump onto the Porch Swing as this may break the chain or cause

damage to the chain and hooks.

SKU 91491 Page 2

11. Be aware of dynamic loading! If a person jumps or falls onto the Swing, it will create, for a

brief instant, an excess load, which may result in damage to the Porch Swing, the hooks and

the chains, and may result in personal injury.

12. Do not use or assemble the Porch Swing if under the influence of alcohol or drugs.

Read warning labels on prescriptions to determine if your judgement or reflexes are impaired

while taking drugs. If there is any doubt, do not assemble or use the Porch Swing.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot

cover all possible conditions and situations that may occur. It must be understood by

the operator that common sense and caution are factors which cannot be built into

this product, but must be supplied by the operator.

Assembly/ Operation

Your Porch Swing will require complete assembly. It is important that you read the entire manual to

become familiar with the product BEFORE you use the Porch Swing. Before assembling the Porch

Swing be sure that you have all parts described in the Parts List and Assembly Diagram located on

the last pages of this manual.

1. To attach the Left Side Elbow Rest (8) to the Seat (6), set the slats of the Left Side Elbow

Rest (8) into the space between the Chain Hooks (11) as in Figure 1. Line up the holes and

insert Screw (1) with Washer (5) into the Left Side Elbow Rest (8). Once the Screw (1) is

through the Seat (6), slide on Washer (4) and Nut (3). Hand tighten Nut (3) into place.

2. Repeat Step 1 to attach the Right Side Elbow Rest (9) to the rest ot the Seat.

3. Attaching the Back (7) to the Seat (6) and Elbow Rests (8 & 9). The Seat (6) has two slats

which extend out past its edge-this is the rear of the Seat (6). Set the Back (7) so that its

legs line up with the slats on the Seat (6). Line up the holes and set the Back (7) so that

the cut in the rear of the Elbow Rests (8/9) fits over the legs of the Back (7)-see Figure 2.

Insert Bolt (2) with Washer (5) through the leg of the Back (7) and through the

Elbow Rest (8/9) then slide on Washer (5) and Nut (3). Tighten Nut into place.

SKU 91491 Page 3

Seat (6)

Back (7)

Chain (10) connects to Chain Hooks (11)

Figure 1

4. Now that the assembly is complete, make certain that the Porch Swing is properly aligned

and that all hardware is fully tightened.

5. Before hanging the Porch Swing, make certain that the Chain Hooks (11) face outward, turn

the Chain Hooks (11) if they do not face the proper direction. Make certain that the Chain

Hooks (11) are screwed in all the way. To help you locate the exact center chain link (to

assure that the Porch Swing hangs evenly), the Chain (10) links are painted red at the middle

link and at both ends. Slide the Chain (10) onto the Chain Hooks (11).

6. When hanging the Porch Swing you will need to securely fasten a

J-Hook (not included) that includes a safety clasp, to a solid surface that is part of a

solid structure. This structure and solid surface, along with the J-hook must be able

to support the weight of the Porch Swing as well as the weight of the people sitting in

the Porch Swing. Do not exceed the maximum weight capacity of 500 Lbs.

Note: Failure to hang the Porch Swing properly risks the possibility of the Porch

Swing separating and dropping away from its support, possibly resulting in severe

personal injury and property damage.

When installing the Porch Swing, use a J-Hook with a safety clasp (not included) to secure

to the Chain (10) of the Porch Swing. If additional chain is used (not included), it must be

1/4” in diameter and of equal or greater strength than the included Chains (10). Before each

use, check the hooks and chains and make certain there is no damage. Never try to repair

a damaged chain. A damaged chain or hooks should be replaced immediately.

7. Wood water repellent and varnishing are recommended to prolong the life of the wooden

components.

Back (7)

Right Side Elbow Rest (9)

Screw (1) and Washer (5)

Washer (4) and Nut (3)

Screw (2), Washer (5),

Washer (4) and Nut (3)

Figure 2

SKU 91491 Page 4

Assembly/Parts Diagram

3,4,5,2

1,4,5,3

1,5,4,3

2,5,4,3

3,4,5,1

SKU 91491 Page 5

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL

ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO

THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO

REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT

ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT

BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL

PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS

THERETO.

Unpacking

When unpacking the Porch Swing, check to make sure the following parts are included. If any parts

are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.

Parts List

Part # Description Quantity Part # Description Quantity

1 Screw M6 x 45 6 7 Back 1

2 Screw M6 x 60 2 8 Left Side Elbow-Rest 1

3 Nut 8 9 Right Elbow-Rest 1

4 Washer 16 10 Chain 2

5 Washer 8 11 Chain Hooks 4

6 Seat 1

Note: Some parts are listed and shown for illustration purposes only and are not available

individually as replacement parts.

One Stop Gardens PORCH SWING 91491 Assembly & Operating Instructions

One Stop Gardens PORCH SWING 91491 Assembly & Operating Instructions

One Stop Gardens PORCH SWING 91491 Assembly & Operating Instructions

Related papers

Other documents